Configuring for EdgeView at Node-level

The EdgeView contains the EdgeView Service Control Center (SCC). The EdgeView SCC can launch an SBC Edge instance's UI in your internet browser, which allows you to configure, operate, and monitor the instance if the remote UI connection is currently active. For example, you can configure the EdgeView Agent (EVAgent) logging and view the current connection and remote UI status of the EdgeView connection.

With the EdgeView SCC enabled, the SBC Edge sends a SIP signaling group (SG) and port status report and the most recent, highest severity alarm to the EdgeView. The SIP SG and port status report includes information about the SIP SG and port's unique ID, administrative status, and real-time status.

Requirements

To enable the EdgeView SCC, you must configure the EdgeView panel (see the following procedure) according to your SBC Edge:

• SBC 1000/2000 - Configure the EdgeView IP address or FQDN.

• SBC SWe Lite - Configure the EdgeView IP address or FQDN and the EdgeView Management ID.

  Caution

  When you enter the EdgeView Management ID, you must insert a colon every two characters (00:00:00). Otherwise, the SBC SWe Lite cannot connect to the EdgeView.

Configure the SBC Edge for EdgeView at Node-level

Use the following procedure to configure the SBC Edge for EdgeView at the node-level.

1. Access a compatible web browser.
2. In the browser, enter the IP address of the SBC Edge in the URL address bar. The Welcome to Ribbon screen is displayed.
3. Review the Pre-Login message.
4. Enter the administrator User Name and Password configured during initial setup.
5. If the Acknowledge Pre-Login Message checkbox is displayed, click on it to acknowledge you have reviewed the pre-login information above. After initial login, you can enable and disable this checkbox via the Global Security Options. By default, this checkbox is configured as disabled.

6. Click Login. The main screen provides all WebUI functions, including tabbed options, menu tree, device name, and the last login date and time of the system.

7. Select Settings > System > Node-Level Settings.

   SBC 1000/2000 EdgeView in Node-Level Settings Screen - Enabled

   
   Caution

   When you enter the EdgeView Management ID, you must insert a colon every two characters (00:00:00). Otherwise, the SBC SWe Lite cannot connect to the EdgeView.

   SBC SWe Lite EdgeView in Node-Level Settings Screen - Enabled

   

8. Use the following table to configure the EdgeView panel.

   EdgeView Parameters

   Parameter	Description
   EdgeView	Configure this field to enable or disable the EdgeView SCC. No (default) - The EdgeView is disabled. Yes - The EdgeView is enabled.
   EdgeView Address	Configure this field with the IP address or FQDN of the EdgeView. Note: This field applies only when the EdgeView field is set to Yes.
   EdgeView Management ID	Caution: When you enter the EdgeView Management ID, you must insert a colon every two characters (00:00:00). Otherwise, the SBC SWe Lite cannot connect to the EdgeView. Configure this field with the Management ID for the EdgeView. Note: This field applies only to the SBC SWe Lite. The SBC 1000/2000 automatically sends the MAC address to the EdgeView. Note: This field applies only when the EdgeView field is set to Yes.
   EdgeView Connection	The status of the SBC’s connection to the EdgeView. This status may be one of the following: Down Up Note: This field applies only when the EdgeView field is set to Yes.
   EdgeView Tunnel Status	The status of the HTTPS tunnel from the EdgeView to the SBC. This status may be one of the following: Down Up Note: This field applies only when the EdgeView field is set to Yes.
   EdgeView C2E License	The status of the EdgeView Cloud to Edge Licensing on the SBC. This status may be one of the following: False True Note: This field applies only to the SBC SWe Lite. Note: This field applies only when the EdgeView field is set to Yes.

9. Click Apply.