Page History
...
| Tip | ||||
|---|---|---|---|---|
Usage of the Easy Config wizard to configure the Sonus SBC 1000/2000
| ||||
| Info |
The Sonus SBC 1000/2000 Easy Config interface includes a built-in step-by-step setup configuration wizard, which enables end-users to quickly deploy Sonus SBC 1000/2000 in an Enterprise's Lync environment with a SIP Trunk Provider to an IP phone. The Sonus SBC 1000/2000 can be configured to use a SIP trunk to connect to IP phones using the automatic setup wizard as described in the section below.
...
| Panel | ||||
|---|---|---|---|---|
| ||||
Enter the name to describe the SIP Trunk ↔ IP Phone setup.
|
...
| Panel | ||||
|---|---|---|---|---|
| ||||
| IP Phone Registrar. This field is fixed. |
...
Step 2 - Configure SIP Details for Endpoint
...
| Panel | ||||
|---|---|---|---|---|
| ||||
The IP protocol to use for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060. |
...
| Panel | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the (
| |||||||
| Noprint |
AT&T IP Flexible Reach - Field Definitions
...
| Panel | ||||
|---|---|---|---|---|
| ||||
The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
The Port Number is used for sending and receiving messages between Sonus SBC 1000/2000 and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060. |
...
| Panel | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| |||||||
| Noprint |
| Pagebreak |
|---|
Verizon Managed Service - Field Definitions
...
| Panel | ||||
|---|---|---|---|---|
| ||||
The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. This value is fixed at UDP. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060. |
...
| Panel | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
|
| Pagebreak |
|---|
...
KDDI SIP Trunk - Field Definitions
...
| Panel | ||||
|---|---|---|---|---|
| ||||
| The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
| The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
| The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060. |
...
| Panel | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the (
| |||||||
| Noprint | |||||||
| Pagebreak |
|---|
Broadsoft Trunk - Field Definitions
...
| Panel | ||||
|---|---|---|---|---|
| ||||
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060. |
...
| Panel | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the (
|
| Pagebreak |
|---|
...
Step 3 - Confirm and Submit Configuration
...
| Section | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Pagebreak |
|---|
Overview
Content Tools