Use this object to define ingress IP prefixes. Up to 128 Ingress IP Prefix entries may be assigned to a SIP trunk group. Ingress peers matching these ingress IP prefixes are assigned to the specified SIP trunk group.
To View Ingress IP Prefix
On the
main screen, go to
Configuration >
System Provisioning >
Category: Trunk Provisioning >
Trunk Group >
SIP Trunk Group >
Ingress IP Prefix. The Ingress IP Prefix window is displayed.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | System Provisioning - Ingress IP Prefix |
|---|
|
|
To Edit Ingress IP Prefix
To edit any of the Ingress IP Prefixes in the list, click the radio button next to the specific Ingress IP Prefix name.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | System Provisioning - Ingress IP Prefix Highlighted |
|---|
|
|
The Edit Selected Ingress IP Prefix window is displayed below.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | System Provisioning - Ingress IP Prefix Edit Window |
|---|
|
|
You would not be able to edit as the fields are read-only.
To Create Ingress IP Prefix
To create a new Ingress IP Prefix, click New Ingress IP Prefix tab on the Ingress IP Prefix List panel.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | System Provisioning - Ingress IP Prefix Fields |
|---|
|
|
The Create New Ingress IP Prefix window is displayed.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | System Provisioning - Ingress IP Prefix Create Window |
|---|
|
|
The following fields are displayed:
| Caption |
|---|
| 0 | Table |
|---|
| 1 | System Provision - Ingress IP Prefix Parameters |
|---|
|
Parameter | Description |
|---|
IP Address | Specifies the IPv4 or IPv6 addresses of ingress peers. Enter the address in the following format: IPv4 – Specifies the V4 IP address in dotted decimal form (for example 10.11.12.0 24).IPv6 – The V6 IP address in hexadecimal/colon form (for example, fd00:21:445:128::7880 64).
| Prefix Length | Specifies the number of bits of address which form the network part of the IP address. Rest of the bits (128 – prefix length) specify the host part of the IP address. The value ranges from 0 to 128 and the default value is 0. |
|
To Copy Ingress IP Prefix
To copy any of the created Ingress IP Prefix and to make any minor changes, click the radio button next to the specific Ingress IP Prefix to highlight the row.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | System Provisioning - Ingress IP Prefix Highlighted |
|---|
|
|
Click Copy Ingress IP Prefix tab on the Ingress IP Prefix List panel.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | System Provisioning - Ingress IP Prefix Fields |
|---|
|
|
The Copy Selected Ingress IP Prefix window is displayed along with the field details which can be edited.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | System Provisioning - Ingress IP Prefix Copy Window |
|---|
|
|
Make the required changes to the required fields and click Save to save the changes. The copied Ingress IP Prefix is displayed at the bottom of the original Ingress IP Prefix in the Ingress IP Prefix List panel.
To Delete Ingress IP Prefix
To delete any of the created Ingress IP Prefix, click the radio button next to the specific Ingress IP Prefix which you want to delete.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | System Provisioning - Ingress IP Prefix Highlighted |
|---|
|
|
Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | System Provisioning - Ingress IP Prefix Delete Confirmation |
|---|
|
|
Click Yes to remove the specific Ingress IP Prefix from the list.