In this section:
Related Pages:
In the left navigation pane, go to System > Software Management > Application Partitions.
Partitions Table
Click the Upload Software link located on the top right hand side of the pane.
Under Select File, click the Browse button and select the SBC SWe Lite file you previously saved.
On the partition page, verify the Last Upload Status associated with the inactive partition is listed as Success.
At this stage, the inactive partition is upgraded to the new software without rebooting the SBC SWe Lite and without interrupting active call services. To set as the active partition, refer to Setting the Active Partition.
Step | Action |
---|---|
1 | You must clear your web browser cache before you log in to the SBC SWe Lite |
2 | Perform a backup of your data on the new SBC SWe Lite version. Ribbon recommends that you rename the backup filename to indicate the current software version and build number. |
3 | Ensure there are no new alarms generated after the upgrade. In the event of finding new alarms, address what is causing them. |