Versions Compared

Old Version 4

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version 5

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

This object contains signaling packet capture devices and admin state. The The Signaling Packet Capture configuration is described in this section. The Signaling Packet Capture data is stored in a ".PKT" file under /var/log/sonus/evlog/evlog location.

note
Info
title
Note

In the absence of any device or filter configuration, The the Signaling Packet Capture will capture feature only the captures SIP/H323 H.323 signaling for calls which are traced by Call Trace Filters.

...

 

On the SBC main screen, go to Troubleshooting > Troubleshooting Configuration > Call Trace >Signaling Packet Capture.To View and Edit Signaling Packet Capture

The Signaling Packet Capture window is displayed.

...

Caption
0Table
1Signaling Packet Capture Parameters
ParameterDescription
Signaling Packet Capture TimerSpecifies the The signaling packet capture timer in seconds. It describes the call trace timer , in minutes, for both Calls and Error Trace Filterscall and error trace filters. The value ranges from 0 to 360 seconds and the minutes, with a default value is of 180 seconds.
State

Use this flag to enable/disable Signaling Packet Captures. It also specifies the administrative state of signaling packet capture:signaling packet captures by enabling/disabling the timer.

  • Disable disabled (default)
  •  enabledEnable

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

...