The SBC Easy Config interface includes a built-in, step-by-step configuration wizard that enables quick and easy set up of the SBC in a deployment that includes endpoints for an IP PBX and Microsoft Teams.
Step 1 - Select Scenario
In the WebUI, click the Tasks tab.
In the left navigation pane, go to SBC Easy Setup > Easy Config Wizard.
Make sure the SBC Easy Configuration wizard is running. For details, refer to Using the Easy Configuration Wizard. The Easy Config wizard on the SBC 1000/2000 creates the requested configuration by using the current configuration as a starting point. Existing configuration elements are retained, and the requested endpoint configurationa are added as new configuration elements
- Select the Application (IP PBX↔ Microsoft Teams). Enter the scenario configuration details based on your deployment settings. Once completed, click Next to move to Step 2, or click Cancel to return to the main WebUI screen.
Scenario – Field Definitions
Application
Scenario Description
Type a short description of the IP PBX ↔ Microsoft Teams deployment.
Telephone Country
Emergency Services
Defines the Emergency Services functionality for outgoing numbers. For optimal field display, Emergency Services is not selected in the screens provided as examples. Fields descriptions follow. Options: ELIN Identifier, E911/E112, or None.
The E911 Elin number from the "CompanyName" field configured in Lync location services is used as the authoritative Callback Number for outgoing E911 calls, and is always the preferred configuration. Specifically, the location services configuration for the calling client will take precedence over any Callback Numbers indicated in the Easy Config wizard. For more information, refer to Creating and Modifying Entries to Transformation Tables.
Emergency Callback Number 1
Emergency Callback Number 2
PSAP Number
SIP Sessions (SIP Properties)
Type (IP PBX)
User Type (Microsoft Teams)
Step 2 – Configure PBX and Teams Details for Endpoints
Specify the configuration details based on the User- and Provider-side endpoints used for the deployment. Once completed, click Next to move to Step 3. (Or, click Previous to correct values on the previous screen.)
These fields apply if you selected IP PBX in Step 1 - Select Scenario.
Host
Protocol
Port Number
Use Secondary Server
Signaling/Media Source IP (Microsoft Teams Direct Connect)
Click the arrow to select the external (Internet-facing) IP address of the Microsoft Teams Direct Connect server that handles routing of messages for signaling and media.
Outbound NAT Traversal
Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid selections:
Enable: Network Address Translation is used for the NAT device's Public IP address.
Disable: Network Address Translation address translation is not used.
NOTE: This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge for NAT Traversal.
Public IP Address
Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable.
Apply ACL
Specifies whether an ACL (Access Control List) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP.
Valid selection:
True: Applies the ACL
False: Does not apply the ACL.
For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists.
Server Pool Host 1
Hard-coded FQDN for the location of the server list for Server Pool Host 1: sip.pstnhub.microsoft.com
Server Pool Host 2
Hard-coded FQDN for the location of the server list for Server Pool Host 2: sip2.pstnhub.microsoft.com
Server Pool Host 3
Hard-coded FQDN for the location of the server list for Server Pool Host 3: sip3.pstnhub.microsoft.com
Federated FQDN/IP
Modified: for 9.0.7
Modified: for 9.0.7
Hard-coded federated FQDN/IP for use with Microsoft Teams Direct Routing:
- 52.112.0.0, with netmask 255.252.0.0
- 52.120.0.0, with netmask 255.252.0.0
For more information, refer to https://docs.microsoft.com/en-us/microsoftteams/direct-routing-plan#microsoft-365-office-365-and-office-365-gcc-environments
Protocol
Hard-coded value for protocol used with federated FQDN: TLS
Port Number
Hard-coded value for the port used for TLS: 5061
Step 3 – Confirm and Submit Configuration
This step displays a summary of the the configuration items from Step 1 and Step 2. Click Finish.