Page History
...
| Section | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Application
...
| Panel | ||||
|---|---|---|---|---|
| ||||
| Defines the version of Microsoft UC. Valid options: Skype for Business or , Lync 2010/2013. or Microsoft Cloud Connector Edition |
| Noprint |
|---|
Step 2 - Configure SIP Details for Endpoint
...
| Panel | ||||
|---|---|---|---|---|
| ||||
The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCPHardcoded to UDP. |
Port Number
| Panel | ||||
|---|---|---|---|---|
| ||||
The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. |
...
Called Prefix
| Panel | ||||
|---|---|---|---|---|
| ||||
Used for setting up transformation rules for the FMC service. |
Address of Record URI
| Panel | ||||
|---|---|---|---|---|
| ||||
Address of Record of the client that is registered on the SIP server. |
Static Host
| Panel | ||||
|---|---|---|---|---|
| ||||
Specifies the host portion of the FQDN used in the From Header. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port |
Authentication ID
| Panel | ||||
|---|---|---|---|---|
| ||||
Specifies a user name to use in response to a challenge. |
Password
| Panel | ||||
|---|---|---|---|---|
| ||||
The password for the Authentication ID. |
Confirm Password
| Panel | ||||
|---|---|---|---|---|
| ||||
Re-enter the password for the Authentication ID. |
DNS Server IP
| Panel | ||||
|---|---|---|---|---|
| ||||
IP address (IPv4 or IPv6) of the DNS server. |
Domain Name
| Panel | ||||
|---|---|---|---|---|
| ||||
|
...
Domain name associated with the DNS IP address. |
Port Type
| Panel | ||||
|---|---|---|---|---|
| ||||
Specifies the physical T1/E1 port used for this Signaling Group. Valid option: T1 or E1. |
DS1 Ports
| Panel | ||||
|---|---|---|---|---|
| ||||
The Pool name of the Lync Server (FQDN). |
...
physical T1/E1 port number to which the PSTN line is physically connected. DS1 entries are configured with the following command buttons: Up (move a DS1 port up in the list), Down (move a DS1 port down in the list), Add (adds a DS1 port), and Remove (deletes a DS1 port). For example, click Add. Select the desired PSTN port and OK.
|
Switch Variant
| Panel | ||||
|---|---|---|---|---|
| ||||
Specifies the ISDN variant for the port type in the ISDN Signaling Group. For T1
For E1:
|
ISDN Number Translation
| Panel | ||||
|---|---|---|---|---|
| ||||
Determines if the The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Hostshould translate dialed PSTN digits as phone extensions. Valid entry: TLS or TCP. |
...
options: Translation Extension (translates digits into phone extensions) or Passthrough Untranslated (does not translate digits). |
PBX Prefix
| Panel | ||||
|---|---|---|---|---|
| ||||
The numbers to prefix for the translated phone extension. This field is available only when ISDN Number Translation is set to Translation Extension. |
Extension Length
| Panel | ||||
|---|---|---|---|---|
| ||||
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Hostnumber of digits used to account for the PSTN extension. Valid options: 2, 3, 4, or 5.This field is available only when ISDN Number Translation is set to Translation Extension. |
| Noprint |
|---|
Step 3 - Confirm and Submit Configuration
...
Overview
Content Tools