Excerpt | ||
---|---|---|
| ||
Provides a listing of all application error codes generated when an error is caused on the SBC 1000/2000 System. |
Info |
---|
This page includes a listing of Application Error Codes generated when an application error occurs on the SBC |
Edge system. The error code will be contained within the |
Tip | ||
---|---|---|
| ||
You may bundle the Application Error Codes reference into your client library by downloading the Messages_en.xml file. |
Code | Definition |
---|---|
0 | Successfully connected to the service %1% |
1 | Failed to connect to the service %1% |
2 | Failed to retrieve data from service %1% |
3 | Object type not found for %1%. |
4 | Invalid Parent Tree Location %1% |
5 | Object not found for operation %1%. |
6 | Unknown action %1% requested. |
7 | Last Operation Timeout |
8 | Communication lost with another process during configuration validation. |
9 | Rotate Log Operation failed. Please refresh your view. |
10 | Multiple actions requested, actions can only be performed one at a time. |
11 | Internal error: malformed request. Missing information element for mask %1% |
Code | Definition |
---|---|
1000 | The License system may be trying to use an invalid key |
1001 | The license key applies to a different node |
---|
1002 | The license key expiry is past the present date |
---|
1003 | No license is available on the node %1% |
---|---|
1004 | Licensed and installed hardware mismatch %1% |
1005 | The license XML is invalid |
1006 | License start date not yet reached |
1008 | License filename is required |
Code | Definition |
---|---|
2001 | Request for active alarms list failed. %1% |
2002 | Request for alarm miscellaneous details failed. %1% |
2003 | Request for alarm update failed. %1% |
2004 | Treelocation mismatch. %1% |
2005 | Failed to get active alarm table entry %1% |
2006 | Duplicate SNMP Manager address of %1% configured. |
2007 | SNMP managers count cannot be more than 10. %1% |
2008 | Request for Alarm configuration list failed. |
2009 | Failed to get alarm configuration for %1% |
2010 | Failed to get event history list |
2011 | Failed to get event history entry %1% |
2012 | Failed to clear the event history. |
Code | Definition |
---|---|
4001 | Duplicate Remote Log Servers configured for destination %1% with facility %2% |
4002 | Too many Remote Log Servers configured, %1% configured and only %2% allowed. |
4003 | Invalid syslog server IP or FQDN address. |
4004 | Default Level cannot be trace or debug for server %1%, level %2%. |
Code | Definition |
---|---|
6001 | Requested Action Failure because there already is the same action pending a result |
6002 | SBA Failure (%1%) occurred |
6003 | SBA netmask (%1%) is invalid. |
6004 | SBA IP address (%1%) is invalid. |
6005 | The requested event does not exist. |
6006 | Configured SBA IP address (%1%) is not applied as it is in use by another device. |
6007 | Configured SBA IP address (%1%) is not applied as it is in use by the SBC. |
6008 | Configured SBA IP address (%1%) is not applied as it is the current SBA IP address. |
6009 | Configured SBA IP addresses (%1%) are not applied as Windows does not support 2 adapter in the same subnet. |
6010 | PSTN Site (%1%) is being used by Appliance (%2%) |
6011 | Tenant (%1%) is being used by Site (%2%) |
6012 | Maximum (%1%) Tenant Update Time Windows can be created |
Code | Definition |
---|---|
8001 | Configured Action is not supported. |
8002 | Cannot normalize from string field to value field with output as untranslated in normalization table %1% |
8003 | Cannot normalize different value field types with output as untranslated in normalization table %1% |
8004 | Cannot normalize from value field to string field with regex output and no regex input in normalization table %1% |
8005 | Cannot translate from string field to value field with output as untranslated in translation table %1% |
8006 | Cannot translate different value field types with output as untranslated in translation table %1% |
8007 | Cannot translate from value field to string field with regex output and no regex input in translation table %1% |
8008 | Cannot remove normalization table %1% in use by Action Set Entry %2% |
8009 | Cannot remove translation table %1% in use by Call Route Entry %2% |
8010 | Cannot remove Action Configuration %1% in use by Action Set Entry %2% |
8011 | Cannot remove Message Translation %1% in use by Call Route Entry %2% |
8012 | Cannot remove ReRoute %1% in use by Call Route Entry %2% |
8013 | Cannot remove Media Profile %1% in use by Call Route Entry %2% |
8014 | Action set entry %1% references unconfigured normlization table %2% |
8015 | Action set entry %1% references unconfigured success action %2% |
8016 | Action set entry %1% references unconfigured failure action %2% |
8017 | Call route entry %1% references unconfigured translation table %2% |
8018 | Call route entry %1% references unconfigured media list %2% |
8019 | Call route entry %1% references unconfigured cause code reroute %2% |
8020 | Call route entry %1% references unconfigured message translation table %2% |
8021 | Call route entry %1% references unconfigured signaling group %2% |
8022 | Call route entry %1% references no signaling group |
8023 | Call route entry %1% can not be added to unconfigured call route table %2% |
8024 | Translation table entry %1% can not be added to unconfigured translation table %2% |
8025 | Normalization table entry %1% can not be added to unconfigured normalization table %2% |
8026 | Action set entry %1% can not be added to unconfigured action set %2% |
8027 | Cannot remove Route Table %1% in use by Action %2% |
8028 | Cannot remove Signaling Group %1% in use by call route entry %2% |
8029 | Cannot find Callback Table %1% in use by Transformation Table Entry %2% (%3%). |
8030 | Call Route Table %1% in use by Action %2% (%3%) not found. |
8031 | Call route entry %1% references SG %2% that requires DSP for Media Mode. |
8032 | At least one Stream Mode must be set in Call route entry %1%. |
8033 | Direct media mode can not be mixed across Audio/Fax and Video/Application Stream Modes in Call route entry %1%. |
8034 | Invalid time %1% found in Time Of Day entry %2%. |
8035 | Invalid Day selection %1% found in Time Of Day entry %2%. |
Code | Definition |
---|---|
14001 | No data at tree location %1% |
14002 | Invalid tree location %1% |
14003 | Data already exists at location %1% |
14004 | A SET operation is currently in progress. Wait for the other operation to complete, and retry. |
14005 | No filename was specified for import or export operation |
14006 | Internal communication error when validating configuration change |
14007 | Out of range value validation error at tree location %1% |
14008 | Empty string value validation error at tree location %1% |
14009 | Referenced configuration item not found validation error at tree location %1% %3% for element %2% |
14010 | Unique item not unique validation error at tree location %1% |
14012 | Port is in use by another Signaling Group. Delete the SG entry and retry again. |
14013 | Port %1% profile in use by ISDN Signaling Group %2%. Delete the SG entry and retry again. |
14014 | Configuration validation failed with no specified error. |
14015 | Could not create required directory structure. |
14016 | Could not extract the imported configuration. |
14017 | Could not generate node info file. |
14018 | Unsupported file extension for import operation. |
14019 | Wrong platform type found in the uploaded configuration. |
14020 | Password decryption failed, but the import went through. Please reset any configured passwords in the system. |
14021 | SG Protocol and Listen Port must be specified together, if at all. |
14022 | SIP SG %1% selected by Auto Configuration Task is not configured. |
14023 | Partial configuration import requires the source backup to be of the same release and major version as the one running on the SBC. |
14024 | Configuration restore cannot be done with a backup from a newer release than the one running on the SBC. |
14025 | Maximum number of entries allowed for the table %1% is %2%. |
14026 | Statically configured system DNS servers along with interface set for DHCP with DNS not allowed. |
14027 | Table %2% exceeds the maximum number of callback number entries (%1%) |
Code | Definition |
---|---|
9001 | Tree does not contain an item at location %1% |
9002 | Operation timed out while getting runtime data |
9003 | Wildcard tokens not supported at this operation |
9006 | TCA type %1% can not have raise threshold less than or equal to clear threshold. |
Code | Definition |
---|---|
3001 | Authentication failed for User (%1%) with error : dlopen() failure when dynamically loading a service module. Try again and contact the administrator if problem persists. |
3002 | Authentication failed for User (%1%) with error : Symbol not found. Try again and contact the administrator if problem persists. |
3003 | Authentication failed for User (%1%) with error : Error in service module. Try again and contact the administrator if problem persists. |
3004 | Authentication failed for User (%1%) with error : System error. Try again and contact the administrator if problem persists. |
3005 | Authentication failed for User (%1%) with error : Memory buffer error. Try again and contact the administrator if problem persists. |
3006 | Authentication failed for User (%1%) with error : Permission denied. |
3007 | Authentication failed for User (%1%) with error : Authentication failure. |
3008 | Authentication failed for User (%1%) with error : Can not access authentication data due to insufficient credentials. |
3009 | Authentication failed for User (%1%) with error : Underlying authentication service can not retrieve authentication information. Try again and contact the administrator if problem persists. |
3010 | Authentication failed for User (%1%) with error : User not known to the underlying authenticaiton module. |
3011 | Authentication failed for User (%1%) with error : An authentication service has maintained a retry count which has been reached. No further retries should be attempted. |
3012 | Authentication failed for User (%1%) with error : New authentication token required. This is normally returned if the machine security policies require that the password should be changed because the password is NULL or it has aged. |
3013 | Authentication failed for User (%1%) with error : User account has expired. |
3014 | Authentication failed for User (%1%) with error : Can not make/remove an entry for the specified session. |
3015 | Authentication failed for User (%1%) with error : Underlying authentication service can not retrieve user credentials. Try again and contact the administrator if problem persists. |
3016 | Authentication failed for User (%1%) with error : User credentials expired. |
3017 | Authentication failed for User (%1%) with error : Failure setting user credentials. |
3018 | Authentication failed for User (%1%) with error : No module specific data is present. Try again and contact the administrator if problem persists. |
3019 | Authentication failed for User (%1%) with error : Conversation error. Try again and contact the administrator if problem persists. |
3020 | Authentication failed for User (%1%) with error : Bad password format, please try again. Click 'Password Rules' for help. |
3021 | Authentication failed for User (%1%) with error : Authentication information cannot be recovered. Try again and contact the administrator if problem persists. |
3022 | Authentication failed for User (%1%) with error : Authentication token lock busy. Try again and contact the administrator if problem persists. |
3023 | Authentication failed for User (%1%) with error : Authentication token aging disabled. |
3024 | Authentication failed for User (%1%) with error : Preliminary check by password service. Try again and contact the administrator if problem persists. |
3025 | Authentication failed for User (%1%) with error : Ignore underlying account module regardless of whether the control flag is required, optional, or sufficient. |
3026 | Authentication failed for User (%1%) with error : Critical error. Try again and contact the administrator if problem persists. |
3027 | Authentication failed for User (%1%) with error : User's authentication token has expired. |
3028 | Authentication failed for User (%1%) with error : Module is not known. Try again and contact the administrator if problem persists. |
3029 | Authentication failed for User (%1%) with error : Bad item passed to authentication service. Try again and contact the administrator if problem persists. |
3030 | Authentication failed for User (%1%) with error : Conversation function is event driven and data is not available yet. Try again and contact the administrator if problem persists. |
3031 | Authentication failed for User (%1%) with error : please call this function again to complete authentication stack. Before calling again, verify that conversation is completed. |
3032 | Missing Information Element, cannot complete operation. |
3033 | Authentication failed for User (%1%) with error : User is not authorized. |
3034 | Your session is invalid. Please login again. |
3035 | User lookup failed : Failed to access database. |
3036 | User lookup failed : No users found. |
3037 | Session lookup failed : No active sessions found. |
3038 | Failed to modify user (%1%). |
3039 | Failed to modify user (%1%) - couldn't expire user's password. |
3040 | Failed to modify user (%1%) - user is not logged in. |
3041 | Failed to add user (%1%). |
3042 | Failed to delete user (%1%). |
3043 | Session not found. |
3044 | Session found, but the user (%1%) is not logged in. |
3045 | User authentication failed because no valid session ID could be generated. |
3046 | User cannot be created as user ID is out of the acceptable range (1001-60000). |
3047 | Failed to add user (%1%) as it already exists. |
3048 | Failed to add user (%1%) as the UID is not unique |
Code | Definition |
---|---|
5001 | Hosts configuration failed |
5050 | Hosts configuration addition failed |
5051 | Hosts configuration deletion failed |
5052 | Node name configuration failed |
5053 | Node domain name configuration failed |
5056 | Invalid hostname and IP address |
5057 | Invalid IP address |
5058 | Invalid host name |
5059 | Invalid domain name |
5060 | Maximum hosts limit of 50 reached |
5061 | Host name and IP address combination already exists |
Code | Definition |
---|---|
5550 | Domain Name: %1% is not valid |
5551 | IP Address: %1% is not valid |
5552 | Only 20 Split DNS servers can be configured |
5553 | Duplicate row with same IP %1% and Domain %2% found |
5554 | Split DNS configuration cannot have empty Domain name. |
Code | Definition |
---|---|
10001 | Invalid IP address or FQDN for SNMP manager. |
10002 | SNMPv2 community string cannot be empty. |
10003 | SNMPv3 Auth and Priv passwords must be at least 8 characters in length. |
10004 | Invalid SNMPv3 protocol combination. Valid combinations are 'No Auth, no Priv', 'Auth and Priv' or 'Auth and no Priv'. |
10005 | SNMPv3 USM User cannot be empty. |
10006 | Invalid SNMP version, must be 0 (v2) or 1 (v3). |
10007 | Invalid SNMPv2 community type. Only 'read-only' (1) is supported. |
Code | Definition |
---|---|
12001 | Invalid session. |
12002 | Bad Static Route configuration - due to %1% |
12003 | Bad DNS configuration - due to %1% |
12004 | Bad Domain/Host configuration - due to %1% |
12005 | Bad NTP configuration - due to %1% |
12006 | Bad URL configuration - due to %1% |
12007 | Bad Time Zone configuration - due to %1% |
12008 | Bad Date/Time configuration - due to %1% |
12010 | Bad DHCP Server configuration - due to %1% |
12011 | Failed to clear the DHCP leases - due to %1% |
12050 | Bad Interface configuration - %1% |
12051 | Duplicate Interfaces found with name %1% |
---|
12052 | Invalid Interface name %1% for VLAN value %2% |
---|---|
12053 | VLAN value %1% out or range (1-4094) on Interface %2% |
12054 | Maximum number of interfaces (%1%) already configured. |
12055 | Interface is in use by SG %1% and cannot be deleted. |
12060 | Bad ARP configuration - %1% |
12066 | Bad Bridge configuration - %1% |
12070 | Bad DHCP Object configuration - %1% |
12080 | Bad configuration for mirrored port - %1% |
12081 | Bad configuration for analyzer port - %1% |
12082 | Bad port mirror direction configuration - %1% |
12083 | Bad port mirror configuration - %1% |
12076 | Invalid ACL Rule configuration - %1% |
12077 | Invalid ACL List configuration - %1% |
12078 | Precedence value - %1% is not unique, already assigned to Table %2% and Row ID %3% |
---|---|
12079 | Default ACL rule created by the system must not be modified or deleted. It must be present for proper operation of the system. |
12090 | Bad IPsec Connection configuration - due to %1% |
12091 | Failed to execute |
the IPsec restart system command. At least one tunnel must be activated to restart the service. | |
12092 | Request to reset IPsec statistics failed. |
---|---|
12093 | Bad IPsec configuration: %1% |
12094 | Bad IPsec configuration: %1% |
12095 | Bad IPsec configuration: %1% |
12096 | Bad IPsec configuration: %1% |
12097 | Bad IPsec configuration: %1% |
12098 | Bad IPsec configuration: %1% |
12099 | Bad IPsec configuration: %1% |
12100 | Bad IPsec configuration: %1% |
12101 | Bad IPsec configuration: %1% |
12102 | Bad IPsec configuration: %1% |
12103 | Bad IPsec configuration: %1% |
12104 | Bad IPsec configuration: %1% |
12105 | Bad IPsec configuration: %1% |
12106 | Bad Secret Setting: %1% |
12107 | Bad Secret Setting: %1% |
12108 | Bad IPsec configuration: %1% |
12109 | Bad IPsec configuration: %1% |
12110 | VLAN Interface is in use by the following %1%: %2%. Delete the VLAN IP interface binding and retry. |
12111 | VLAN is used as tagged member on the Port %1%. Delete the entry and retry. |
12112 | VLAN is used as default untagged VLAN for the %1%. Delete the entry and retry. |
12114 | %1% external interface name is not set |
12115 | %1% external interface %2% is not available |
12116 | %1% external interface %2% is not IPv4 mode |
12117 | %1% external interface %2% %3% IP address or netmask not valid |
12118 | Port Forward %1% port start value of %2% is outside allowed 2..65535 range |
12119 | Port Forward number of ports value %1% is outside allowed 1..65533 range |
12120 | Port Forward %1% start %2% plus number of ports %3% (%4%) exceeds 65535 |
12121 | Port Forward %1% port %2% is reserved by the system, cannot be used |
12122 | RTP/RTCP Port range not found, check the Media System Configuration |
12123 | Port Forward %1% port %2% is within the RTP/RTCP Port Range of the Media System Configuration |
12124 | Port Forward %1% port range %2%-%3% overlaps the RTP/RTCP Port Range in the Media System Configuration |
12125 | Port Forward %1% port %2% is in use by the SIP SG Listen Port, Primary Key %3% |
12126 | NAT Interface configuration error. %1% |
12127 | NAT Port Forward configuration error. %1% |
12128 | NAT %1% IP Netmask is missing or not valid IPv4 format |
12129 | NAT %1% Private IP Address %2% |
12130 | NAT Port Forward IP Protocol %1% is not expected %2%..%3% value |
12131 | NAT %1% Primary Key %2% is outside expected %3%..%4% range |
12132 | NAT %1% config error, check Primary Keys %2% and %3% for %4% |
12133 | NAT %1% IP address %2% duplicates address of %3%, this is not allowed |
12134 | NAT Interface Private IP address and netmask %1%/%2% is not a valid configuration |
12135 | %1% port %2% is in use by NAT Port Forward entry at Primary key %3%. Using same port is not allowed |
12150 | Host/Gateway already configured for monitoring: %1% |
12151 | Bad Link Monitor Object configuration - %1% |
12160 | MST instance is in use by the following VLAN %1%. Delete the MST instance binding and retry. |
12161 | MST instance ID %1% is in use by row with ID %2% (%3%) and another row with ID %4% (%5%). Duplication of MST instance ID is not allowed |
12162 | MST instance with row ID %1% (%2%) has invalid values for bridge priority and/or port priority |
12163 | MST Instance ID 0 cannot be deleted |
12164 | Description of MST Instance ID 0 cannot be modified |
12200 | Failed to fork child process. Capture will not be performed. |
12201 | Packet Capture Information Element not found. Capture will not be performed. |
12202 | Packet capture already in progress, cannot start a new one. |
12203 | No packet capture in progress, cannot stop. |
12204 | Invalid packet capture options. |
12205 | Not enough storage space, please install external USB. |
Code | Definition |
---|---|
15000 | Request to validate (%1%) certificate was successful |
15001 | Request to validate (%1%) certificate failed due to bad config parameters |
15002 | Not allowed to delete a (%1%) certificate from store |
15003 | Failed to authenticate (%1%) certificate due to bad encoding format, certificate contents or signature mis-match |
15004 | The (%1%) certificate is found to be missing from the holding store path |
15005 | The (%1%) private key is found to be missing from the key store for Server certificate |
15006 | Unable to locate the (%1%) certificate created in certificate store |
15007 | Unable to open the (%1%) file in the certificate store |
15008 | Unable to read the (%1%) file from the certificate store |
15009 | Unable to write to the (%1%) file in the certificate store |
15010 | Unable to append to the (%1%) file in the certificate store |
15011 | Unable to delete (%1%) file from the certificate store |
15012 | Unable to make a copy of (%1%) file the certificate store |
15013 | Memory error encountered when validating the (%1%) certificate |
15014 | Request to import (%1%) certificate failed due to expired dates: %2% |
15015 | Failed to read the (%1%) private key from key store |
15016 | Failed to append the (%1%) private key to the Server certificate in store |
15017 | Failed to import a duplicate common name (%1%) and serial number (%2%) certificate which already exist in store |
15018 | Request to replace an existing common name (%1%) and serial number (%2%) certificate failed. First delete the existing certificate, and retry |
15019 | (%1%) certificate Extended Key Usage must contain the required Server Authentication value |
15020 | Failed to authenticate (%1%) certificate, X509 Verify Error (%2%): (%3%) |
15022 | Failed to %1% certificate and key file as no certificate matches private key |
15023 | Failed to %1% certificate and key file due to internal error from the SSL stack. |
15024 | Failed to %1% certificate and key file due to MAC verify error. Please provide a valid password. |
15025 | Certificate file name cannot be empty or exceed the maximum size limit %1%. |
15026 | Certificate file data content cannot be empty or exceed the maximum size limit %1%. |
15027 | Certificate file import type out of range value validation error. |
15028 | Certificate file type out of range value validation error. |
15029 | Certificate file format out of range value validation error. |
15030 | Certificate file operation out of range value validation error. |
15031 | Certificate P12 file password cannot be empty or exceed the maximum size limit %1%. |
15032 | (%1%) certificate Key Usage purpose restricts use of Non Repudiation service |
15033 | (%1%) certificate Extended Key Usage must contain the required Server Authentication value and Key Usage purpose restricts use of Non Repudiation service |
15034 | Supplement Certificate is being referenced by TLS Profile (%1%) |
---|---|
15035 | Maximum Supplement Certificates limit reached. Only (%1%) Supplement Certificates are allowed. |
15036 | Allowed ID range for the Supplement Certificate object is (%1%) - (%2%) . |
15038 | The certificate common name should be unique across Primary and Supplementary certificates. |
Code | Definition |
---|---|
16001 | Active directory query failed. |
16002 | Active directory query is not supported in this (%1%) mode. |
16003 | Active directory test |
-connection failed. | |
16004 | Information Element missing in the request. |
---|---|
16005 | Unknown tree ID (%1%) scope (%2%) requested, cannot process the request. |
16006 | Request to reset statistics failed. |
16007 | Bad configuration - Domain-controller cannot be empty. |
16008 | Bad configuration - Attribute list cannot be empty. |
16009 | Bad configuration - Search scope cannot be empty. |
16010 | Bad configuration - LDAP Query cannot be empty. |
16011 | Bad configuration - No username specified. |
16012 | Bad configuration - No password specified. If password was specified then disable AD and configure password on all Domain Controllers. Then enable AD. |
16013 | Bad configuration - Update frequency should be 5 mins at the minimum. |
16014 | Bad configuration - Update frequency can be 365 days at the maximum. |
16015 | AD is not enabled. |
16016 | Bad configuration - AD cannot be in an enabled state with no DCs. |
16017 | Bad configuration - When AD is enabled, Secondary Authentication Domain Controller cannot be deleted. |
16018 | Bad configuration - Duplicate entry detected, cannot add this domain controller. To successfully add a new domain controller, make sure that the entry has a unique combination of IP Address/FQDN, Search Scope and LDAP Query. |
16019 | Domain controller ID out of bounds, cannot add new domain controller. |
16020 | Primary and Secondary AD Domain Controllers cannot be the same. |
16021 | Active Directory cache refresh is in progress. Please wait for that to finish before requesting a refresh again. |
16022 | Bad configuration - Cannot assign two |
DCs of the same priority and DC type. | |
16023 | Bad configuration - Only 2 Authentication DC's |
---|
, 5 Call Routing DC's, and/or 1 On Premise DC are allowed. | |
16024 | Bad configuration - Cannot configure first update time when update by time is false. |
---|---|
16025 | Bad configuration - Incorrect time format, specify hh:mm:ss in 24 hour format. |
16026 | Bad configuration - Primary DC row does not exist. |
16027 | Bad configuration - DC Role set to Primary. Primary DC row must be 0. |
16028 | Bad configuration - Primary DC row cannot point to itself. |
16029 | Bad configuration - DC Role set to Backup. Two |
DCs are linked to each other as the primary. | |
16030 | Active Directory On Premise PBX update is in progress. Please wait for that to finish before requesting a refresh again. |
---|---|
16031 | Cannot set AD cache encryption if AD mode is not Updates or Cache only. |
Code | Definition |
---|---|
17000 | Successfully retreived Inventory at location %1% |
17001 | Tree does not contain an Item at location %1% |
17002 | No Inventory Data for location %1% |
17003 | Missing location information |
Code | Definition |
---|---|
18001 | Tone Table %1% Not Found |
18002 | Port Profile %1% Not Found |
18003 | MediaList %1% Not Found |
18004 | Crypto Profile %1% Not Found |
18005 | Voice or Fax Profile %1% Not Found |
18006 | Channel %1% Not Found |
18007 | Incorrect Admin Action %1% on the Channel %2% |
18008 | Reroute profile %1% Not Found |
18009 | Message Translation Table %1% Not Found |
18010 | A Message Translation Profile Not Found in Table %1% |
18011 | SG %1% is Disabled or Not Present |
18012 | Media List %1% In Use |
18013 | Tone Profile %1% In Use |
18014 | Port Profile %1% In Use by a SG. Delete the SG entry and retry again. |
18015 | Crypto profile %1% In Use |
18016 | Voice/Fax Profile %1% In Use |
18017 | Call Route Table is not set for SG %1% |
18018 | Call Route Table %1% is in use by a SG |
18019 | ActionSet Table %1% is in use by a SG |
18020 | Could not add %1% channels. Channel limit |
%2% exceeded | |
18021 | Channel %1% operation failed |
---|---|
18022 | Channel %1% operation timeout |
18023 | SIP Signalling Group Index %1% Out of range |
18024 | ISDN Signalling Group Index %1% Out of range |
18025 | Voice Codec Profile Index %1% Out of range |
18026 | FAX Codec Profile Index %1% Out of range |
18027 | Cause code reroute table %1% is empty. |
18028 | Voice Codec Media Type %1% Out of range |
18029 | Supplementary profile %1% Not Found |
18030 | CAS channel(s) is(are) in busy list |
18031 | Invalid fractional channel in use for port type %1% in ISDN SG %2% |
18032 | Mutiple Codecs %2% with the same payload type %1% found In MediaList profile |
18033 | Bad Media System Configuration: %1% |
18034 | Channel: %1% not currently allocated for calls |
18035 | Fax media profile should not be the first profile in the Media Profile List. |
18036 | Fax media profile should not be the only profile in the Media Profile List. |
Code | Definition |
---|---|
19001 | (%1%) Failed as framing type provided is not valid for the physical type provided. |
19002 | (%1%) Failed as coding type provided is not valid for the physical type provided. |
19003 | (%1%) Failed as coding type and framing type provided are not valid for the physical type provided. |
19004 | (%1%)Ports in the configuration that have corresponding ports on the hardware can't be deleted |
19005 | (%1%) Port configuration table does not exist |
19006 | (%1%) Failed to set clock as primary and secondary DS1 Layer 1 are down |
19007 | (%1%) Failed to set clock as primary DS1 Layer 1 is down |
19008 | (%1%) Failed to set clock as secondary DS1 Layer 1 is down |
19009 | (%1%) Failed to set clock as DS1 Port is disabled |
19010 | (%1%) Ports on the hardware does not support the relay capability |
19011 | (%1%) Cannot enable port in passthru mode |
Code | Definition |
---|---|
20000 | Internal server error - %1%. Please refresh the view and try the operation again. |
20001 | No default handler found for the operation. |
20002 | Delete on '%1%' should be performed as an action. |
20003 | Ethernet ports on the main board can't be deleted. |
20004 | The management ethernet port cannot be disabled. |
20005 | More than one partition cannot be set active at a time. |
20006 | Object does not exist. |
20007 | The eth0 (management) logical interface cannot be disabled. |
20008 | The currently logged in user cannot be deleted. |
20009 | Unable to open login message file for writing. |
20010 | Microsoft UC Setup Task failed. Please check the following in the settings tree: %1% |
20011 | Partition cannot be set active when the Base Software Version is 'Unknown' |
20012 | Object ID %1% of type %2% does not exist. Please refresh your view. |
20013 | Object ID %1% of type %2% already exists. Please refresh your view. |
20014 | A mediation server is already configured as a SIP Signaling Group federated server |
20015 | A mediation server or border element server is already configured as a SIP Signaling Group federated server |
20016 | The communications server pool is already configured as a SIP Signaling Group federated server |
20017 | Either the communications server pool or a border element server is already configured as a SIP Signaling Group federated server |
20018 | The Modify Application IP Task failed for the following reason(s): %1% |
20019 | The DS1 port type couldn't be set for the following ports: %1% |
20020 | The Import Authorization Table task failed because the file upload failed |
20021 | The Import Authorization Table task failed because the file couldn't be parsed. Please verify that this is a CSV file with three columns, Address of Record, Username, and Password |
20022 | The Import Authorization Table task failed because the new authorization table couldn't be created. |
20023 | The Import Authorization Table task failed because the existing authorization table entries couldn't be removed. |
20024 | The Import Authorization Table task failed because the updated authorization table entries couldn't be added |
20025 | The Import Authorization Table task failed because one or more rows don't have three columns. |
20026 | The Import Authorization Table task failed because one or more rows have data that's too large. |
20027 | Failed to perform action %1%. |
20028 | Failed to retrieve status for action %1%. |
20029 | Internal error serving REST request: failed to convert object reference into href. |
20030 | Internal error serving REST request: unknown error. |
20031 | ID is out of expected range |
20032 | REST session is not authenticated. |
20033 | REST resource has null type. |
20034 | REST request has unsupported method for the resource. |
20035 | REST request contains invalid filter for the resource. |
20036 | REST request contains invalid resource ID or resource ID is not present. |
20038 | Validation Error - Out of range value for resource %1% ID %2% |
20039 | Validation Error - Empty string value for resource %1% ID %2% |
20040 | Validation Error - Resource %1% ID %2% (%4%) could not find configuration item it is using in element %3% |
20041 | Validation Error - Unique item not unique for resource %1% ID %2% |
20042 | Failed to generate CSR: Error while generating SAN Field |
20043 | Failed to generate CSR: Unable to generate private key or CSR |
20044 | Failed to generate CSR: Unable to export private key to a file |
20045 | Incomplete parameters in request |
20046 | Invalid action %1% provided in the request. |
20047 | Action setactive cannot be performed on the boot partition. |
20048 | Unable to calibrate FXO Port %1%: %2% |
20049 | RemotePortValues and LocalPortValues must be empty |
20050 | Validation Error - %3% is in use by resource %1% ID %2% (%4%) |
20051 | SBA Failure Error - %1% |
20052 | Internal Server Error - SBA responded without an export filename |
20053 | An action is currently being performed on the SBA. |
20054 | Incorrect order of action %1% in setting up the SBA. Ensure that the previous action is performed. |
20055 | Initial Setup Failed. Error: %1% |
20056 | REST: importconfig action requires a MaskedItems attribute unless ConfigMaskUsage is 0 |
20057 | Lookup failed for object type %1%, ID %2% |
20058 | The Account Status for the currently logged in user cannot be changed. |
20059 | The Modify Default VLAN Application Task failed for the following reason(s): %1% |
20060 | Password recovery maintenance user not allowed to delete, enable or disable other users. |
20061 | Cannot configure |
%1% codec, |
required license not enabled. | |
20062 | The Payload Type value conflicts with some of the payload types in the media list. |
---|---|
20063 | Error occurred while deleting file - %1% |
20064 | Cannot have more than 48 channels or phone numbers in the list. |
20065 | Provisioning Setup Task failed. Error: %1% |
20066 | Failed to write CCE INI configuration file %1% |
20067 | Unable to parse CCE Configuration INI text, cannot save as a CCE Configuration file |
20068 | Cannot revert to the current running CCE configuration, no such CCE configuration file exists. |
20069 | Unable to write CCE Configuration INI file. Reason: %1% |
20070 | Secondary Gateway configuration error: IP address not provided, and the SBC cannot resolve the FQDN %1% |
20071 | Failover redundancy cannot be selected when tagged VLANs are configured. |
20072 | Failover redundancy cannot be selected unless primary logical interface has an IP address. |
20073 | Redundancy cannot be configured if secondary I/F has Static or Dynamic IP address. |
20074 | Redundant Ethernet port already configured for redundancy. |
20075 | Redundancy must be set to none before changing redundant port. |
20076 | Unable to find redundant Ethernet port. |
20077 | Redundancy cannot be configured if primary I/F has DHCP IP address. |
20078 | At least one IP address must be assigned for Primary Interface in Redundant Pair. |
20079 | REST failure: %1%. |
20080 | Default Untagged VLAN must be set to '%1%' VLAN before setting Redundancy. |
20081 | DHCP cannot be configured for interface in a redundant Ethernet pair. |
20082 | Primary Logical Interface cannot be deleted. |
20083 | SWe Lite must not include 'LicenseKey'. |
20084 | Forbidden file Request |
20085 | File does not exist |
20086 | Invalid type of data for %1% of ID %2% |
Code | Definition |
---|---|
21001 | ISDN Signaling Groups %1% and %2% are both using the same port %3%. |
21002 | ISDN SG %1% of type %2% not allowed on %3% cards. |
21003 | BRI ISDN Signaling Group %1% set to Network side using port %2% which is not set to terminated. Termination must be enabled for Network side. |
21004 | BRI ISDN Signaling Group %1% using port %2% is not set to User side and is being used for system timing. Side must be set to User to use as a system timing reference. |
21005 | Port %1% in use by ISDN Signaling Group %2% not found. |
Code | Definition |
---|---|
22001 | Missing Information Element (IE). |
22002 | Invalid node specified for the action. |
22003 | Unable to locate the specified process. |
22004 | General execution error occurred. |
22005 | Busy executing previous operation. |
22006 | Unknown action requested. |
22007 | Wrong or missing hw_id in restore file. |
22008 | Wrong platform type in configuration backup. |
22009 | Code version not allowed for hardware configuration, minimum required is %1%. |
Code | Definition |
---|---|
23001 | Selected RADIUS operating mode is not supported. |
23002 | Missing Information Element (IE). |
23003 | Server IP/FQDN must be specified to successfully add RADIUS server. |
23004 | Illegal port selected for RADIUS service. |
23005 | Primary RADIUS authentication server must be selected. |
23006 | Duplicate RADIUS server entry detected. |
23007 | Server shared-secret must be specified to successfully add RADIUS server. |
23008 | Primary authentication server cannot be deleted from the list. |
23009 | Secondary authentication server cannot be deleted from the list. |
23010 | Cannot display counter information as the requested RADIUS server ID is incorrect. |
23011 | RADIUS user login failed. |
23012 | RADIUS server ID out of bounds, cannot add new RADIUS server. |
23013 | Primary and Secondary Radius servers can not be the same. |
23014 | RADIUS Accounting server must be selected. |
23015 | Accounting Server 1 cannot be deleted from the list. |
23016 | Accounting Server 2 cannot be deleted from the list. |
23017 | Primary Radius server with valid port must be selected. |
23018 | Secondary Radius with valid port must be selected. |
23019 | Accounting server1 with valid port must be selected. |
23020 | Accounting server2 with valid port must be selected. |
23021 | Accounting server1 and Accounting server2 Radius servers can not be the same. |
23022 | Authentication and Accounting ports can not be the same. |
Code | Definition |
---|---|
24001 | Another music file upload is already in progress. |
24002 |
Failed to create a thread to update music file. Insufficient resources, System reboot is required. | |
24003 | Failed to stop an existing MOH channel. System reboot is required. |
---|---|
24004 | Failed to acquire an active MOH channel on DSP. System reboot is required. |
24005 | Music file pre-processing failed due to an internal error. System reboot required. |
24006 | Music file name cannot be empty and should not exceed 128 chars |
. | |
24007 | Music file size is out of the supported range. File size cannot exceed 1MB. |
---|---|
24008 | Unable to locate the selected music file. |
24009 |
Music file corrupted (or) System failed to allocate memory for music file conversion. If the file is not corrupt system reboot is required. | |
24010 | The selected WAV file contains an unsupported audio format. WAV files must be 8kHz sample rate mono audio, with aLaw, uLaw, or linear PCM encoding. |
---|---|
24011 | The selected music file appears to contain an unsupported audio format. Supported file types include .wav, .pcm, .pcma, .pcmu, and .g726. |
24012 | Change MOH source failed. Need to wait for MOH file upload finished. |
24013 | Unable to upload the MOH file while DSP recovery is on-going. Need to wait for DSP recovery completed. |
24014 | Unable to delete MOH file. |
24015 | Change Media RTP Port settings failed. Need to wait for system to be idle with no active calls. |
---|---|
24016 | Change Media interface settings failed. Need to wait for system to be idle with no active calls. |
Code | Definition |
---|---|
31001 | SG (%1%) cannot |
be activated while its SIP Server Table (%2%) |
is empty. | |
31002 | SG (%1%) outbound group must have valid server cluster. |
---|---|
31003 | Cannot delete SIP to Q.850 mapping (%1%). It is in use by SG (%2%). |
31004 | Cannot delete Q.850 to SIP mapping (%1%). It is in use by SG (%2%). |
31005 | Cannot delete SIP profile (%1%). It is in use by SG (%2%). |
31006 | Registrar Table %1% being used by SIP Signaling Group %2% (%3%) not found. |
31007 | Cannot delete SIP server cluster (%1%). It is in use by SG (%2%). |
31008 | Found server(s) (%1%) which doesn't belong to any cluster. |
31009 | Cannot delete TLS profile (%1%). It is in use by SG/Server (%2%). |
31010 | Cannot delete Remote Authorization Table (%1%). It is in use by Server (%2%). |
31011 | Cannot delete Contact Registrant Table (%1%). It is in use by Server (%2%). |
31012 | Invalid Federated IP/FQDN (%1%) mask. General note when entering 'Federated IP(FQDN) Mask': Mask 0.0.0.0 is allowed only with IP 0.0.0.0. When mask is blank 255.255.255.255 is assumed. |
31013 | Invalid 'Federated IP(FQDN)/Mask' combination: %1%. General note when entering 'Federated IP(FQDN)/Mask': Mask 0.0.0.0 is allowed only with IP 0.0.0.0. When mask is blank 255.255.255.255 is assumed. |
31014 | Network interface: %1% (%2%) is in use by SIP SG(s): %3%. Clear the calls and disable the SIP SGs before changing network interface. After the change enable SIP SGs. |
31015 | %1% port in use by TCP and TLS protocols. |
31016 | %1% is in use by SIP SG(s): %2%. |
31017 | %1% is in use by MessageTableId:RuleId= %2%. |
31018 | Number of SIP Message rules in a table should not exceed 32. |
31019 | Invalid Federated IP address in SG(%1%). |
31020 | Can't mix server types IP/FQDN and DNS-SRV in the same SIP Server Table (%1%). |
31021 | All Stream Modes can not be Disabled in SG(%1%). |
31022 | Can't have DNS-SRV entries with same Domain/FQDN and protocol in SIP Server Table (%1%). |
31023 | Only one DNS-SRV Domain/FQDN allowed per SIP Server Table (%1%). |
31024 | Trunk group %1% references non-existing signaling group %2% |
31025 | Trunk group %1% references no signaling groups |
31026 | Trunk group %1% has an invalid Trunk ID %2% |
31027 | Trunk group %1% has an invalid Trunk-Context %2% |
31028 | Signaling Group %1% Listen Protocol and SIP Server Host Protocol mismatch |
31029 | Cipher %1% in TLS Profile %2% is not supported. |
31030 | Cipher %1% invalid TLS Profile %2% is repeated. |
31031 | Invalid cipher %1% for configured TLS Protocol %2% in TLS-profile %3%. |
31032 | Cannot delete last SIP server entry if table is |
in use by SG. This table |
is in use by SG %1%. | |
31033 | Found NAT Prefix Entry (%1%) which doesn't belong to any Qualified Prefix Table. |
---|---|
31034 | NAT Qualified Prefix Entry has an invalid IP (%1%). |
31035 | NAT Qualified Prefix Entry has an invalid Netmask (%1%). |
31036 | SIP Server table is in use by SG %1%. |
31037 | Duplicate IP/FQDN and netmask/prefix found. |
31038 | Signaling Group %1% Listen Protocol and SIP Voice Quality Server Transport |
Protocol mismatch. | |
31039 | Cannot delete the Signaling Group %1% . It is in use by the SIP Voice Quality Server. |
---|---|
31040 | SIP Profile attribute 'Send Number of Audio Channels' must be false for SG %1% with Interop Mode 0365. |
31041 | Signaling Group %1% supports only DSP Audio Stream Mode for Media List %2%. |
31042 | Registrar table %1% has too many users configured. Maximum %2% allowed on SBC 1k/2k. |
31043 | More than one Signaling Group is listening on same %1% port with different TLS Profile ID. Must use another listener port. |
31044 | TLS Profile %1% Client and Server Certificate ID mismatch. |
Code | Definition |
---|---|
25001 | Empty Bad Actor Type. |
25002 | Invalid Bad Actor Type. |
25003 | Empty Bad Actor Data. |
25004 | Invalid Bad Actor Data. |
25005 | Empty Bad Actor Precedence. |
25006 | Invalid Bad Actor Precedence. |
25007 | Maximum number of bad actors reached. |
25008 | Duplicate or Invalid row ID for bad actors encountered. |
25009 | Internal error encountered. |
25010 | ACL Table has ACL rules configured through Ribbon Protect. |
25011 | Same Precedence value is used by other Bad Actor |
. |
Code | Definition |
---|---|
32001 | SG (%1%) Loop Start FXS Profile must have valid profile. |
32002 | SG (%1%) Loop Start FXO Profile must have valid profile. |
32003 | SG (%1%) E&M Profile must have valid profile. |
32004 | SG (%1%) R2 Profile must have valid profile. |
32005 | Cannot delete FXS profile (%1%). It is in use by SG (%2%). |
32006 | Cannot delete FXO profile (%1%). It is in use by SG (%2%). |
32007 | Cannot delete E&M profile (%1%). It is in use by SG (%2%). |
32008 | Cannot delete R2 profile (%1%). It is in use by SG (%2%). |
32009 | Channel %1%.%2%.%3% is assigned to Signaling Groups %4% and %5%. |
32010 | Signaling Group %1% channel list incorrectly defined. |
Code | Definition |
---|---|
33001 | RIP configuration failed %1% . |
33002 | RIP instance already present, only 1 instance allowed. |
33003 | Bad Routing Protocol - %1% |
33004 | Bad OSPF Area ID Configuration - %1% |
33005 | Bad OSPF Area Type Configuration - %1% |
33006 | Bad OSPF Router ID Configuration -%1% |
33007 | Bad OSPF configuration - %1% |
33008 | Bad Routing interface configuration - %1% |
33009 | OSPF process ID %1% is already configured in OSPF, use a different process ID. |
33010 | OSPF Router ID is already configured in OSPF, use a different Router ID. |
33011 | OSPF process ID cannot be modified. Use configured process ID for attribute: OSPFProcessID |
33012 | OSPF Area ID cannot be modified. Use configured Area ID for attribute: OSPFAreaID |
33013 | OSPF Area Type cannot be modified. Use configured Area Type for attribute: OSPFAreaType |
33014 | Maximum Router Instances limit reached. Only 6 Routing Instances are allowed. |