Page History

...

1. In the mounting hardware bag provided with the

   Spacevars
   0 series2

   system, find the rear support brackets (2) and 9-inch extension arms (2).
2. If you are installing the 

   Spacevars
   0 series2

   system into a 30-inch depth rack, attach the extension arms to the support brackets.

3. Attach the support brackets securely to the two rear posts of your equipment rack. Refer to the illustration below for visual details of the assembly:

   Panel
   bgColor #FFFFFF borderStyle none
   Caption 0 Figure 1 Assemble and Install Rear Support Brackets Image Modified

   
   

   
   

...

1. Attach the 2 rack mounting ears securely to the front corners of the 

   Spacevars
   0 series2

   chassis.
2. Attach the 2 pan handle plates securely to the rear corners of the 

   Spacevars
   0 series2

   chassis.
3. Working with a partner, lift the 

   Spacevars
   0 series2

   chassis and slide it into the equipment rack, making sure to seat each pan handle plate into the support brackets mounted on the rear support posts.

4. Attach the 2 rack mounting ears securely to the front mounting posts of the equipment rack. Refer to the illustration below for visual details of the installation (click to enlarge).

   Panel
   bgColor #FFFFFF borderStyle none
   Caption 0 Figure 1 Install in 4-Post Equipment Rack Image Modified

   
   

   
   

...

1. Attach the 2 rack mounting ears securely to the center mounting points on both sides of the 

   Spacevars
   0 series2

   chassis.

2. Attach the 2 rack mounting ears securely to the mounting posts of the equipment rack. Refer to the illustration below for visual details of the installation (click to enlarge).

   Panel
   bgColor #FFFFFF borderStyle none
   Caption 0 Figure 1 Install in 2-Post Equipment Rack Image Modified

   
   

   
   

Installing Interface Cards

...

{multi-excerpt-include:pageTitle=Inserting and Removing Interface Cards|name=insert|nopanel=true}

Installing Ground Wire, Power Cables and Connect Power

...

1. Place the cable management bracket on top of the pan handle plates.

   Note
   If you have installed the Spacevars 0 series2 chassis in a 2-post configuration, you must install the pan handle plates on the rear corners of the chassis.

   
   

   
   

2. Use the provided cable ties to secure the cable management bracket to the pan handle plates. Refer to the illustration below for visual details of the installation (click to enlarge).
   

   Pagebreak

   Panel
   bgColor #FFFFFF borderStyle none
   Caption 0 Figure 1 Install Cable Management Bracket Image Modified

   
   

   
   

Next Steps

You are now ready to complete the initial configuration of the