...
| Caption |
|---|
|
 Image Modified
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
...
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Zone Create Window |
|---|
|
Image Modified |
The following fields are displayed:
| Caption |
|---|
|
Parameter
|
Description
|
|---|
Name
| Specifies the name of the zone. Must be 1-23 characters. The value ranges up to 23 characters. | Note |
|---|
Zone name is unique across all address contexts. |
| IdID
| Unique ID of this zone. The value ranges from 1 to 4096. | Note |
|---|
Zone ID is unique across all address contexts. |
| Disable Zone Level Loop Detection | If disabled, Global Loop Detection flag takes precedence. If enabled, Loop Detection is disabled, irrespective of Global Loop Detection flag.
| DNS Group
| The name of the DNS group. Select the DNS group from the drop-down list. | Remote Device Type | Specifies the type of device facing this Zone. The options are: | Domain Name | Specifies the name of the fully qualified domain name for this Zone. The value ranges up to 63 characters. | SIP Register Relay | Enable flag to relay REGISTER using the routes from PSX. Options are: | Dialog Transparency | This parameter specifies if dialog transparency is enabled for SIP messages processed in that zone. If enabled, SBC sends "Call-ID", "From" tag, and "To" tag transparently in the outgoing message. | Note |
|---|
The parameter Dialog Transparency must be enabled in both the ingress and egress zones. |
| Note |
|---|
To enable Dialog Transparency for a zone, first disable all Sip Sig Port for that zone. |
| Flexible Policy Adapter Profile | Use this Zone/Trunk Group parameter to associate a Sip Adapter Profile configured for flexible policy (Profile TypeFlexible Policy) with a particular Zone/Trunk Group. If Flexible Policy Adapter Profile is provisioned both at the trunk group and zone levels, the trunk group’s profile takes precedence. If Input Adapter Profile is configured, it is applied first to manipulate the PDU and then Flexible Policy Adapter Profile rules are applied on the manipulated PDU. | Include Page |
|---|
| ePSX_and_PSX only_Flexible_Policy |
|---|
| ePSX_and_PSX only_Flexible_Policy |
|---|
|
|
|
To Delete Zone
To delete any of the created Zone, click the radio button next to the specific Zone which you want to delete.
...