Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Caption
0Table
1Prerequisites

SBC Edge.

Important!  Complete

 Complete

the steps outlined in Certificate Requirements at Microsoft Technet.

 

Important!

  • Refer to the SBC Edge Release Information page for instructions on obtaining the latest firmware.
  • Failure to update to the latest firmware could lead to deployment failure.
  • Make sure to use the latest sustaining release (use X.X.459 rather than X.X.0, for example).
title

Important!

  • Refer to the SBC Edge Release Information page for instructions on obtaining the latest firmware.
  • Failure to update to the latest firmware could lead to deployment failure.
  • Make sure to use the latest sustaining release (use X.X.459 rather than X.X.0, for example).
1A public domain name prepared and mapped with your Office 365 tenant. See Create an Office 365 Tenant.
2An entry on your public domain name that points to the fixed IP address of your
Spacevars
0product
SBC Edge.
3

An Office 365 tenant with an E5 license or E3 + Cloud PBX.

4

You must have the Skype for Business Administrator role for your O365 tenant account.

5

A public certificate authority ready to sign a certificate for the

Spacevars
0product
.

Warning
titleImportant
6

A properly configured firewall. See Ports and Protocols at Microsoft Technet.

7

Latest System Release SBC Firmware.

Warning
title
8

Latest System Release SbcComms Firmware.

Warning
9

Microsoft Cloud Connector Edition image 1.4.1 on ASM recovery partition.

...

StepAction
1Login to the WebUI of the
Spacevars
0product
SBC Edge.
2Click the Task tab and then select Operational Status.
3Verify the following:
  • ASM board Status is Up.

  • Service Status is Running.

  • The service version (SBC Communications Service) is the most recent version. If it is not, update it by following the steps in Installing an ASM Package.

...

StepAction
1Login to the WebUI of the
Spacevars
0product
SBC Edge.
2Click the Task tab and then click Change Admin Password.
3

Enter and confirm your new password and then click OK.

...

StepAction
1

Login to the WebUI of the

Spacevars
0product
SBC Edge.

2

Navigate to Tasks  > Setup Cloud Connector Edition.

3

Click the ASM Config tab and configure/verify the Network and IP settings of your ASM.

4

Click Apply. After receiving the activity status as successfully completed, click the Generate CSR tab.

...

StepAction
1Login to the WebUI of the
Spacevars
0product
SBC Edge.
2

Navigate to Tasks > Setup Cloud Connector Edition > Generate CSR.

3

Generate the CSR as shown below with following information. To ensure creating a valid CSR for Cloud Connector Edition usage, please see the section "Certificate requirements" on https://technet.microsoft.com/en-us/library/mt605227.aspx .

4Copy the CSR from the lower pane of the Generate CSR page and save it as a .txt file.
5After the CSR is signed by the Certificate Authority and you receive the PKCS12 Certificate and Key file (i.e.:  certicate.pfx file), continue the wizard by clicking on Import Certificate tab.

...

StepAction
1Login to the WebUI of the
Spacevars
0product
SBC Edge.
2

Navigate to Tasks > Setup Cloud Connector Edition and then click the Import Certificate/Keys tab.

3

Click the Action drop-down list and select the appropriate option:

  • If you generated a Certificate Request (CSR) on the previous step, select the Import X.509 Signed Certificate option,
  • If you prepare your certificate by yourself, select the Import PKCS12 Certificate and Key option. Enter the password for the certificate.
4

Select the relevant certificate file using the Choose File button and then click OK.

5

Select the file by browsing to it using Select File.

6

Click OK.

7

After receiving the activity status as successfully completed, click on Configure CCE tab.

...

StepAction
1Login to the WebUI of the
Spacevars
0product
SBC Edge.
2Open the Tasks tab and click Setup Cloud Connector Edition in the navigation pane.
3Click the Configure CCE tab.
4

Configure all necessary information and then click OK as shown below.

Warning

If the deployment environment consists of multiple-site with a single certificate or a wild card certificate, ensure the CCE Site Name matches your public edge fqdn for this site before proceeding

5After receiving the activity status as successfully completed, click the Prepare CCE tab to continue.

...

StepAction
1Login to the WebUI of the
Spacevars
0product
SBC Edge.
2Open the Tasks tab and click Setup Cloud Connector Edition in the navigation pane.
3Click the Prepare CCE tab.
4

Click the Prepare CCE button, enter the password for Edge Server External Certificate, and then click OK as shown below.

5

To complete the deployment, continue with Manually Configuring the CCE on the ASM.

...

StepAction
1Login to the WebUI of the
Spacevars
0product
SBC Edge.
2Click the Tasks tab, and then click SBC Easy Setup > Easy Config Wizard in the navigation pane.
3

Follow steps 1, 2, and 3 as shown below and then click Finish.

 

4

 Click OK on the next two popups to complete the setup.

5

 The wizard configures the necessary settings for the single

Spacevars
0product
SBC Edge and CCE integration. Relevant configuration items are shown in the Settings tab below:

 

...

StepAction
1Login to the WebUI of the Secondary
Spacevars
0product
SBC Edge.
2Click the Tasks tab and then run the Easy Config.
3

The preceding step will configure the Secondary

Spacevars
0product
SBC Edge with the appropriate configuration items.

4

Add the FQDNs of the Mediation Server and the pool to the host table (pointing out to Mediation Server's IP address) to allow calls to O365.

This completes deployment and integration of the CCE with the

Spacevars
0product
SBC Edge.

 


Basic Call Verification after CCE Deployment and
Spacevars
0product
Integration

...

StepAction
1Login to the WebUI of the
Spacevars
0product
SBC Edge.
2Click the Task tab, and then click Reinitialize in the navigation pane.
3

Select the appropriate image from the drop-down list and then click Apply.

...