Page History
...
This operation is used to configure the IP settings for the Application Solution Module (ASM). The SBC supports two ASM network adapters. Each adapter can be configured with IP settings, such as an IP address and DNS address (Network Adapter 2 is optional). This is an essential requirement in order to ensure that the Managing the SBC Communication Service becomes operational.
Note |
---|
Before configuring the IP settings for the ASM, ensure you have prepared the SBA for deployment. See Preparing for SBA Deployment - First Steps. |
...
IPv4/IPv6 Addressing Supported per Network Adapter
Adapter | IPv4 alone | IPv6 alone | IPv4 and IPv6 (both supported) | SBC 1000/2000 Ethernet Port Designation |
---|---|---|---|---|
Network Adapter 1 | SBC 1000/2000. Ethernet Port 1 used by the ASM requires an IPv4 address; configuring an additional IPv6 address is optional. | |||
Network Adapter 2 | SBC 1000. Ethernet Port 2 or 3 does not require IPv4; this port can be configured with IPv4 and/or IPv6. SBC 2000. Ethernet Port 2, 3, or 4 does not require IPv4; this port can be configured with IPv4 and/or IPv6. |
Info |
---|
The third Ethernet port on the SBC 1000 is available only if running SBC 1000 v2 hardware. For hardware details, see Ribbon SBC 1000 Hardware Specifications. |
...
- In the WebUI, click the Settings tab.
In the left navigation pane, go to Application Solution Module > ASM Configuration. For field definitions, see ASM Configuration - Field Definitions.
The example below shows DHCP disabled for IPv4 on Network Adapter 1 and enabled for IPv4 on Network Adapter 2.
Network Adapter 1 ASM Configuration - DHCP EnabledFrom DHCPv4 Enabled, select Yes. Depending on the IP Addressing mode selected, IPv4 and/or IPv6 options are displayed. See below:
DHCPv4 Enabled, Configuration Options
Network Adapter 1DHCPv4 Enabled IP Addressing Mode Configuration Options Available Yes IPv4 None Yes IPv4 and IPv6 IPv6 Configuration
Network Adapter 2DHCPv4 Enabled IP Addressing Mode Configuration Options Available Yes IPv6 IPv6 Configuration Yes IPv4 None Yes IPv4 and IPv6 IPv6 Configuration - Update configuration (see Configuring the ASM IP Settings#Network Network Adapter 1 Configuration - Field Definitions and Configuring the ASM IP Settings#Network Network Adapter 2 Configuration - Field Definitions.
- Click Apply.
...