...
Before You Start
| Caption |
|---|
|
| A public domain name prepared and mapped with your Office 365 tenant. See Create an Office 365 Tenant. | | An entry on your public domain name that points to the fixed IP address of your . | An Office 365 tenant with an E5 license or E3 + Cloud PBX. |
|
...
...
Administrator role for your O365 tenant account. | A public certificate authority ready to sign a certificate for the . |
|
...
A properly configured firewall. See Ports and Protocols at Microsoft Technet.
...
Latest SBC Firmware.
A properly configured firewall. See Ports and Protocols at Microsoft Technet. | Latest System Release SBC Firmware. | Warning |
|---|
| - Refer to the SBC Edge Release Information page for instructions on obtaining the latest firmware.
- Failure to update to the latest firmware could lead to deployment failure.
- Make sure to use the latest release (use X.X.459 rather than X.X.0, for example).
|
| Latest System Release SbcComms Firmware. | Warning |
|---|
| - Refer to the SBC Edge Release Information page for instructions on obtaining the latest firmware.
- Failure to update to the latest firmware could lead to deployment failure.
- Make sure to use the latest release (use X.X.459 rather than X.X.0, for example)
|
|
|
...
| Microsoft Cloud Connector Edition image 1.4.1 on |
|
...
CCE Deployment Scenarios
The following diagram shows typical CCE deployment scenarios on a PSTN site. The PSTN site is a combination of Cloud Connector instances, deployed at the same location, and with common PSTN gateways pool connected to them. PSTN sites allow you to:
...
Scenario 1 and Scenario 2 are covered in Configuring the SBC Edge for a Single CCE. This document contains steps for Scenario 3 and Scenario 4 . | Noprint |
|---|
Back to Top
Network Settings
For this best practice, the CCE is deployed in the following network:
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Typical Deployments |
|---|
|
|
...