2 x 10/100/1000 Mbps RJ-45 Ethernet ports for WAN network connectivity (Copper).
SFP Link LEDs
Status
When lit, the SFP port is active and the copper RJ-45 port is inactive.
Optical WAN SFP Ports 1-2
WAN
Small Form-Factor Pluggable (SFP) for fiber
(RJ-45) Gigabit Ethernet
connectivity. Either the SFP port (operating at 100/1000 Mbps) or the RJ-45 (operating at 10/100/1000 Mbps) port can be active at a time.
LAN Ports 1-4
LAN
4 x 10/100/1000 Mbps RJ-45 Ethernet ports for LAN network connectivity (Copper). Default IP: 192.168.1.1
Line Ports 1-2
FXO
2 x RJ-11 ports for 2 FXO channels.
Phone Ports 1-6
FXS
6 x RJ-11 ports for 6 FXS channels.Erase
Erase
Erase button
Press the Erase button in quick succession to control the following:
One click—No action.
Two clicks—Resets the CLI password
with no service interruption
to what is stored in the manufacturing configuration.
Three clicks—Restores to factory default settings and reboots the system.
Info
title
Note
:
When restored to factory default settings, the current configuration is lost, disconnecting all VoIP devices, Internet connectivity, and network access for computers until the system is reconfigured.
Info
title
Note
If the Erase button is disabled (as noted on the Admin page of the GUI) and you wish to reset the password, please contact the Global Support Assistance Center:
RJ-45 serial craft port for console management. This port is used for debug or diagnostic purposes only. Primary system configuration is performed from a web browser as described in the EdgeMarc User Guide.
MicroSD Card Interface
Storage
Allows the
Spacevars
0
product
to save configurations and other files to a microSD High Capacity (microSDHC) Version 2.0. Maximum storage capacity is 32 GB per microSD card, 4 GB per file. The microSD card capabilities are configured with the web-based configuration menu and with command-line interfac(CLI). Refer to EdgeMarc 2900 Series MicroSD Card Features and Specifications.
