If you are downgrading from 2.0.x (or later) to → 1.3.x (or earlier), all disabled Network Adapters on the ASM must be enabled. This is because the 2.0.x (or later) upgrade disables one of the network adapters (by design), and it must be re-enabled if you're downgrading to 1.3.x (or earlier). Expand |
---|
| *Step 1*: Click here to view the instructions for enabling the network adapter |
---|
| *Step 1*: Click here to view the instructions for enabling the network adapter |
---|
| - From the Start menu - type View network connections and select it
You will find at least one disabled network adapter. Enable it as shown below: Caption |
---|
0 | Figure |
---|
1 | Enable Network Adaptor |
---|
| Image Modified |
|
Once the network adapter is enabled, you must set the necessary permissions to allow the downgraded Communication Service to Install ASM packages via the Sonus WebUI. Expand |
---|
| *Step 2*: Click here to view the instructions for setting the permissions |
---|
| *Step 2*: Click here to view the instructions for setting the permissions |
---|
| - From the Start menu - type Command Prompt and select it
Enter (or paste in) the following commands - the order is important: Code Block |
---|
| nfsadmin server deletegroup Sonus SBC 1000/2000
nfsadmin server creategroup Sonus SBC 1000/2000
nfsadmin server addmembers Sonus SBC 1000/2000 169.254.1.1
nfsshare public -o rw=Sonus SBC 1000/2000 root=Sonus SBC 1000/2000
|
The results should appear like so: Code Block |
---|
| C:\Users\Administrator>nfsadmin server deletegroup Sonus SBC 1000/2000
The settings were successfully updated.
C:\Users\Administrator>nfsadmin server creategroup Sonus SBC 1000/2000
The settings were successfully updated.
C:\Users\Administrator>nfsadmin server addmembers Sonus SBC 1000/2000 169.254.1.1
169.254.1.1 was successfully added to Sonus SBC 1000/2000.
The settings were successfully updated.
C:\Users\Administrator>nfsshare public -o rw=Sonus SBC 1000/2000 root=Sonus SBC 1000/2000
Public was modified successfully
|
|
|