Panel | ||||
---|---|---|---|---|
In this section:
|
Use this object to specify use of domain names.
On the SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > IP Signaling Profile > Egress IP Attributes > Domain Name.
The Domain Name window is displayed. On the Domain Name window, select the Select the IP Signaling Profile from the drop-down list.
Figure 1: Trunk Trunk Provisioning - Egress Ip IP Attributes H323 Domian Domain Name
The Edit Domain Name window is displayed.
Figure 2: Trunk Trunk Provisioning - Egress Ip IP Attributes SIP Domain Name
The following fields are displayed:
Table 1: Egress IpEgress IP Attributes Domain Name Parameters
Parameter | DescrIPtionDescription | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Use SIP Domain Name In From Field | By default,
When the "Use SIP Domain Name In From Field" is enabled, the following parameters are available:
Enable
| ||||||||||||||
Use SIP Domain Name In Request URI | Use SIP Domain Name In Request URI Flag.
When Use SIP Domain Name In Request URI is enabled, the following parameters are available:
| ||||||||||||||
Use Zone Level Domain Name In Contact | Enable flag to use Zone level domain name in Contact header.
| ||||||||||||||
Use IP Signaling Peer Domain In Request URI | Enable flag to use IP Signaling Peer Domain in Request URI.
| ||||||||||||||
Use SIP Domain in PAIHeader | Enable this flag to set the value of host port of the PAI URI equivalent to the value of the SIP domain name, which is configured on the ingress trunk group of the Policy Exchange Server (PSX). The options are:
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.