Overview - What is a SIP Server Table?

SIP Server Tables contain information about the SIP devices connected to the SBC Edge. The entries in the tables provide information about the IP Addresses, ports, and protocols used to communicate with each server. The Table Entries also contain links to counters that are useful for troubleshooting.

Refer to Creating and Modifying Entries in SIP Server Tables for configuration.

Failover SIP Registration

Failover SIP registration is for redundant SIP servers within a SIP Server Table (either multiple entries, or DNS SRV that returns multiple servers). If the SBC registration to the primary SIP Server fails, becomes unreachable, or the registrations expires and a re-register fails, the SBC attempts to register to the secondary SIP Server and continues calls to the server. Failover SIP registration is completed according to the Priority order of the SIP Servers. Fallback will occur if the primary SIP Server becomes reachable again.

Failover to another SIP server will also occur if the SBC receives the following SIP response code from an active SIP server for calls: 4xx, 5xx, or 6xx.

 

When Load Balancing is configured as Priority: Register Active Only in the SIP Signaling Group, a SIP Failover Cause Code should be selected under Mapping Tables in the SIP Signaling Group. If a SIP Failover Cause Code is selected, Failover occurs for timeout cases and failure response codes.  If a SIP Failover Cause Code is not selected, Failover occurs only for timeout cases and not for failure response codes. 

Refer to Creating and Modifying Entries in SIP Server Tables for configuring Failover SIP Registration.

Working with SIP Server Tables

  1. In the WebUI, click the Settings tab.
  2. In the left navigation pane, go to SIP > SIP Server Tables.

    SIP Server Tables

     

To view a SIP Server Table's properties:

  1. Click the pop-up icon () next to the entry you want to view.
  2. When you are finished, close the window.

To modify a SIP Server Table:

  1. Click the expand () Icon next to the entry you wish to modify.
  2. Modify the table's Description as desired
  3. Click OK.

To add a SIP Server Table:

  1. Click the Create ( ) icon.

    Create SIP Server Table

  2. Enter a descriptive name in the Description text field.
  3. Click OK.

To delete an entry, select the checkbox next to the entry and then click the Delete () icon.

Creating and Modifying Entries in SIP Server Tables