This page contains information that is re-used in the Sonus SBC 1000/2000 documentation.

Start with Getting Started Notice:

 

 

This section assumes that the Sonus SBC 1000/2000 system is already physically installed and running. If your Sonus SBC 1000/2000 system is not running, go to the Sonus SBC 1000/2000 Installation and Upgrade Guide and follow the setup instructions.

Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=getting-started-redirect|nopanel=true}

Do Not Connect Admin Port to Network

Do not connect the Admin port to your Ethernet network, as this may cause an IP address conflict.

Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=do-not-connect-mgmt|nopanel=true}

Sonus SBC 1000/2000 Hardware Service Warning

Review and follow the Sonus SBC 1000/2000 Safety Precautions before performing any service on the Sonus SBC 1000/2000 system.

Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=hw-service-warning|nopanel=true}

Error rendering macro 'excerpt-include'

No link could be created for '_release_number'.

Interface Card Hotswap Warning

Warning for

Error rendering macro 'excerpt-include'

No link could be created for '_release_number'.

that hot swap of interface cards is not supported.

 

 

 

 

 

 

You must power down the Sonus SBC 1000/2000 system before installing or removing Interface Cards. Hot swapping of Interface Cards is not supported in

Error rendering macro 'excerpt-include'

No link could be created for '_release_number'.

.

 

 

 

 

 

 

 

Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=warn-icard-hotswap|nopanel=true}

Error rendering macro 'excerpt-include'

No link could be created for '_release_number'.

Interface Card Hot Swap LED Warning

Warning for

Error rendering macro 'excerpt-include'

No link could be created for '_release_number'.

that hot swap of interface cards is not supported.

 

Do not remove the Interface Card while Hot Swap LED is ON. When the Hot Swap LED is on, Sonus SBC 1000/2000 is in the process of shutting down system resources associated with the interface card.

Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=warn-hotswap-led|nopanel=true}

Sonus SBC 1000/2000 1.2 Connecting Two or More Ports on the Same Bridge to the Same Switch Warning

 

Do not connect the two or more Sonus SBC 1000/2000 Ethernet ports that are mapped to the same Bridge to the same switch, as this can cause a network packet flood.

Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=warn-same-bridge|nopanel=true}

Generic Call Outage Warning

Performing this operation disrupts call services and should only be performed during a planned service outage window.

Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=warn-call-outage|nopanel=true}

Hardware Setup: Do Not Connect Cables Yet

 

DO NOT INSTALL ETHERSonus OR TELECOM CABLES. You must complete the Initial Configuration before connecting the Sonus SBC 1000/2000 system to your network.

Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=warn-no-com-cables|nopanel=true}

Domain Join May Impact ASM servers Warning

 

Joining the ASM to a domain may impact the availability of services on the ASM such as Remote Desktop (1,2,3) by denying access to these services through security policies. Before joining the ASM server to a domain, you should review your Domain's default security policy and Group policies to verify that required services and access are allowed. You may need to create exceptions for the ASM host to allow the use of services such as Remote Desktop.

Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=warn-asm-domain-join|nopanel=true}

Do not remove chassis cover warning

Do not remove the top panel of the Sonus SBC 1000/2000 chassis. Operating the Sonus SBC 1000/2000 system with the top panel removed will cause hardware components to overheat and fail. Unauthorized removal of the top panel will void your product warranty and service agreement.

Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=warn-cover-removal|nopanel=true}

Do not operate Sonus SBC 1000/2000 with chassis cover removed warning

Do not attempt to operate Sonus SBC 1000/2000 with the top chassis panel removed as this interferes with the cooling design of the system. Operating the Sonus SBC 1000/2000 system with the cover removed will cause hardware components to overheat and fail.

Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=warn-operating-with-cover-removed|nopanel=true}

Software downloads

To obtain software updates for Sonus SBC 1000/2000 and other Sonus products, visit the Sonus software downloads site.

Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=info-software-downloads|nopanel=true}

CAS R2 Signaling not supported in Sonus SBC 1000/2000 version 2.0

CAS R2 Signaling is not supported in version 2.0.0. This feature is scheduled for version 2.0.1.

Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=cas-r2-not-supported|nopanel=true}

 

SHA2-256 Certificate Usage Caution

SHA2-256 Certificate Compatibility

SHA2-256 CA Certificates may be used for the SBA, SBC, and Lync 2013 Servers. However, the certificates on ALL devices must be SHA2-256. Lync 2010 requires that all devices employ either ALL SHA1 or ALL SHA2 Certificates. 
 
Therefore, if any device (SBC, SBA, or Lync Server) is upgraded to SHA2-256, then all other devices must be upgraded as well. 
 
For more information see the Microsoft SHA1 Deprecation Policy for more information.

Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=sha2-256-certificate-compatibility|nopanel=true}

 

  • No labels