Page History

...

1. In the WebUI, click the Settings tab.

2. In the left navigation pane, go to System > Software Management > Boot Partition.

   Note
   icon false title Important Note:
   Remember that you are upgrading the Boot partition and not the Application partition.

   Panel
   borderStyle none
   Caption 0 Figure 1 Boot Partition Image Modified

    

    

3. Click the Upload Boot Imagelink located on the top right hand side of the pane.

   Panel
   borderStyle none
   Caption 0 Figure 1 Upload Boot Image Image Modified

4. Under Select File, click the Browse button and select the Sonus SBC 1000/2000 Boot image to which you wish to upgrade.

5. Click OK.
   Throughout the upload process, the web interface will dispatch a series of status messages: click image thumbnails to see them in full resolution

    

   Section
   Column Panel borderStyle none Align align center (1) Upgrading the Boot Image (approx. 2 mins)

    

    

   Image Added Column Panel borderStyle none Align align center (2) Boot Image Successfully Upgraded

    

   Image Removed

   Image Modified

6. Once the upgrade has completed, click Close.

7. On the Boot Partition page, verify that the Last Upload Status is listed as Success

   Panel
   borderStyle none
   Caption 0 Figure 1 Verify Last Upload Status Image Modified

After the Boot Image is successfully upgraded, you must reboot the Sonus SBC 1000/2000 for the changes to take effect.