To create or modify an Entry to a Remote Authorization Table:

  1. In the WebUI, click the Settings tab.
  2. In the left navigation pane, go to SIP > Remote Authorization Tables > Entry.

    SIP Remote Authorization Tables

Modifying an Entry to a Remote Authorization Table

  1. Click the expand () Icon next to the entry you wish to modify.
  2. Edit the entry properties as required, see details below.

Resequencing an Entry in a Remote Authorization Table

  1. Click the Resequence icon ( ) at the top of the table.
  2. Select the row(s) you want to move.
  3. Click the Move Selected Rows Up ( ) or Move Selected Rows Down ( ) icon to reposition the row(s) in the table.
  4. Click Apply.

Creating an Entry to a Remote Authorization Table

  1. Click the Create Remote Authorization ( ) icon.
  2. Configure the fields. See below for valid field entries.
  3. Click Apply.

    Create Remote Authorization Entry


Remote Authorization Entry - Field Definitions

Realm

Specifies a realm which is matched to an incoming challenges realm. Valid entry: maximum length = 512.

Authentication ID

Specifies a user name to use in response to a challenge, also known as Authentication ID. Valid entry: maximum length = 64.

Enter Password

The password to use with Authentication ID. Valid entry: maximum length = 64. 

Confirm Password

Re-enter the password to use with Authentication ID (the same password you entered in the Enter Password field, maximum length = 64). 

From URI User Match

Sets the matching criteria for which field the incoming From header URI User value will be matched against. Valid entry: Authentication ID or Regex. If Regex is selected, the Match Regex field is displayed.

Match Regex

The value entered Regex matches against the incoming From Header (user name, AOR field). Valid entry: numeric, 0 - 128. This field is visible only when the From URI User Match field is configured as Regex.