This page describes how to configure Ribbon SBC Edge for Active Directory User Group Access:
When configuring the Domain Controller, we recommend using a domain name other than the Domain Admin user.
This step allows you to specify the Domain Controller(s) which will be used in the SBC Edgesystem. The information from the same domain controller(s) will be used for AD-based telephony routing and for Logging in to SBC Edge using an AD domain user.
To add a Domain Controller, follow the instructions outlined in Adding and Modifying Domain Controllers with the following settings:
dc=uxdemo,dc=net
userPrincipalName=*
In this step, we configure the Active Directory settings on SBC Edge such that we can authenticate users through the Domain Controller created earlier. Configuring the SBC Edge for Active Directory with the following settings:
In the Active Directory Configuration settings group:
In the Cache Settings group:
telephoneNumber, msRTCSIP-Line, mobile, displayName, userPrincipalName
In the User Authentication Settings
In this step, we map the Active Directory (AD) group with the SBC Edge access level for the AD user we wish to grant access on the SBC Edge:
To verify the AD domain user can access the SBC Edge, the AD username must be supplied in the format USERNAME@DOMAIN
- see How User Authentication Works. Enter the following in the login screen
USERNAME@DOMAIN
; for example readonlyuser1@uxdemo.net