Page History

...

To configure CDC for cloud S-SBC instance, accomplish the following:

• Instantiate EMS SWe instance with LI interface support using the EMS_SA_HEAT_TEMPLATE_VERIZON Heat Template. For more information, refer to EMS SWe Standalone Instantiation for Geographical Redundancy (GR) Deployment.
  
• Create a configurator Configurator cluster. For more information, refer to Creating an SBC SWe Configurator Cluster.

• Create a configurator Configurator instance. For more information, refer to to Instantiating SBC Configurator Using non-DHCP using Heat Template.

S-SBC Basic Configuration

...

1. Log on to EMS as admin user.
   
2. Under Network Mgmnt, click Cluster / VNF Management. The Cluster/VNF Management window is displayed.

3. Create S-SBC cluster. For more information, refer to Creating an SBC SWe Cluster.
   

4. Click Configurations tab.

5. Click New Configuration. The New Configuration pane is displayed.

   Caption
   0 Figure 1 New Configuration

6. Click Master Configurator tab.

7. Select the version of the configuration from the Version drop-down.
   

8. Select SBC Configurator instance from the Master Configurator drop-down.
   This node is used to create the configuration. The SBC Configurator nodes are displayed based on the version selected. Only unlocked SBC Configurator nodes are listed.
   

9. Enter a name for the configuration in the Configuration Name field. The SBC configuration name contain only letters, numbers, dashes (-), apostrophes ('), underscores (_), colons (:) and spaces.
   

   Note
   The cluster ID is set as the default name for the first configuration. You can modify the name. The name must be unique. The subsequent configurations are named with a combination of cluster name and some unique identifying information. The default name varies based on how the configuration is created.

   
   

10. Click Create.
    A circular progress bar is displayed against the Master Configurator node. It takes around six minutes to load master configuration.

    Caption
    0 Figure 1 Configurator Loading

    When the Master Configurator node is loaded, the Open Editor button is displayed next to the Master Configurator node.

    Caption
    0 Figure 1 Open Editor

11. Click Open Editor. The SBC Configuration Manager window is displayed. 
    

    Caption
    0 Figure 1 SBC Configuration Manager

12. Create the basic S-SBC configuration on the SBC configurator. For information on S-SBC configuration, refer to Creating an SBC SWe Cluster.

13. Click Apply Saved Changes and Close. A circular progress bar is displayed.
    

    Caption
    0 Figure 1 Saving Configuration

    The configuration is saved on the EMS SWe and the following window displays:

    Caption
    0 Figure 1 Locked Configurator

14. Create CDC configuration (Proceed to Configuring CDC using EMS CALEA User Account).

...

To activate a cluster configuration for SBC SWe, accomplish the following:

Instantiate S-SBC instance by changing SBC Personality Type as ssbc. To apply the LI configuration, refer to Instantiating Standalone Media SBC.

...

1. Log on to EMS as admin user.
2. Under Network Mgmnt, click Cluster / VNF Management. The Cluster/VNF Management window is displayed.

3. Select S-SBC cluster for which the CDC configuration is created. 

4. Click Configuration tab.  The Configuration pane is displayed.

   Caption
   0 Figure 1 Configuration Pane 3 Configuration Pane

    

5. In Configuration Role column, select the configuration role to activate.

6. Click Activate Configuration. The Activation in progress status is displayed. When the activation is completed, the nodes in the cluster are updated with the active configuration, the Configuration Status is displayed as Last update complete.

7. Instantiate S-SBC instance (Proceed . For more information, refer to Instantiating S-SBC Instance).

...

1. using 1:1 Nested Heat Template.