| Add_workflow_for_techpubs |
|---|
| AUTH1 | UserResourceIdentifier{userKey=8a00a0c86ca23f8a016cd6ed6fe90013, userName='null'} |
|---|
| JIRAIDAUTH | TP-462 |
|---|
| REV5 | UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'} |
|---|
| REV6 | UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'} |
|---|
| REV3 | UserResourceIdentifier{userKey=8a00a0c866dc3dee0166ea60b86f0014, userName='null'} |
|---|
| REV1 | UserResourceIdentifier{userKey=8a00a0c866dc3dee0166ea60b86f0014, userName='null'} |
|---|
|
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | EdgeMarc 2900ePoE Front Panel |
|---|
| 3 | EdgeMarc 2900ePoE Front Panel |
|---|
|
 Image Modified
|
...
When lit, the Power LED indicates power is applied to the system. The Status LED changes to indicate the current state of the system.
| Caption |
|---|
| 0 | Table |
|---|
| 1 | EdgeMarc 2900ePoE LEDs |
|---|
| 3 | EdgeMarc 2900ePoE LEDs |
|---|
|
| LED | Indicator | Description |
|---|
| Power | Off | Power is not supplied to the device.
Troubleshoot by verifying that the power adapter is connected to the unit and that power is supplied to the AC wall outlet. |
|
...
|
| Solid
Green | Power is supplied to the unit. | | Status | Off | Power is not supplied to the device, or the bootloader failed to load. |
|
...
|
| Solid
Amber | The device is running a self-test and is initializing. |
|
...
| Flashing
Amber | The device is upgrading its software. |
|
...
|
| Flashing
Green | The device is loading the VoIP Operation System (VOS). |
|
...
...
| Red | The device is in the bootloader.
The kernel will change the LED to solid amber once the kernel starts loading. | Fiber
Link/Access | Solid
Green | Peer link is powered. |
|
...
|
| Flashing
LED | Fiber traffic is active. |
|
| Caption |
|---|
| 0 | Table |
|---|
| 1 | EdgeMarc 2900ePoE Front Panel Components |
|---|
| 3 | EdgeMarc 2900ePoE Front Panel Components |
|---|
|
Physical
Label/Type | Function | Description |
|---|
| Erase button | Erase | Press the Erase button in quick succession to control the following:- One click—No action.
- Two clicks—Resets the CLI and GUI password with no service interruption.
- Three clicks—Restores to factory default settings and reboots the system.
Note: When restored to factory default settings, the current configuration is lost, disconnecting all VoIP devices, Internet connectivity, and network access for computers until the system is reconfigured. | Power/Status
LEDs | System power
and status | Refer to EdgeMarc 2900ePoE LEDs for system and power status details. | Ethernet WAN
Ports 1-2 | WAN | 2x1 10/100/1000 Mbps RJ-45 Ethernet ports for WAN network connectivity (Copper). | | SFP Link LEDs | Status | When lit, the SFP port is active and the copper RJ-45 port is inactive. Refer to EdgeMarc 2900ePoE LEDs. | Optical WAN
SFP Ports 1-2 | WAN | Small Form-Factor Pluggable (SFP) for fiber |
|
...
connectivity.
Either the SFP port (operating at 100/1000 Mbps) or the RJ-45 (operating at 10/100/1000 Mbps) port can be active at a time. | Micro SD Card
Interface | Storage | Allows the to save configurations and otherfiles to an SD High Capacity (SDHC) Version 2.0 card.Maximum storage capacity is 32 GB per SD card, 4 GB per file. The SD card capabilities are configured with the web-based configuration menu and with command-lineinterface (CLI).Refer to EdgeMarc 2900 Series MicroSD Card Features and Specifications. | Management
Console Port | Management | RJ-45 serial craft port for console management.
This port is used for debug or diagnostic purposes only. Primary system configuration is performed from a web browser as described in the EdgeMarc User Guide . | Ethernet LAN
PoE Ports 1-12 | LAN with PoE | 2x6 10/100/1000 Mbps RJ-45 Ethernet ports for LAN network connectivity with PoE. | | PoE LEDs | Status | When lit, the corresponding LAN PoE Port is active. |
|