This page describes how to configure SNMP on the SBC Edge and manage it using the iReasoning MIB Browser:
The SBC Edge SNMP Management Address Table entry should be created and configured with following information:
SNMP Management Addresses Table Entry
There are a various number of MIB Browsers available to download and use on the internet. For this exercise, we will be using a free edition of the iReasoning MIB Browser.
Follow the steps below to install, configure, and use the iReasoning MIB Browser:
SNMP Version:2
Install SNMP Management Client
To start managing the SBC via SNMP, load the SBC's SNMP MIB files files into the iReasoning MIB Browser:
In the iReasoning MIB Browser, click the File menu and select Load MIBs.
Load MIBs
Select all MIB files and click Open.
Open Files
Traps include both alarms and events. If you want to receive Trap for alarms and events from the SBC Edge, perform the following steps (SBC 1000/2000 example is used here):
In the iReasoning MIB Browser, click the Tools menu item and select Trap Receiver as shown below:
Trap Receiver
Click Trap Filter, add the IP address of SBC 1000/2000 node, and click OK.
Trap Filter
Navigate to the private folder* navigation pane to see the relevant SBC 1000/2000 MIBs as shown below:
Private Folder Navigation Pane