Page History

Anchor

	top
	top

Add_workflow_for_techpubs

AUTH1	UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'}
JIRAIDAUTH	SYM-19713
REV5	UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'}
REV6	UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'}
REV3	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cd700a1f, userName='null'}
REV4	UserResourceIdentifier{userKey=8a00a0c85c46b657015d4f57d577001c, userName='null'}
REV1	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26c7ca0038, userName='null'}

SBC Easy Configuration supports IPv4 only, not IPv6.

Tip

Using the Easy Configuration wizard to configure the

Spacevars

0	product

(SBC)

Tip

Usage of the Easy Config wizard to configure the Sonus SBC 1000/2000 does not modify existing configuration. The wizard will simply add the new configuration elements to the Sonus SBC 1000/2000.

Info

The Sonus SBC 1000/2000 Easy Config interface includes a built-in step-by-step setup configuration wizard, which enables end-users to quickly deploy Sonus SBC 1000/2000 and Skype for Business/Lync. The Sonus SBC 1000/2000 can be configured to connect a Skype for Business/Lync Microsoft UC environment to a SIP trunk using the automatic setup wizard as described in the section below.

The following SIP Trunks are supported:

ATT &T IP Flexible Reach
Generic SIP Trunk

Verizon Managed Service

SIP Trunk
KDDI SIP Trunk
NTT DOCOMO Officelink
Other SIP Trunk
Softbank White Office
Telstra Enterprise SIP Connect
Verizon SIP Trunk

Note
NTT DOCOM Officelink, Softbank White Office and Telstra Enterprise SIP Connect are supported in SBC Edge 1000-2000 only.

Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.

Table of Contents

maxLevel	3

Step 1 - Select Scenario

Note
These instructions assume the SBC Easy Config wizard is running. See Running Using the Easy Configuration Wizard.

Select the Application type (SIP ↔ Skype for Business/LyncMicrosoft UC). Enter the scenario configuration details based on your deployment settings. Once completed, click Next to move to Step 2 (or Cancel to return to the main WebUI screen).

Scenario Parameters - Field Definitions

...

Caption

0

...

Figure

...

1

...

Step 1

...

Image Added

Application

Panel

bgColor	#FAFAFA
borderStyle	none

The scenario in which the configuration template is provided. In this case, select SIP Trunk ↔ Skype for Business/LyncMicrosoft UC.

Scenario Description

Panel

bgColor	#FAFAFA
borderStyle	none

Enter the name to describe Skype for Business/Lync Microsoft UC setup.

Info
This value will be prefixed on all the Sonus SBC 1000/2000 configuration elements created by the Setup Wizard pertaining to this deployment.

Telephone Country

Panel

bgColor	#FAFAFA
borderStyle	none

The country in which the SIP ↔ Skype for Business/LyncMicrosoft UC setup originates.

Emergency Services

Note
The E911 Elin number from the "CompanyName" field configured in Lync location services is used as the authoritative Call Back number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Lync Setup. For more information, see Creating and Modifying Entries to Transformation Tables.

Panel

bgColor	#FAFAFA
borderStyle	none

Defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below.

Options: ELIN Identifier, E911/E112 or None.

Emergency Callback Number 1

Panel

bgColor	#FAFAFA
borderStyle	none

Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.

Emergency Callback Number 2

Panel

bgColor	#FAFAFA
borderStyle	none

Second Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.

PSAP Number

Panel

bgColor	#FAFAFA
borderStyle	none

Defines the Public Safety Answering Point Number. Valid entry 1 - 127 characters.

SIP Sessions

Panel

bgColor	#FAFAFA
borderStyle	none

Number of simultaneous SIP sessions allocated. Valid entry 1 - 960.

Name (SIP Trunk)

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP trunk used for connection to the Skype for Business/Lync Microsoft UC environment. Valid options : Generic SIP Trunk, AT&T IP Flexible Reach, and Verizon Managed Serviceare: ATT SIP Trunk, KDDI SIP Trunk, NTT DOCOMO Officelink, Other SIP Trunk, SoftBank White Office, Telstra Enterprise SIP Connect, and Verizon SIP Trunk.

The SIP Trunk selected determines the field options displayed in Step 2. See See Step 2 - Configure SIP Details for Endpoint.

Version (Microsoft UC)

Panel

bgColor	#FAFAFA
borderStyle	none

Defines the version of Skype for Business LyncMicrosoft UC. Valid options: Skype for Business or , Lync 2010/2013.

Noprint
Back to top

or Microsoft Cloud Connector Edition

Step 2 - Configure SIP Details for Endpoint

Enter the scenario configuration details based on the SIP Trunk selected in Configure SIP Trunk with Skype for Business/Lync Step 1 - Select Scenario. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).

...

ATT SIP Trunk - Field Definitions

These fields apply if you selected Generic SIP Trunk in Configure SIP Trunk with Skype for Business/Lync.

...

width	600px

...

ATT SIP Trunk in Step 1 - Select Scenario.

Caption

0	Figure
1	ATT SIP Trunk

Image Added

Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

The FQDN or IP address of the Session Border Controller service provider.

Protocol (Border Element Server)

Panel

bgColor	#FAFAFA
borderStyle	none

The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP.

Port

...

Number (Border Element Server)

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server.

Use Secondary Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

Enables or disables the secondary Session Border Controller service provider configured.

Secondary Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.

Protocol (Secondary Border Element Server)

Panel

bgColor	#FAFAFA
borderStyle	none

The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.

Port Number (Secondary Border Element Server)

Panel

bgColor	#FAFAFA
borderStyle	none

The Port Number is used for sending and receiving messages between Sonus SBC 1000/2000 and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled.

AT&T Forking Feature

Panel

bgColor	#FAFAFA
borderStyle	none

Enables/disables AT&T Forking Feature. Valid option: Yes or No.

AT&T IP Toll Free

Panel

bgColor	#FAFAFA
borderStyle	none

Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled.

IP Toll Free Access Number

Panel

bgColor	#FAFAFA
borderStyle	none

The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled.

Server Pool Host

Panel

bgColor	#FAFAFA
borderStyle	none

The Pool name of the Lync Server (FQDN).

Protocol (Server Pool)

Panel

bgColor	#FAFAFA
borderStyle	none

The IP protocol used to use for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Host. Valid entry: TLS or TCP.

Port Number (Server Pool)

Panel

bgColor	#FAFAFA
borderStyle	none

The Port Number (via TLS or TCP) used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Host.

Pagebreak

KDDI SIP Trunk - Field Definitions

These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.

Caption

0	Figure
1	KDDI SIP Trunk
3	KDDI SIP Trunk

Image Added

SIP Server

Panel

bgColor	#FAFAFA
borderStyle	none

The FQDN or IP address of the Session Border Controller service provider.

Protocol

Panel

bgColor	#FAFAFA
borderStyle	none

Hardcoded to UDP.

Port Number

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.

Called Prefix

Panel

bgColor	#FAFAFA
borderStyle	none

Used for setting up transformation rules for the FMC service.

Address of Record URI

Panel

bgColor	#FAFAFA
borderStyle	none

Address of Record of the client that is registered on the SIP server.

Static Host

Panel

bgColor	#FAFAFA
borderStyle	none

Specifies the host portion of the FQDN used in the From Header.

Noprint
Back to top

...

Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port

Pagebreak

Authentication ID

Panel

bgColor	#FAFAFA
borderStyle	none

Specifies a user name to use in response to a challenge.

Password

Panel

bgColor	#FAFAFA
borderStyle	none

The password for the Authentication ID.

Confirm Password

Panel

bgColor	#FAFAFA
borderStyle	none

Re-enter the password for the Authentication ID.

DNS Server IP

Panel

bgColor	#FAFAFA
borderStyle	none

IP address (IPv4 or IPv6) of the DNS server.

Domain Name

Panel

bgColor	#FAFAFA
borderStyle	none

Domain name associated with the DNS IP address.

Port Type

Panel

bgColor	#FAFAFA
borderStyle	none

Specifies the physical T1/E1 port used for this Signaling Group. Valid option: T1 or E1.

DS1 Ports

Panel

bgColor	#FAFAFA
borderStyle	none

The physical T1/E1 port number to which the PSTN line is physically connected. DS1 entries are configured with the following command buttons: Up (move a DS1 port up in the list), Down (move a DS1 port down in the list), Add (adds a DS1 port), and Remove (deletes a DS1 port).

For example, click Add. Select the desired PSTN port and OK.

Caption

0	Figure
1	Select ISDN Ports

Image Added

Switch Variant

Panel

bgColor	#FAFAFA
borderStyle	none

Specifies the ISDN variant for the port type in the ISDN Signaling Group.

For T1

ATT 4EES
ATT 5EES
DMS 100
N12
Euro ISDN
QSIG
Japanese ISDN

For E1:

Euro ISDN
QSIG

ISDN Number Translation

Panel

bgColor	#FAFAFA
borderStyle	none

Determines if the SBC should translate dialed PSTN digits as phone extensions. Valid options: Translation Extension (translates digits into phone extensions) or Passthrough Untranslated (does not translate digits).

PBX Prefix

Panel

bgColor	#FAFAFA
borderStyle	none

The numbers to prefix for the translated phone extension. This field is available only when ISDN Number Translation is set to Translation Extension.

Extension Length

Panel

bgColor	#FAFAFA
borderStyle	none

The number of digits used to account for the PSTN extension. Valid options: 2, 3, 4, or 5.This field is available only when ISDN Number Translation is set to Translation Extension.

Pagebreak

NTT DOCOMO Officelink- Field Definitions

These fields apply if you selected AT&T IP Flexible Reach in Configure SIP Trunk with Skype for Business/Lync.

...

NTT DOCOMO Officelink in Step 1 - Select Scenario.

Caption

0	Figure
1	NTT DOCOMO Officelink Trunk

Image Added

Office Link FOMA-R

Panel

bgColor	#FAFAFA
borderStyle	none

The Host IP address of the SIP Server.

Protocol

Panel

bgColor	#FAFAFA
borderStyle	none

The IP protocol used for sending and receiving SIP messages between SBC and the SIP Server. Default value: UDP.

Port Number

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP Server Port number used for sending and receiving SIP messages between SBC and the SIP Server. Default value: 5062.

CUG Domain Name

Panel

bgColor	#FAFAFA
borderStyle	none

The FQDN of the SIP Server.

Server Pool Host

Panel

bgColor	#FAFAFA
borderStyle	none

The Pool FQDN or IP Address of the Lync Server (FQDN).

Protocol

Panel

bgColor	#FAFAFA
borderStyle	none

The IP protocol to use for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP.

Port number

The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. Default value: 5067.

Other SIP Trunk - Field Definitions

These fields apply if you selected Other SIP Trunk in Step 1 - Select Scenario.

Caption

0	Figure
1	Other SIP Trunk

Image Added

...

width	600px

...