Configuration of SBC SWe clusters on OpenStack or SBC SWe N:1 deployments can be accomplished using the SBC Configuration Manager GUI which you access through the EMS.
Before configuring D-SBC (S-SBC and M-SBC) deployments, you must configure the DNS server for the M-SBC with the MGT/PKT0/PKT1 IP addresses for the Load Balancing Service (LBS). For D-SBC Sig Port service, configure the DNS server for the M-SBC fixed IP address of the packet interface PKT0/PKT1 (if floating IP is not configured on the interface). The IP addresses depend on the deployed network.
If your I-SBC deployment is registered with the Insight EMS, you can use the SBC Configuration Manager GUI to configure it. Basic configuration of I-SBC deployments includes a combination of most of the procedures required for the individual distributed SBC components so that both signaling and media configuration is completed.
Note
Once SBC instances are configured, you must configure PSX for making a basic call. For more information on configuring PSX, refer to PSX Provisioning documentation.
Overview
Content Tools