Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Use this object to view and/or edit ingress Trunk group for the selected Signaling Profile.

To View and Edit Ingress

On SBC main screen, go to Configuration > System Provisioning > Category: Call Routing > Profiles > Signaling Profile > Ingress.

The Signaling - Ingress can be checked for specific Signaling Profile. Choose the desired Signaling Profile from the drop-down box.

Caption
0Figure
1Call Routing - Profiles - Signaling Profile - Ingress Main Window

Image Removed

The Ingress window is displayed.

Caption
0Figure
1Call Routing - Profiles - Signaling Profile - Ingress Edit Window

Image Removed

The following fields are displayed:

...

0Table
1Call Routing - Profiles - Signaling Profile - Ingress Parameters

...

When enabled, the Calling Party Validation feature is enabled, which disallows calls that do not contain a calling party number.

  • disable (default)
  • enable

...

When enabled, disallows the calls when the TNS parameter matches the originating carrier assigned to the ingress trunk group.

  • disable (default)
  • enable

...

When enabled, disallows the calls to be completed if there is no billing number.

  • disable (default)
  • enable

...

When enabled, all calls without OLIP will be rejected.

  • disable (default)
  • enable

...

When enabled, the PSX informs the SBC to discard the backward redirection information parameter received in REL.

  • disable (default)
  • enable

...

When enabled, the PSX informs the SBC to discard the redirection count parameter.

  • disable
  • enable (default)

...

When enabled, controls the generation of the EXM message on the associated ingress trunk group.

  • disable (default)
  • enable

...

When enabled, redirection capabilities are enabled on the ingress trunk group.

  • disable (default)
  • enable

...

When enabled, the SBC generates the FE parameter in the short form.

  • disable (default)
  • enable

...

When enabled, the PSX generates charge band information for billing purposes and sends the information to the SBC in policy responses on a per-route basis.

  • disable (default)
  • enable

...

When enabled, PSX instructs the SBC to send CPGs (call progress messages) in a backward direction, releasing the ingress leg.

  • disable (default)
  • enable

...

When enabled, the PSX performs calling party screening and retrieves the configured member status from the subscriber table.

  • disable
  • enable (default)

...

When enabled, the PSX will perform Calling Party Category (CPC) screening to determine if this call should be restricted based on the received CPC.

  • disable (default)
  • enable

...

When enabled, it propagates the egress PSTN channel information in SIP 18x/200 or Final Response messages returned by a SBC to this SIP Server (via the "chan" parameter in the To: field).

  • disable (default)
  • enable

...

When enabled, it controls the propagation of the FE parameter in the backward directions for call arriving on the associated trunk group.

  • disable (default)
  • enable

...

When enabled, controls the propagation of the FE parameter in the backward directions for call arriving on the associated trunk group.

  • disable (default)
  • enable

...

When enabled, calls arriving with carrier code 0000 are treated as if there is no carrier code.

  • disable (default)
  • enable

...

When enabled, and the called party goes on hook, the SBC starts the SUS (Suspend) timer and releases the call when the SUS timer expires.

  • disable (default)
  • enable

...

When enabled, the SoftSwitch verifies that the Generic Address Parameter (GAP) type field is set to Ported Number.

  • disable (default)
  • enable

Make the required changes to the required fields and click Save to save the changes.