Panel | ||||
---|---|---|---|---|
In this section:
|
...
Use this screen to configure the Other Requests policer.
On the SBC main screen, go to Configuration > System Provisioning > Security Configuration >Sip Cac SIP CAC Profile > Other Requests.
Select the desired Sip Cac SIP CAC Profile from the drop-down list to view its respective Other Requests parameters.
The Other Requests window is displayed.Figure 1: Security Configuration - Sip Cac Profile - Other Requests
The following fields are displayed:
Table 1: Other Requests Parameters:
Parameter | Length/Range | Description |
---|---|---|
Ingress Aggregate Preference |
1-10 | The preference for Other Requests within the ingress aggregate policer. |
The default value is 1. |
Ingress Burst Size |
1-10000 | The maximum burst size for ingress Other Requests. |
The default value is 1. |
Ingress Rate |
1-1000, or unlimited | The maximum ingress Other Requests rate in Other Requests per period. |
The default is unlimited. |
Ingress Rate Period |
1-10 | The |
time period (in seconds) over which ingress Other Requests rate applies. |
The default value is 1 second. |
Egress Aggregate Preference |
1-10 | The |
preference for Other Requests within the egress aggregate policer. |
The default value is 1. |
Egress Burst Size |
1-1000 | The |
maximum burst size for egress Other Requests. |
The default value is 1. |
Egress Rate |
1-1000, or unlimited | The maximum egress Other Requests rate in aggregate messages per period. |
The default is unlimited. |
Egress Rate Period |
1-10 | The |
time period (in seconds) over which egress Other Requests rate applies. |
The default value is 1 second. |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.