Page History

...

Info

title	Note

Verbs and modifiers are separated by hyphens ( - ), attribute fields (TID, AID, CTAG, and General Block) are separated by colons (:), and every command is terminated by a semicolon (;).

Any attribute that contains TL1 special characters [ equal signs ( = ), colons ( : ), dashes ( - ), and commas ( , ) ] should be enclosed in double quotes ( " ) to help the attribute values escape.

Refer to Input Command Structure for more information.

Pagebreak

IO Manager Command Groupings

...

Caption

0	Figure
1	IO Manager Objects Groupings

...

IO Manager

This section includes the following information for the I/O Manager:

...

Div

style	padding-left:3%;

DLT-IOCH-H110LSL

DLT-IOCH-H110LSL::[<IO Manager/Slot Number>]-[<LSL H110 Channel/Channel Number>]:[CTAG];

ADD-IOCH-H110LSL

ADD-IOCH-H110LSL::[<IO Manager/Slot Number>]-[<LSL H110 Channel/Channel Number>]:[CTAG];

CHG-IOCH-H110LSL

CHG-IOCH-H110LSL::[<IO Manager/Slot Number>]-[<LSL H110 Channel/Channel Number>]:[CTAG]:::::[CLLI=<string>],[CTBUS_TS_RX=<CTBusTS>],[CTBUS_TS_TX=<CTBusTS>],[BAUD_RATE=<Baud>],[LPBK_MODE=<EnableType>];

VFY-IOCH-H110LSL

VFY-IOCH-H110LSL::[<IO Manager/Slot Number>]-[<LSL H110 Channel/Channel Number>]:[CTAG];

Response Format for VFY-IOCH-H110LSL

::[<IO Manager/Slot Number>]-[<LSL H110 Channel/Channel Number>]:<CHANNEL_NUMBER=int>,<CLLI=string>,<CTBUS_TS_RX=CTBusTS>,<CTBUS_TS_TX=CTBusTS>,<BAUD_RATE=Baud>,<L3U=ChannelStatus>,<LPBK_MODE=EnableType>,<SUPP_DBG=string>,<MTP3_API=LoggingState>,<LSSU=LoggingState>,<FISU_MSU=LoggingState>;

AID Description

Channel Number - Position 1
Type: int
Description: The number of the Signaling Channel being mapped.pagebreak

Attribute Details

Noprint

Click to read more...
Toggle Cloak

Cloak

CHANNEL_NUMBER - Channel Number
Type: int
Description: The number of the Signaling Channel being mapped.

CLLI - CLLI
Permission: Writeable
Type: string
Description: Common Language Location Identifier string for this channel.

CTBUS_TS_RX - CTBus Time Slot Rx
Permission: Writeable
Type: CTBusTS={NOT_CONFIGURED, 1 to 4096}
Description: Receive Timeslot on the CTBus (1-4096).

CTBUS_TS_TX - CTBus Time Slot Tx
Permission: Writeable
Type: CTBusTS={NOT_CONFIGURED, 1 to 4096}
Description: Transmit Timeslot on the CTBus (1-4096).

BAUD_RATE - Baud Rate
Baud={DS0_64K,DS0A_56K,BAUD_48K,BAUD_48K_REV,BAUD_TTC_48K}
Description: Baud rate for the timeslot. 64K uses all 8 bits. 56K uses 7 of 8 bits and discards the LSB. 48K uses 6 of 8 bits and discards the 2 LSBs. 48K_REV uses 6 of 8 bits and discards the two MSBs. TTC_48K uses 6 of 8 bits and discards the LSB and MSB.

L3U - L3 Use
Permission: Read-only
Type: ChannelStatus={IN_USE,AVAILABLE, 1 to 1024}
Description: State of channel availability for MTP3 use (assigned number or AVAILABLE).

LPBK_MODE - Loopback Mode
Permission: Writeable
Type: EnableType={DISABLED,ENABLED}
Description: Redirects incoming data on Tx timeslot back to Rx timeslot (Remote end L2 alignment may be achieved). ENABLED or DISABLED

SUPP_DBG - Support Debug
Permission: Read-only
Type: string
Description: Information for debug support.

MTP3_API - MTP3 API
Permission: Read-only
Type: LoggingState={NOT_LOGGED,LOGGED,OVERRIDDEN}
Description: Log MTP3 API related information. Set this value at MTP3.
Values: LOGGED, NOT_LOGGED. Value OVERRIDDEN indicates the debug FEATURE is NOT_LOGGED.

LSSU - LSSU
Permission: Read-only
Type: LoggingState={NOT_LOGGED,LOGGED,OVERRIDDEN}
Description: Log LSSU receipt and state changes. Set this value at MTP3.
Values: LOGGED, NOT_LOGGED. Value OVERRIDDEN indicates the debug FEATURE is NOT_LOGGED.

FISU_MSU - FISU and MSU
Permission: Read-only
Type: LoggingState={NOT_LOGGED,LOGGED,OVERRIDDEN}
Description: Log Sequence Numbers information. Set this value at MTP3.
Values: LOGGED, NOT_LOGGED. Value OVERRIDDEN indicates the debug FEATURE is NOT_LOGGED.

...

MTP2 Link

Div

style	padding-left:3%;

VFY-IOCH-MTP2LINK

VFY-IOCH-MTP2LINK::[<IO Manager/Slot Number>]:[CTAG];

Response Format:

::[<IO Manager/Slot Number>]:;

Attribute Details

None

...

Div

style	padding-left:3%;

DLT-IOCH-HSLATM

DLT-IOCH-HSLATM::[<IO Manager/Slot Number>]-[<HSL ATM Channel/Channel Number>]:[CTAG];

ADD-IOCH-HSLATM

ADD-IOCH-HSLATM::[<IO Manager/Slot Number>]-[<HSL ATM Channel/Channel Number>]:[CTAG]:::::[PORT=<PortNumber>];

CHG-IOCH-HSLATM

CHG-IOCH-HSLATM::[<IO Manager/Slot Number>]-[<HSL ATM Channel/Channel Number>]:[CTAG]:::::[CLLI=<string>],[VPI=<int>],[VCI=<int>],[SCRAMBLING=<EnableType>],[HEC_POLY=<EnableType>],[HEC_VERIF=<CheckLevel>],[QOS=<BitRate>],[T1=<int>],[T2=<int>],[T3=<int>],[ALIGNMENT=<Align>],[N1=<int>],[CNGS_LVL1_ONST=<int>],[CNGS_LVL2_ONST=<int>],[CNGS_LVL3_ONST=<int>],[CNGS_LVL1_ABT=<int>],[CNGS_LVL2_ABT=<int>],[CNGS_LVL3_ABT=<int>],[LOGL1=<LoggingState>],[LOGL2=<LoggingState>],[LOGL3=<LoggingState>],[LOGL4=<LoggingState>];

SET-IOCH-HSLATM

SET-IOCH-HSLATM::[<IO Manager/Slot Number>]-[<HSL ATM Channel/Channel Number>]:[CTAG]:::[ACT/DEACT];

VFY-IOCH-HSLATM

VFY-IOCH-HSLATM::[<IO Manager/Slot Number>]-[<HSL ATM Channel/Channel Number>]:[CTAG];

Response Format for VFY-IOCH-HSLATM

::[<IO Manager/Slot Number>]-[<HSL ATM Channel/Channel Number>]:<CHANNEL_NUMBER=int>,<CLLI=string>,<PORT=PortNumber>,<VPI=int>,<VCI=int>,<SCRAMBLING=EnableType>,<HEC_POLY=EnableType>,<HEC_VERIF=CheckLevel>,<QOS=BitRate>,<STATE=FuncStatus>,<L3U=ChannelStatus>,<DBG=string>,<T1=int>,<T2=int>,<T3=int>,<ALIGNMENT=Align>,<N1=int>,<CNGS_LVL1_ONST=int>,<CNGS_LVL2_ONST=int>,<CNGS_LVL3_ONST=int>,<CNGS_LVL1_ABT=int>,<CNGS_LVL2_ABT=int>,<CNGS_LVL3_ABT=int>,<LOGL1=LoggingState>,<LOGL2=LoggingState>,<LOGL3=LoggingState>,<LOGL4=LoggingState>;pagebreak

AID Description

Channel Number - Position 1
Type: int
Description: Number that is used in communication with Level 3

Attribute Details

Noprint

Click to read more...
Toggle Cloak

Cloak

CHANNEL_NUMBER - Channel Number
Type: int
Description: Number that is used in communication with Level 3

CLLI - CLLI
Permission: Writeable
Type: string
Description: Common Language Location Identifier string for this channel.

PORT - Port
Permission: Createable
Type: PortNumber={PORT_0,PORT_1,PORT_2,PORT_3,PORT_4,PORT_5,PORT_6,PORT_7,MONITOR_PORT,NOT_CONFIGURED,PORT_8}
Description: The number of the I/O port with the physical connection to the link

VPI - VPI
Permission: Writeable
Type: int
Description: Virtual path identifier (0-255)

VCI - VCI
Permission: Writeable
Type: int
Description: Virtual channel identifier (0-65535)

SCRAMBLING - Scrambling
Permission: Writeable
Type: EnableType={DISABLED,ENABLED}
Description: Scrambling of the payload part of the ATM cell

HEC_POLY - HEC Polynomial
Permission: Writeable
Type: EnableType={DISABLED,ENABLED}
Description: Also called coset, HEC ATM polynomial option used in HEC calculation

HEC_VERIF - HEC Verification
Permission: Writeable
Type: CheckLevel={FILTER,CORRECT}
Description: Filter or correct cells received with invalid HEC

QOS - Quality of Service
Permission: Writeable
Type: BitRate={CBR,rt-VBR,nrt-VBR,UBR}
Description: Constant, rt-aVerage, nrt-aVerage, Unspecified

STATE - Channel State
Permission: Read-only
Type: FuncStatus={ACTIVATED,DEACTIVATED,FAILED}
Description: Link Manager state

L3U - L3 Use
Permission: Read-only
Type: ChannelStatus={IN_USE,AVAILABLE, 1 to 1024}
Description: Either the assigned Server Process number or AVAILABLE if not registered.

DBG - Debug
Permission: Read-only
Type: string
Description: Information for support purposes.

T1 - T1
Permission: Writeable
Type: int
Description: T1 Timer. Time in ms between link release and re-establishment during alignment

T2 - T2
Permission: Writeable
Type: int
Description: T2 Timer. Time in ms that SSCF will attempt link alignment

T3 - T3
Permission: Writeable
Type: int
Description: T3 Timer. Time in ms between proving PDUs

ALIGNMENT - Alignment
Permission: Writeable
Type: Align={NORMAL,EMERGENCY}
Description: Alignment type

N1 - N1
Permission: Writeable
Type: int
Description: Number of PDUs sent during normal proving

CNGS_LVL1_ONST - Congestion Level 1 Onset
Permission: Writeable
Type: int
Description: Onset of level 1 congestion for ANSI and Onset of congestion for ITU. In ITU any congestion level will trigger notice to L3.

CNGS_LVL2_ONST - Congestion Level 2 Onset
Permission: Writeable
Type: int
Description: Onset of level 2 congestion for ANSI. In ITU any congestion level will trigger notice to L3.

CNGS_LVL3_ONST - Congestion Level 3 Onset
Permission: Writeable
Type: int
Description: Onset of level 3 congestion for ANSI. In ITU any congestion level will trigger notice to L3.

CNGS_LVL1_ABT - Congestion Level 1 Abate
Permission: Writeable
Type: int
Description: Level 1 congestion abatement for ANSI and congestion abatement for ITU. In ITU the lowest abatement the clear notice trigger for L3.

CNGS_LVL2_ABT - Congestion Level 2 Abate
Permission: Writeable
Type: int
Description: Level 2 congestion abatement for ANSI. In ITU the lowest abatement the clear notice trigger for L3.

CNGS_LVL3_ABT - Congestion Level 3 Abate
Permission: Writeable
Type: int
Description: Level 3 congestion abatement for ANSI. In ITU the lowest abatement the clear notice trigger for L3.

LOGL1 - Management
Permission: Writeable
Type: LoggingState={NOT_LOGGED,LOGGED,OVERRIDDEN}
Description: Minimal logging - mostly exchanges with level 3.

LOGL2 - SSCF Messages
Permission: Writeable
Type: LoggingState={NOT_LOGGED,LOGGED,OVERRIDDEN}
Description: High level state transitions. Few logs during normal operations.

LOGL3 - SSCOP Messages
Permission: Writeable
Type: LoggingState={NOT_LOGGED,LOGGED,OVERRIDDEN}
Description: Verbose logging of protocol events. Not for production environment.

LOGL4 - PDUs
Permission: Writeable
Type: LoggingState={NOT_LOGGED,LOGGED,OVERRIDDEN}
Description: Very verbose logging or each message. Not for production environment.

...

Div

style	padding-left:3%;

VFY-IOCH-HSLATMDBG

VFY-IOCH-HSLATMDBG::[<IO Manager/Slot Number>]-[<HSL ATM Channel/Channel Number>]:[CTAG];

Response Format:

::[<IO Manager/Slot Number>]-[<HSL ATM Channel/Channel Number>]:<SSCOP_STATE=string>,<SSCF_STATE=string>;

Attribute Details

SSCOP_STATE - SSCOP State
Permissions: Read-only
Type: string
Description: .

SSCF_STATE - SSCF State
Permissions: Read-only
Type: string
Description: .

Pagebreak

Port Clocking

Div

style	padding-left:3%;

CHG-IO-PORTCLOCK

CHG-IO-PORTCLOCK::[<IO Manager/Slot Number>]:[CTAG]:::::[PRMCLKSRC=<ClockSource>],[SECCLKSRC=<ClockSource>],[CLKMODE=<ClockMode>];

VFY-IO-PORTCLOCK

VFY-IO-PORTCLOCK::[<IO Manager/Slot Number>]:[CTAG];

Response Format for VFY-IO-PORTCLOCK

::[<IO Manager/Slot Number>]:<INDVPRTCLK=EnableType>,<PRMCLKSRC=ClockSource>,<SECCLKSRC=ClockSource>,<CURCLKSRC=ClockSource>,<CLKMODE=ClockMode>;

Attribute Details

Noprint

Click to read more...
Toggle Cloak

Cloak

INDVPRTCLK - Per-Port Clocking
Permission: Read-only
Type: EnableType={DISABLED,ENABLED}
Description: If ENABLED all ports can be configured to maintain separate clocking sources, otherwise there is a single clocking source for all ports. (hardware dependent)

PRMCLKSRC - Primary Clock Source
Permission: Writeable
Type: ClockSource={NONE,INTERNAL,PORT_0,PORT_1,PORT_2,PORT_3,PORT_4,PORT_5,PORT_6,PORT_7,MONITOR_PORT,CLOCK_A,CLOCK_B,PORT_8,TELCO_A,TELCO_B}
Description: Primary Clock source

SECCLKSRC - Secondary Clock Source
Permission: Writeable
Type: ClockSource={NONE,INTERNAL,PORT_0,PORT_1,PORT_2,PORT_3,PORT_4,PORT_5,PORT_6,PORT_7,MONITOR_PORT,CLOCK_A,CLOCK_B,PORT_8,TELCO_A,TELCO_B}
Description: Secondary Clock source

CURCLKSRC - Current Clock Source
Permission: Read-only
Type: ClockSource={NONE,INTERNAL,PORT_0,PORT_1,PORT_2,PORT_3,PORT_4,PORT_5,PORT_6,PORT_7,MONITOR_PORT,CLOCK_A,CLOCK_B,PORT_8,TELCO_A,TELCO_B}
Description: Current clock source

CLKMODE - Clock Mode
Permission: Writeable
Type: ClockMode={STAND_ALONE,SLAVE,MASTER_A,MASTER_B,MASTER_TELCO_A,MASTER_TELCO_B}
Description: Clock mode for H110 enabled devices

Pagebreak

Anchor
Release Notes Port Configuration
Release Notes Port Configuration
Port Configuration

...

Div

style	padding-left:3%;

SET-IO-VPT

SET-IO-VPT::[<IO Manager/Slot Number>]:[CTAG]:::[CLR_MAP];pagebreak

VFY-IO-VPT

VFY-IO-VPT::[<IO Manager/Slot Number>]:[CTAG];

Response Format for VFY-IO-VPT

::[<IO Manager/Slot Number>]:;

Attribute Details

None.

...

Div

style	padding-left:3%;

DLT-IO-HPT

DLT-IO-HPT::[<IO Manager/Slot Number>]-[<H110 Pass Through/InstanceID>]:[CTAG];

ADD-IO-HPT

ADD-IO-HPT::[<IO Manager/Slot Number>]-[<H110 Pass Through/InstanceID>]:[CTAG];

CHG-IO-HPT

CHG-IO-HPT::[<IO Manager/Slot Number>]-[<H110 Pass Through/InstanceID>]:[CTAG]:::::[PORT_A=<PortNumber>],[TIMESLOT_A=<Timeslot>],[CTBUS_TS_RX=<CTBusTS>],[CTBUS_TS_TX=<CTBusTS>];

VFY-IO-HPT

VFY-IO-HPT::[<IO Manager/Slot Number>]-[<H110 Pass Through/InstanceID>]:[CTAG]::::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];

Response Format

::[<IO Manager/Slot Number>]-[<H110 Pass Through/InstanceID>]:<PORT_A=PortNumber>,<TIMESLOT_A=Timeslot>,<CTBUS_TS_RX=CTBusTS>,<CTBUS_TS_TX=CTBusTS>;

AID Description

InstanceID - Position 1
Type: int
Description: Object instance number

Pagebreak

Attribute Details

Noprint

Click to read more...
Toggle Cloak

Cloak

PORT_A - Port A
Permission: Writeable
Type: PortNumber={PORT_0,PORT_1,PORT_2,PORT_3,PORT_4,PORT_5,PORT_6,PORT_7,MONITOR_PORT,NOT_CONFIGURED,PORT_8}
Description: Port A receive/transmit

TIMESLOT_A - Time Slot A
Permission: Writeable
Type: Timeslot={NOT_CONFIGURED, 1 to 31}
Description: Time slot on port A

CTBUS_TS_RX - CTBus Time Slot Rx
Permission: Writeable
Type: CTBusTS={NOT_CONFIGURED, 1 to 4096}
Description: Receive timeslot on the CTBus (1-4096)

CTBUS_TS_TX - CTBus Time Slot Tx
Permission: Writeable
Type: CTBusTS={NOT_CONFIGURED, 1 to 4096}
Description: Transmit timeslot on the CTBus (1-4096)

...

Div

style	padding-left:3%;

VFY-IO-TIPCSRV

VFY-IO-TIPCSRV::[<IO Manager/Slot Number>]-[<TIPC Server/Service Instance>]:[CTAG];

Response Format

::[<IO Manager/Slot Number>]-[<TIPC Server/Service Instance>]:<PROTO=ProtoServed>,<TIPC_CLASS=int>,<SRVC_NUM=int>,<NUM_ASP=int>;

AID Description

Service Instance - Position 1
Type: int
Description: TIPC service instance number

Attribute Details

Noprint

Click to read more...
Toggle Cloak

Cloak

PROTO - Protocol
Permissions: Read-only
Type: ProtoServed={TDM,ATM,ALL}
Description: Which protocols the connections to this server will support

TIPC_CLASS - Service Type
Permissions: Read-only
Type: int
Description: TIPC service type number

SRVC_NUM - Service Instance
Permissions: Read-only
Type: int
Description: TIPC service instance number

NUM_ASP - Number of ASP
Permissions: Read-only
Type: int(Range: [0..2.14748e+09])
Description: Number of associations spawned by this server

Pagebreak

TIPC Server Process

Div

style	padding-left:3%;

VFY-IO-TIPCSRVPROC

VFY-IO-TIPCSRVPROC::[<IO Manager/Slot Number>]-[<TIPC Server/Service Instance>]-[<TIPC Server Process/ASP ID>]:[CTAG];

Response Format

::[<IO Manager/Slot Number>]-[<TIPC Server/Service Instance>]-[<TIPC Server Process/ASP ID>]:<ASP_ID=int>;

AID DESCRIPTION

ASP ID - Position 1
Type: int
Description: Unique number for this connection

Attribute Details

ASP_ID - ASP ID
Permissions: Read-only
Type: int
Description: Unique number for this connection

...

Div

style	padding-left:3%;

VFY-IO-TCPCX

VFY-IO-TCPCX::[<IO Manager/Slot Number>]-[<TCP Connection/ASP ID>]:[CTAG];

Response Format

::[<IO Manager/Slot Number>]-[<TCP Connection/ASP ID>]:<TCP_CX=int>,<REMOTE_IP1=string>;

AID DESCRIPTION

ASP ID - Position 1
Type: int
Description: Unique number for this connection

Attribute Details

TCP_CX - ASP ID
Permissions: Read-only
Type: int
Description: Unique number for this connection

REMOTE_IP1 - Remote IP
Permissions: Read-only
Type: string
Description: Remote IP of this connection

...

Space shortcuts

Page tree

Page History

Versions Compared

Old Version 1

New Version Current

Key

IO Manager Command Groupings

IO Manager

DLT-IOCH-H110LSL

ADD-IOCH-H110LSL

CHG-IOCH-H110LSL

VFY-IOCH-H110LSL

Response Format for VFY-IOCH-H110LSL

AID Description

Attribute Details

MTP2 Link

VFY-IOCH-MTP2LINK

Response Format:

Attribute Details

DLT-IOCH-HSLATM

ADD-IOCH-HSLATM

CHG-IOCH-HSLATM

SET-IOCH-HSLATM

VFY-IOCH-HSLATM

Response Format for VFY-IOCH-HSLATM

AID Description

Attribute Details

VFY-IOCH-HSLATMDBG

Response Format:

Attribute Details

Port Clocking

CHG-IO-PORTCLOCK

VFY-IO-PORTCLOCK

Response Format for VFY-IO-PORTCLOCK

Attribute Details

AnchorRelease Notes Port ConfigurationRelease Notes Port ConfigurationPort Configuration

SET-IO-VPT

VFY-IO-VPT

Response Format for VFY-IO-VPT

Attribute Details

DLT-IO-HPT

ADD-IO-HPT

CHG-IO-HPT

VFY-IO-HPT

Response Format

AID Description

Attribute Details

VFY-IO-TIPCSRV

Response Format

AID Description

Attribute Details

TIPC Server Process

VFY-IO-TIPCSRVPROC

Response Format

AID DESCRIPTION

Attribute Details

VFY-IO-TCPCX

Response Format

AID DESCRIPTION

Attribute Details

Anchor
Release Notes Port Configuration
Release Notes Port Configuration
Port Configuration