Page History

This option initiates a simple test call from within the 

You can test a call for a SIP phone or Analog phone.

Testing a Call

1. In the WebUI, click the Diagnostics tab.

2. In the left navigation pane, under Tools, click Test a Call. 
   
   

   Caption
   0 Figure 1 Test a Call
   Image Modified

3. Enter the Destination Phone Number. This is the destination number of the SIP or analog phone being called (called party number).
4. Enter the optional Origination/Calling Number. This

1. number appears on the

1. phone receiving the call as the calling party

1. number to identify the call as the test call.
2. From the Call Routing Table drop down list, select a Call Routing Table. Ensure the Call Routing Table you select is configured properly. For information about Call Routing tables, see Managing Call Routing Tables.
3. Click OK.

Expected Outcome

Once the call is made, the call goes through the selected Call Routing Table. After the called party answers, the music file is played (the same file that is loaded on the SBC for Music on Hold).

For an unsuccessful call, check the following:

• Verify the Call Routing Table entry selected. Also check the Translation table for configuration. These tables determine how a call is routed and translated. 
  
• Review Local Log files. Log files record internal and external action on the SBC 2000 (these log files are not available on the SBC1000), including user visible actions (such as placing calls).
• Verify Music On Hold configuration. If configured to use a music file, but there is no music file, no music is played. If configured to use radio (live source), but there is no valid FXS port, no music is played.

• Live source through a FXS port is only applicable to SBC Edge, not SWe Lite.