Following an SBC SWe Lite upgrade, this procedure describes how to switch partitions on the SBC SWe Lite. For example, if you are unable to access the WebUI following an upgrade, these instructions detail how to switch the partition to a previous firmware version at the hypervisor level. These instructions are applicable to an SBC SWe Lite that has been upgraded via:
Switch partitions on an SBC SWe Lite as follows:
Access the partition menu.
GNU GRUB - Hypervisor Console
Use the menu keys to select the last known working firmware version (USBC Partition1 or USBC Partition2).
Press Enter.