To create an Entry in a Static ARP Table:

  1. In the WebUI, click the Settings tab.
  2. In the left navigation pane, go to Protocols > IP > Static ARP Tables. See below for examples for both SBC 1000/2000 and SBC SWe Lite.

    Static ARP Table - SBC 1000/2000

    Static ARP Table - SBC SWe Lite

     

Creating an Entry in a Static ARP Table

  1. Click the Create Static ARP Table Entry ( ) icon at the top of the Static ARP Table page. See below for examples for both SBC 1000/2000 and SBC SWe Lite.

    Create Static ARP Entry - SBC 1000/2000

    Create Static ARP Entry - SWe Lite

    The IP address (and subsequent MAC address) must belong to a device which is a member of a subnet defined for the SBC.


  2. Enter an IP Address (IPv4 only) to be mapped.
  3. Enter a MAC Address to be mapped.
  4. From the Interface Name drop down list, select the applicable interface (this field is available only in the SWe Lite).
  5. Click OK.