Page History
| Add_workflow_for_techpubs | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Choose VoIP > SIP > SIP UA > Distinctive Ring.
Configure settings using the information in the following table as a guide.
Caption 0 Table 1 FXS/Phone Port Distinctive Ring Configuration Parameters Item Description Distinctive Ring Rules
Manages the distinctive ring list.
Add a Distinctive Ring Rule
Configures distinctive rings for FXS/Phone ports. Distinctive ring rules are applied in the order in which they are defined. If a rule matches, the ring pattern defined for the rule is used to ring analog phones on the FXS/phone port.
Note: You cannot change the order in which rules are applied. If the order is not as desired, you must delete or redefine the existing rules.
Tip: Rules can include a mix of the digits and patterns listed in the following sections:
Action Adds or edits a rule. To add a new rule, choose Add new rule from the Action drop-down list. Caller Pattern Match Enter a caller pattern that triggers the distinctive ring. Called Pattern Match
Enter a pattern in the one or both of the following fields:
• Caller Pattern-match
• Called Pattern-match
Ring Type Choose a ring type from the Ring Type drop-down list:
• Ring-0 (default)
• Ring-1
• Ring-2
• Ring-3
• Ring-4
Click Add. The new entry is added to the Distinctive Ring Rules table.
Click Submit All to save your settings to the
.Spacevars 0 product2 - A message indicates that service will be temporarily interrupted. Click OK to confirm.
Overview
Content Tools