Page History

Once you have updated the inactive partition either by Upgrading the Inactive Partition – SBC Edge or by Uploading Firmware Patches, new software does not take effect until you activate newly updated partition. When you activate the partition, the system must reboot to boot from the desired partition. All configuration is preserved when you activate the partition.

...

1. In the WebUI, click the Settings tab.

2. In the left navigation pane, go to System > Software Management > Application Partitions.

   Panel
   borderStyle none
   Caption 0 Figure 1 Application Partitions SBC 1K/2K Image Added Caption 0 Figure 1 SBC SWe Lite Image AddedImage Removed

3. Click the Set Active link in the row entry associated with the partition that you wish to activate.
   The inactive partition is the row entry listed without a tick mark under the 'Active Partition' column

4. You will be prompted to reboot the Sonus SBC Edge/SBC SWe Lite, click OK.

   Panel
   borderStyle none
   Caption 0 Figure 1 Reboot Prompt

   Note
   It will take up to 15 seconds for the action to be processed, and you will not see any visible indication during this short period of time.

5. The following status message will be dispatched indicating that the system is rebooting off of the new partition

   Panel
   borderStyle none
   Caption 0 Figure 1 Status Message

    

    

...