Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • SNMP Manager Address: IP address or the FQDN of the SNMP manager when a MIB browser is running
  • Community: Enter a desired community name. In this exercise we use public as the community name
  • Community Type: Must be set to Read-only
  • Trap Enabled: Not required but for this exercise we are setting it up as True

Panel
borderStylenone

Caption
0Figure
1SNMP Management Addresses Table Entry

Image Modified 

 

Step 2 - Installing an SNMP Management Client

...

  1. On a PC that is dedicated to be the SNMP Manager download iReasoning MIB Browser and install using the default settings
  2. Launch iReasoning from the start menu
  3. Click the Advanced...button as shown below and enter the following information:
    • Address: IP Aaddress of Sonus SBC 1000/2000
    • Port: Keep the default value (161)
    • Read Community: public
    • Write Community: Leave it blank
    • SNMP Version:2

      Panel
      borderStylenone

      Caption
      0Figure
      1Install SNMP Management Client

      Image Modified 

Step 3 - Start Managing Sonus SBC 1000/2000 via SNMP

...

  1. Download the MIB files located on the SNMP MIBs Reference page
  2. In the iReasoning MIB Browser, click the File menu and select Load MIBs

    Panel
    borderStylenone

    Caption
    0Figure
    1Load MIBs

    Image Modified

  3. Browse to location where you saved the MIB files obtained in the initial step
  4. Select all MIB files and hit Open

    Panel
    borderStylenone

    Caption
    0Figure
    1Open Files

    Image Modified

Traps include both alarms and events. If you want to receive Trap for alarms and events from Sonus SBC 1000/2000, perform the following steps:

  1. In the iReasoning MIB Browser, click the Tools menu item and select Trap Receiveras shown below:

    Panel
    borderStylenone

    Caption
    0Figure
    1Trap Receiver

    Image Modified

  2. Click Trap Filter, add the IP address of Sonus SBC 1000/2000 node, and hit OK

    Panel
    borderStylenone

    Caption
    0Figure
    1Trap Filter

    Image Modified

  3. Navigate to the privatefolder* navigation pane to see the relevant Sonus SBC 1000/2000 MIBs as shown below:

    Panel
    borderStylenone

    Caption
    0Figure
    1Private Folder Navigation Pane

    Image Modified