Page History

Usage of the Easy Config wizard to configure the

Broadsoft Trunk is applicable only if the user endpoint is an IP phone.

These instructions assume the SBC Easy Config wizard is running. See Using the Easy Configuration Wizard.

The scenario in which the configuration template is provided. In this case, select SIP Trunk ↔ IP Phones.

Enter the name to describe the SIP Trunk ↔ IP Phone setup.

The country in which the  SIP Trunk ↔ IP Phones originates.

The E911 Elin number from the "CompanyName" field configured in Lync location services is used as the authoritative Call Back number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Lync Setup. For more information, see Creating and Modifying Entries to Transformation Tables.

Defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below.

Options:  ELIN Identifier, E911/E112 or None.

Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.

Second Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.

Defines the Public Safety Answering Point Number. Valid entry 1 - 127 characters.

Number of simultaneous SIP sessions allocated. Valid entry 1 - 960.

The SIP trunk used for connection to the IP phones. Valid options: Generic SIP Trunk, AT&T IP Flexible Reach, Verizon Managed Service, KDDI SIP Trunk and Broadsoft Trunk.

The SIP Trunk selected determines the field options displayed in Step 2. See Step 2 - Configure SIP Details for Endpoint.

Defines the Broadsoft Trunk Type. Valid entry: Enterprise or Access.

This field is available only when the SIP Trunk type is Broadsoft Trunk.

The FQDN or IP address of the Session Border Controller service provider.

The IP protocol to use for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP.

The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.

Enables or disables the secondary Session Border Controller service provider configured. 

Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.

The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.

The Port Number used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled.

Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.

The Protocol used for communicating with the IP phone.  Valid entry: UDP or TCP.

The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.

Configure a network address and Netmask for the host or subnet in in which the IP phones reside.

Network IP. IP address for the destination host or subnet in which the IP phone resides.

Netmask. The network mask of the destination host or subnet in which the IP phones resides.

To create a network address, click the ( ) icon.  Enter the Network IP and Network Mask and click OK.

The FQDN or IP address of the Session Border Controller service provider.

The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP.

The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.

Enables or disables the secondary Session Border Controller service provider configured. 

Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.

The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.

The Port Number is used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled.

Enables/disables AT&T Forking Feature. Valid option: Yes or No.

Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled.

The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled.

Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.

The Protocol used for communicating with the IP phone.  Valid entry: UDP or TCP.

The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.

Configure a network address and Netmask for the host or subnet in which the IP phone resides.

Network IP. IP address for the destination host or subnet in which the IP phone resides.

Netmask. The network mask of the destination host or subnet in which the IP phones resides.

To create a network address, click the ( ) icon.  Enter the Network IP and Network Mask and click OK.

The FQDN or IP address of the Session Border Controller service provider.

The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. This value is fixed at UDP.

The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.

Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.

The Protocol used for communicating with the IP phone.  Valid entry: UDP or TCP.

The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.

Configure a network address and Netmask for the host or subnet in which the IP phone resides.

Network IP. IP address for the destination host or subnet in which the IP phone resides.

Netmask. The network mask of the destination host or subnet in which the IP phones resides.

To create a network address, click the ( ) icon.  Enter the Network IP and Network Mask and click OK.

Configure a network address and Netmask for the host or subnet in which the IP phone resides.

Network IP. IP address for the destination host or subnet in which the IP phone resides.

Netmask. The network mask of the destination host or subnet in which the IP phones resides.

To create a network address, click the ( ) icon.  Enter the Network IP and Network Mask and click OK.

The FQDN of the server domain.

Enables/disables Enterprise Trunking. This field is available only when Enterprise Trunking is selected in the Broadsoft Trunk Type field.

Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.

The Protocol used for communicating with the IP phone.  Valid entry: UDP or TCP.

The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.

Configure a network address and Netmask for the host or subnet in which the IP phone resides.

Network IP. IP address for the destination host or subnet in which the IP phone resides.

Netmask. The network mask of the destination host or subnet in which the IP phones resides.

To create a network address, click the ( ) icon.  Enter the Network IP and Network Mask and click OK.