Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Requirements for configuring the SBC Edge in support of Teams Direct Routing include:

Caption
0Table
1SBC Edge Requirements


RequirementDetails
SBC Behind the NAT*

Public IP address of NAT device and Private IP address of the SBC.

SBC with Public IPPublic IP address of SBC is required.
Network Address Translation (NAT)* ConfigurationRequired for deployment of an SBC behind a NAT.
Public FQDN The Public FQDN must point to the Public IP Address.
Public certificate associated with the Public FQDN

Certificate must be issued by one of the supported certification authorities (CAs). Wildcard certificates are supported.

Static IP Address

Required for deployment of an SBC behind a NAT, the Public IP address on the NAT must be static.

*NAT translates a public IP address to a Private IP address.


Anchor
DomainName
DomainName
Obtain Domain Name

...

Note

Do  not use the *.onmicrosoft.com tenant for the domain name.



Caption
0Table
1Domain Name Examples


Domain NameUse for SBC FQDN?FQDN Names - Examples
SonusMS01.com(tick)

Valid names:

  • aepsite6.SonusMS01.com

hybridvoice.org

(tick)

Valid names:

  • sbc1. hybridvoice.org
  • ussbcs15. hybridvoice.org
  • europe. hybridvoice.org

Non-Valid name:

sbc1.europe.hybridvoice.org (requires registering domain name europe. hybridvoice.org in “Domains” first)




Info

Users may be from any SIP domain registered for the tenant. For example, you can configure user user@SonusMS01.com with the SBC FQDN name sbc1.hybridvoice.org, as long as both names are registered for the tenant.



Caption
0Figure
1Configure Domain Names - Example
 Image Modified



Note
titlePrerequisite - Verify Domain Before Adding PSTN Gateway

Verify the correct domain name is configured for the Tenant. The correct domain name is required for the SBC to pair with Microsoft Teams.

  1. On the Microsoft Teams Tenant side, execute Get-CsTenant.
  2. Review the output.
  3. Verify that the Domain Name configured is listed in the Domains and DomainUrlMap attributes. If the Domain Name is incorrect or missing, the SBC will not pair with Microsoft Teams.

...

The tables below represent ACL (Access Control List) examples that protect the SBC Edge; these attributes are automatically provisioned if the Teams-related Easy Configuration wizards are used (applies to the greenfield deployment scenario only). 


Caption
0Table
1Public Access In - Requirements


Description

Protocol

Action

Src IP Address

Src Port

Dest IP Address

Dest Port

Outbound DNS Reply

TCP

Allow

0.0.0.0/0

53

SBC/32

0-65535

Outbound DNS Reply

UDP

Allow

0.0.0.0/0

53

SBC/32

0-65535

Outbound NTP Reply

UDP

Allow

0.0.0.0/0

123

SBC/32

123

Outbound SIP Reply

TCP

Allow

0.0.0.0/0

5061

SBC/32

1024-65535

Inbound SIP Request

TCP

Allow

0.0.0.0/0

1024-65535

SBC/32

5061*

Inbound Media Helper

UDP

Allow

52.112.0.0/14

49152-53247

SBC/32

16384-17584**

Deny All

Any

Deny

0.0.0.0/0

...


0.0.0.0/0

...




Caption
0Table
1Public Access Out - Requirements


Description

Protocol

Action

Src IP Address

Src Port

Dest IP Address

Dest Port

Outbound DNS Request

TCP

Allow

SBC/32

0-65535

0.0.0.0/0

53

Outbound DNS Request

UDP

Allow

SBC/32

0-65535

0.0.0.0/0

53

Outbound NTP Request

UDP

Allow

SBC/32

0-65535

0.0.0.0/0

123

Outbound SIP Request

TCP

Allow

SBC/32

0-65535

0.0.0.0/0

5061

Inbound SIP Reply

TCP

Allow

SBC/32

5061*

0.0.0.0/0

1024-65535

Outbound Media Helper

UDP

Allow

SBC/32

16384-17584**

52.112.0.0/14

49152-53247

Deny All

Any

Deny

0.0.0.0/0

...


0.0.0.0/0



 

* Define in Tenant configuration

...

The tables below represent ACL (Access Control List) examples that protect the SBC Edge; these ACL attributes are automatically provisioned if the Teams-related Easy Configuration wizards are used (applies to the greenfield deployment scenario only).

Caption
0Table
1Public Access In - Requirements (Media Bypass Scenario)


Description

Protocol

Action

Src IP Address

Src Port

Dest IP Address

Dest Port

Inbound Media Bypass Helper

UDP

Allow

0.0.0.0/0

1024-65535

SBC/32

16384-21186**



Caption
0Table
1Public Access Out - Requirements (Media Bypass Scenario)


Description

Protocol

Action

Src IP Address

Src Port

Dest IP Address

Dest Port

Outbound Media Bypass Helper

UDP

Allow

SBC/32

16384-21186**

0.0.0.0/0

1024-65535


* Define in Tenant configuration

...

** Depends of the Media Port paired configured in SBC