Page History

...

• SNMP Manager Address: IP address or the FQDN of the SNMP manager when a MIB browser is running
• Community: Enter a desired community name. In this exercise we use public as the community name
• Community Type: Must be set to Read-only
• Trap Enabled: Not required but for this exercise we are setting it up as True

Step 2 - Installing an SNMP Management Client

...

1. On a PC that is dedicated to be the SNMP Manager download iReasoning MIB Browser and install using the default settings
2. Launch iReasoning from the start menu
3. Click the Advanced...button as shown below and enter the following information:
   • Address: IP Aaddress of Sonus SBC 1000/2000
   • Port: Keep the default value (161)
   • Read Community: public
   • Write Community: Leave it blank

   • SNMP Version:2

     Caption 0 Figure 1 Install SNMP Management Client Image Modified

Step 3 - Start Managing Sonus SBC 1000/2000 via SNMP

...

1. Download the MIB files located on the SNMP MIBs Reference page

2. In the iReasoning MIB Browser, click the File menu and select Load MIBs

   Caption 0 Figure 1 Load MIBs Image Modified

3. Browse to location where you saved the MIB files obtained in the initial step

4. Select all MIB files and hit Open

   Caption 0 Figure 1 Open Files Image Modified

Traps include both alarms and events. If you want to receive Trap for alarms and events from Sonus SBC 1000/2000, perform the following steps:

1. In the iReasoning MIB Browser, click the Tools menu item and select Trap Receiveras shown below:

   Caption 0 Figure 1 Trap Receiver Image Modified

2. Click Trap Filter, add the IP address of Sonus SBC 1000/2000 node, and hit OK

   Caption 0 Figure 1 Trap Filter Image Modified

3. Navigate to the privatefolder* navigation pane to see the relevant Sonus SBC 1000/2000 MIBs as shown below:

   Caption 0 Figure 1 Private Folder Navigation Pane Image Modified