Packet Front-End for Cloud Native SBC (CNe)Users can configure the networkSegment type "PFE" to set up the Packet Front-End for SBC CNe. Only the PFE and OAM network segment types are allowed in the PFE-based SBC CNe solution. The following parameters are added to the network segment table to support SBC CNe: - PFE ID
- applicationType
- rangeStart
- rangeEnd
- transport
- state
For more information on PFE for CNe, refer to: Packet Front-End for Cloud Native SBC Command Syntax Code Block |
---|
| % set system networkSegmentTable pfe-pkt0 networkSegmentType PFE pfeID <1-15> networkInterfaceName <pkt0 | pkt1> prefixV4 <0-32> vlanId <0-4095> ipNameV4 <name> ipList [list of space separated IPs]<IP Address> portRanges <range name> rangeStart <1-65535> rangeEnd <1-65535> applicationType <signaling | media | signalingGateway> transport <udp | tcp> state <enabled | disabled> |
Command Parameters Parameter | Length/Range | Description | M/O |
---|
pfeID | 1-15 | Packet Frontend ID to which the network segment is anchored. | M | applicationType | N/A | Application type used for Port Range signaling, Media, and Signaling Gateway. media signaling signalingGateway
| M | rangeStart | 1-65535 | Port range start value. | M | rangeEnd | 1-65535 | Port range end value. | M | transport | N/A | | M | state | N/A | State of the network segment table. disabled (Default)enabled
| M |
Configuration Examples Code Block |
---|
set system networkSegmentTable pfe-pkt0 networkSegmentType PFE pfeID 1 networkInterfaceName pkt0 prefixV4 23 vlanId 485
set system networkSegmentTable pfe-pkt0 ipNameV4 PFE_PKT0 ipList [ 10.161.116.50 ]
set system networkSegmentTable pfe-pkt0 portRanges range1 rangeStart 4096 rangeEnd 4607 applicationType signaling transport udp
set system networkSegmentTable pfe-pkt0 portRanges range2 rangeStart 4608 rangeEnd 6143 applicationType media transport udp
set system networkSegmentTable pfe-pkt0 portRanges range3 rangeStart 6144 rangeEnd 6655 applicationType signalingGateway transport udp
set system networkSegmentTable pfe-pkt0 state enabled
commit |
|