Use this page to configure the entries for devices that have registered with the EdgeMarc. When you select a protocol on the page, the page refreshes to show information for the selected protocol: SIP or H.323. Clients can be added and deleted without restarting the system.

Add a client to the specified Clients List:

SIP Clients List

  1. Choose VoIP > Clients List.
  2. (Optional) Enter text in the Client List Filter field to narrow your clients list search and click Apply. To remove the filter to return to a general search, click Clear.

  3. Configure settings using the information in the following table as a guide. When you have finished configuring settings, click Add to make your changes take effect.

    SIP Clients List Parameters

    ItemDescription

    Protocol to Display

    Click SIP to display the SIP clients list.

    Client List Filter

    Narrows a client search for a subset of clients based on text entered into the field. The Apply button applies the currently typed string, and the Clear button removes the specific search filter.

    Clients List

    Icons in the first column of the Clients List allow you to manage list entries depending on the protocol:

    Trash can—Deletes the entry.

    Info—Displays additional information about the client.

    Warning—Client has not responded to audits for the given amount of time.

    Add a SIP Client to the Clients List

    NameEnter the name of the SIP client.
    AddressEnter the IP address of the SIP client.
    Port

    Enter the port used by the SIP client.

    Click Add to add the specified SIP client to the Clients List.

    Manage clients in the Clients List table by clicking the accompanying icons.

    Delete a client by selecting the checkbox next to the client entry and clicking Delete or by clicking the trash can icon.

H.323 Clients List

  1. Choose VoIP > Clients List.
  2. In the Protocol to Display field, click H.323.
  3. (Optional) Enter text in the Client List Filter field to narrow your clients list search and click Apply. To remove the filter to return to a general search, click Clear.

  4. Configure settings using the information in the following table as a guide. When you have finished configuring settings, click Add to make your changes take effect.

    H.323 Clients List Parameters

    ItemDescription

    Protocol to Display

    Click H.323 to display the H.323 clients list.

    Client List Filter

    Narrows a client search for a subset of clients based on text entered into the field. The Apply button applies the currently typed string, and the Clear button removes the specific search filter.

    Clients List

    Icons in the first column of the Clients List allow you to manage list entries depending on the protocol:

    Trash can—Deletes the entry.

    Info—Displays additional information about the client.

    Warning—Client has not responded to audits for the given amount of time.

    H.323 lock—Locks or unlocks the endpoint. A locked endpoint is not automatically deleted by the system (if that feature is enabled).

    Add an H.323 Client to the Clients List

    AddressEnter the static IP address of the H.323 client.
    Q.931 Port

    Enter the Q.931 call signaling port on which the endpoint sends call setup information. Port 1720 is generally used.

    RAS Port

    Enter the Registration, Admission and Status (RAS) port. Port 1719 is generally used.

    AliasEnter the H.323 or E.164 alias for the static client that you are adding.
    Alias Type

    Choose the type of alias entered in the Alias field:

    E.164

    H.323

    Click Add to add the specified H.323 client to the Clients List.

    Manage clients in the Clients List table by clicking the accompanying icons.

    Delete a client by selecting the checkbox next to the client entry and clicking Delete or by clicking the trash can icon.