Page History

...

1. In the WebUI, access SIP > SIP Server Tables.
   
   
2. Create a Lync Presence Server. Use the example below as a guideline for configuration.
   
   
3. From the TLS Profile drop down list, select Default TLS Profile (ensure the Default TLS profile has the Mutual Authentication parameter set to Enabled; see Creating and Modifying TLS Profiles).
   
   
4. In the Port field, enter 5061.

Step 2. Enable Skype/Lync Presence

...

1. In the WebUI, access SIP >Node-Level SIP Settings.
   
   
2. From the Presence Destination drop-down menu, select a Presence Server (i.e., Lync Presence Server). This is the server configured in the previous section.

Step 3. Define AD Configuration/Domain Controller for AD Cache Look Up

...

1. In the WebUI, access Auth and Directory Services >Configuration.
   
   
2. Configure as shown in the example below. For detailed information about Active Directory, see Integrating with Active Directory.

Configure Domain Controller (DC)

...

1. In the WebUI, access Auth and Directory Services >Domain Controllers.
   
   
2. Add a Domain Controller.
   
   
3. Configure as shown in the example below. For detailed information about Domain Controllers, see Adding and Modifying Domain Controllers.

Step 4. Configure Transformation Entries for Presence

...

Step 5. Define An Action Configuration

...

1. In the WebUI, access Call Actions > Action Configuration.
   
   
2. Create an entry in the Action Configuration Table as shown in the example below.  For detailed information about the Call Actions, see Managing Action Configurations.

Step 6. Define An Action Set for Presence

...

1. In the WebUI, access Call Actions > Actions Sets.
   
   
2. Create an Action Set (i.e., Presence) as shown in the example below.  For detailed information about the Call Actions, see Managing Action Configurations.

Step 7. Attach An Action Set To The Desired Signaling Group(s)

...

1. In the WebUI, access Signaling Groups.
   
   
2. Select the Signaling Group in which the Actions Set will be attached.
   
   
3. In the Action Set Table drop down list, select the Action Set (i.e, Presence). For detailed information about the Call Actions, see Managing Action Configurations.

Configure Lync Server

...