This section provides information on the Sonus Ribbon
hardware platform specifications.
The Sonus Ribbon
is a 2U rack-mounted chassis. The chassis can be front or center mounted in a standard 19 or 23 inch wide rack. At a high level, a fully populated
system is comprised of the following key components.
- Motherboard
- Four DSP25 or one DSP20 modules
- Three Fan assemblies
- Solid State Drive (SSD)
- Two power supplies
Caption |
---|
0 | Figure |
---|
1 | SBC 5400 Chassis Front View |
---|
|
|
![](/download/attachments/203788106/5400_frontview.png?version=1&modificationDate=1469118841000&api=v2)
Caption |
---|
0 | Figure |
---|
1 | SBC 5400 Chassis Rear View |
---|
|
|
![](/download/attachments/203788106/5400_rear_view.png?version=1&modificationDate=1469118871000&api=v2)
Caption |
---|
0 | Table |
---|
1 | SBC 5400 Hardware Specifications |
---|
3 | SBC 5400 Hardware Specifications |
---|
|
Front Panel | Rear Panel | Expansion (Modular) | Storage | Memory | Power Option |
---|
- Status Indicators Front Panel LEDs
- Single USB V2.0 interface
| - 4x100 4 x 100 Mb Management Ports with RJ45 connector
- Media Ports (1x10Gb or 4x1Gb2 x 10 Gb or 4 x 1 Gb) with SFPs
- Two 1 Gb speed High Availability Ports with SFPs
- 1x100 1 x 100 Mb Single Field Service port with RJ45 connector
- Locator LED
- Alarm port with HD15 connector
- Single serial craft DB9 port
| Four DSP25 or one DSP20 modules | 480 GB (minimum) or 512 GB SSD | 32 GB RAM | AC or DC |
|
Info |
---|
|
- The HA mode supports mix SSD capacity.
- The
show table system hardDiskStatus provides SSD size details. The shipped SSD size is determined based on availability.
|
The front panel includes status indicator LEDs and a single USB 2.0 port.
The SBC 5400 Front bezel LEDs shows the front panel LEDs with and without bezel mounted on the front panel of
.
Anchor |
---|
| Front Bezel and LEDs of SBC 5400 Series |
---|
| Front Bezel and LEDs of SBC 5400 Series |
---|
|
Caption |
---|
0 | Figure |
---|
1 | SBC 5400 Front Bezel LEDs |
---|
|
![5400_front_bazel_LEDs.png](/plugins/servlet/confluence/placeholder/unknown-attachment?locale=en_GB&version=2)
|
Caption |
---|
0 | Figure |
---|
1 | SBC 5400 Fan Control LEDs |
---|
|
![Fan_LEDs.png](/plugins/servlet/confluence/placeholder/unknown-attachment?locale=en_GB&version=2)
|
The Front panel LEDs Description table lists the front panel LEDs on the
.
Caption |
---|
0 | Table |
---|
1 | Front panel LEDs Description |
---|
3 | Front panel LEDs Description |
---|
|
Illustration | LED | Color | Description |
---|
1 | Front Power | Amber/Green | Power status indicator of all voltages generated on the module: - Green = All Power on
- Off = BMC Power on or chassis power is off
| 2 | Front Status | Amber/Green | Module Status indicator | 3 | Front Active | Amber/Green | Module Redundancy State Indicator: | 4 | Front Alarm | Amber/Red | Module Critical/Major Failure Indicator: | 5 | Front Locator | White | Module identifier indicator. On or blinking, depending on the "ipmitool chassis identify" command. | 6 | FanCtl LED* | Green | Fan module indicator: - Green = Fan module is working
- Off = Fan module is not working
|
|
Info |
---|
* LED is visible only when the bezel is removed. |
The rear panel layout and LEDs are as depicted in the Rear Panel LEDs for SBC 5400 figure:
Anchor |
---|
| Rear Panel LEDs for SBC 5400 |
---|
| Rear Panel LEDs for SBC 5400 |
---|
|
Caption |
---|
0 | Figure |
---|
1 | Rear Panel LEDs for SBC 5400 |
---|
|
![](/download/attachments/203788106/5400_rear.png?version=1&modificationDate=1469118901000&api=v2)
|
The Rear Panel Description table lists the Ethernet port LEDs. Each of the Management ports, Media ports, HA ports, and FSP port support the following LEDs.
Caption |
---|
0 | Table |
---|
1 | Rear Panel Description |
---|
3 | Rear Panel Description |
---|
|
Component | Cable Requirement | Description |
---|
Alarm Port | Customer supplied cable | Alarm contact via a single shielded male HD15 connector. A single alarm port is present in SBC 5400 platform. This software release does not support the Alarm Port. | Management Ports | CAT5e cable | Four copper Ethernet Ports which process Management traffic and perform protocol termination. | Locator | | Module identifier indicator | Media Ports | Single mode or Multi mode fiber/copper CAT5e cable | Four copper SFP or fiber SFP ports for media and signaling traffic. | High Availability Ports | Single mode or Multi mode fiber/copper CAT5e cable (NON-CROSSOVER TYPE ONLY) | Two copper SFP or fiber SFP ports for redundancy synchronization traffic. The platform supports box level redundancy via communication paths provided by the external HA Ethernet ports. | Serial Port | Male DB9 connector | An RS-232 port used by BMC. | Field Service Port | Copper CAT5e cable | A single Field Service Port. | Power Input | | Power Supply. The following are the descriptions of the power supply LED functions: - Off: No power input to the supply.
- Amber: Power supply fault.
- Blinking Amber: Main system power output fault.
- Blinking Green: Standby power to BMC is ON but main system power is not enabled.
- Solid Green: Both standby power to BMC and main system power are ON and OK.
|
|
Warning |
---|
|
SonusRibbon-provided SFP modules must be used to guarantee proper operation of the external ports. Failure to follow this recommendation may cause permanent damage to the system. |
Info |
---|
|
CAT6 cabling may be required in environments where there is unusually high Electro-Magnetic interference (EMI) from power lines, manufacturing equipment, or certain types of lighting. |
The Ethernet Port LEDs Description table shows the two green LEDs (solid green and flashing green) for each network port.
Anchor |
---|
| Ethernet Port LEDs Description |
---|
| Ethernet Port LEDs Description |
---|
|
Caption |
---|
0 | Table |
---|
1 | Ethernet Port LEDs Description |
---|
3 | Ethernet Port LEDs Description |
---|
|
Port Type | Color | Description |
---|
Mgmt0/Mgmt1/Mgmt2/Mgmt3 | Green | - The Link LED is Solid Green when the link is up.
- The Activity LED is Flashing Green when there is activity present on the port.
| Media ports 0, 1, 2, and 3 | Green | - The Link LED is Solid Green when the link is up.
- The Activity LED is Flashing Green when there is activity present on the port.
| HA ports 0 and 1 | Green | - The Link LED is Solid Green when the link is up.
- The Activity LED is Flashing Green when there is activity present on the port.
| Field Service Port | Green | - The Link LED is Solid Green when the link is up.
- The Activity LED is Flashing Green when there is activity present on the port.
|
|
The
chassis comprises the following external input and output ports:
- Alarm contacts are provided on the outside of the chassis through a single shielded male HD15 connector.
- A standard USB connector on the front of the chassis.
- Front and rear jacks for standard ESD straps.
- Cable management.