Page History

This page describes how to configure Sonus configure 

Spacevars
0 company

Spacevars
0 product

for Active Directory User Group Access:

...

Note
When configuring the Domain Controller, we recommend using a domain name other than the Domain Admin user.

Step 1 - Configure the Domain Controllers

This step allows you to specify the Domain Controller(s) which will be used in the

Spacevars
0 product

system. The information from the same domain controller(s) will be used for AD-based telephony routing and for Logging in to Sonus SBC Edge using an AD domain user.

...

• Description: The name you wish to use for referencing this domain controller - used in the next step
• IP Address/FQDN: IP address or FQDN of the Domain Controller
• Search Scope: for example dc=uxdemo,dc=net
• LDAP Query: for example userPrincipalName=*
  
  

Panel
borderStyle none
Caption 0 Figure 1 Create Domain Controller

 

Step 2 - Configure

...

SBC Edge for Active Directory Access

In this step, we configure the Active Directory settings on Sonus 

Spacevars
0 product

such that we can authenticate users through the Domain Controller created earlier. Configuring the SBC Edge for Active Directory with the following settings:

...

• Select the Domain Controller - created in Step 1

Step 3 - Configure AD User Group to Access Level Mapping

In this step, we map the Active Directory (AD) group with the Sonus SBC Edge access level for the AD user we wish to grant access on the

Spacevars
0 product

:

...

Panel
borderStyle none
Caption 0 Figure 1 Create User Group Mapping

 

Step 4 - Login with an Active Directory Domain User

To verify the AD domain user can access the Sonus 

Spacevars
0 product

, the AD username must be supplied in the format USERNAME@DOMAIN - see How User Authentication Works. Enter the following in the login screen

...