Page History

...

• Instantiate EMS SWe instance with LI interface support using the EMS_SA_HEAT_TEMPLATE_<NAME> Heat Template. For more information, refer to "EMS Standalone Instantiation for Geographical Redundancy (GR) Deployment" topic in EMS documentation.
• Create a Configurator cluster. For more information, refer to "Creating an SBC SWe Configurator Cluster' in EMS documentation.

• Create a Configurator instance. For more information, refer to Instantiating SBC Configurator using Heat Template.

...

1. Log on to EMS as admin user.
   
2. Under Network Mgmnt, click Cluster / VNF Management. The Cluster/VNF Management window is displayed.

3. Create S-SBC cluster. For more information, refer to "Creating an SBC SWe Cluster" in EMS documentation .
   

4. Click Configurations tab.

5. Click New Configuration. The New Configuration pane is displayed.

   Caption
   0 Figure 1 New Configuration

6. Click Master Configurator tab.

7. Select the version of the configuration from the Version drop-down.
   

8. Select SBC Configurator instance from the Master Configurator drop-down.
   This node is used to create the configuration. The SBC Configurator nodes are displayed based on the version selected. Only unlocked SBC Configurator nodes are listed.
   

9. Enter a name for the configuration in the Configuration Name field. The SBC configuration name can contain only letters, numbers, dashes (-), apostrophes ('), underscores (_), colons (:) and spaces.
   

   Note
   The cluster ID is set as the default name for the first configuration. You can modify the name. The name must be unique. The subsequent configurations are named with a combination of cluster name and some unique identifying information. The default name varies based on how the configuration is created.

   
   

10. Click Create. A circular progress bar is displayed against the Master Configurator node. It takes around six minutes to load master configuration.

    When the Master Configurator node is loaded, the Open Editor button is displayed next to the Master Configurator node.

    Caption
    0 Figure 1 Open Editor

11. Click Open Editor. The SBC Configuration Manager window is displayed. 
    

    Caption
    0 Figure 1 SBC Configuration Manager

12. Create the basic S-SBC configuration on the SBC configurator. For information on S-SBC configuration, refer to "Creating an SBC SWe Cluster" topic in EMS documentation.

13. Click Apply Saved Changes and Close. A circular progress bar is displayed.

    The configuration is saved on the EMS SWe and the following window displays:

    Caption
    0 Figure 1 Locked Configurator
    .

14. Create CDC configuration (Proceed to Configuring CDC using EMS CALEA User Account below).

...

Enable calea user. For information, refer to "Enabling Lawful Intercept on EMS Standalone" topic in EMS documentation.

Configure Cluster CDC for Cloud S-SBC nodes

...