Page History

...

1. Select the Media SBC Cluster.Click Configuration tab.

2. Click New Configuration. The new configuration window is displayed.

3. Select Version and Master Configurator from the drop-down menu. Enter the Configuration Name.

   Caption
   0 Figure 1 M-SBC Configuring
   Image Modified

4. Click Create. The configurator clears db and reboots. Rebooting might take approximately five minutes.
5. Click Open Editor to launch SBC Configuration Manager.
6. To validate the meta variable table, see Validating the Meta Variable Table.

7. To create an IP interface group and an IP Interface, see Creating an IP Interface Group and an IP Interface.

8. To create Static Route, see Creating Static Route.
9. To create D-SBC SigPort, see Creating D-SBC SigPort.
10. To create DNS group and DNS server, see Creating DNS Group and DNS Server.
11. To create an NTP server, see Creating a NTP Server.
12. To create a Load Balancing service, see Creating a Load Balancing Service.

13. Click Applied Saved Changes and click Close.

14. In the Cluster Management page click Activate Configuration.

    Caption
    0 Figure 1 Activating Configuration
    Image Modified

    
     A message Configuration Activated is displayed.

...

To validate the meta variable table, click All > System > Meta Variables. The Meta Variable page displays.

Caption
0 Figure 1 Meta Variables
Image Modified

Anchor
step1 step1

Creating an IP Interface Group and an IP Interface

...

1. Log into EMS SWe as admin user.
2. In Network Management, click Cluster/VNF Management. The Manage Cluster/VNFs list is displayed.
   
3. Select Media SBC Cluster and navigate to the Configurations tab.
   
4. Select Configuration from the list.

5. Click View Configuration. The SBC Configuration Manager page displays.

   Caption
   0 Figure 1 M-SBC Configuration Manager

   
   

6. Click All tab.
   

7. Select Address Context > IP Interface Group. The IP Interface Group List page displays.

8. Select default from the Address Context drop-down menu.

9. Click New IP Interface Group. The Create New IP Interface Group section displays.

10. Enter an IP interface group name. Example: MLIG1

11. Click Save.

    Caption
    0 Figure 1 IP Interface Group 3 IP Interface Group

    
    The Object created successfully message displays.

12. Repeat step 7 through step 11 to create another interface group. Example: MLIG2. The two interface groups are listed.
    

    Caption
    0 Figure 1 Created IP Interface Group

...

1. Select System > NTP > Server Admin. The Server Admin page displays.

2. Click + New Server Admin. The Create New Server Admin section displays.
3. Enter server IP address.
4. Select State as Enabled.
5. Select Version as Version4.

6. Click Save.

   Caption
   0 Figure 1 NTP Server Admin

   
   The Object created successfully message displays.
   
   

7. Select System > NTP > Time Zone. The Time Zone page displays.

8. Select the instance from the list. The Edit Selected Time Zone section displays.

9. Select an appropriate time zone from the Zone drop-down menu.

10. Click Save.

    Caption
    0 Figure 1 Configuring Time Zone

    
    The Updated Successfully message displays.

...

Anchor
step5 step5

Creating a Load Balancing Service

...