Deploying an SBA Using REST

Table of Contents

Prerequisites

For prerequisites, refer to Deploying the Survivable Branch Appliance.

Log into SBC REST API

The action below defines the login resource used to log into the Ribbon SBC REST API. This is the first request that needs to be made before you can access any of the other REST Resources on the Ribbon SBC 1000/2000 system. Refer to Resource - login.

### Allow self Sign Cert
add-type @"
    using System.Net;
    using System.Security.Cryptography.X509Certificates;
     
    public class IDontCarePolicy : ICertificatePolicy {
        public IDontCarePolicy() {}
        public bool CheckValidationResult(
            ServicePoint sPoint, X509Certificate cert,
            WebRequest wRequest, int certProb) {
            return true;
        }
    }
"@
[System.Net.ServicePointManager]::CertificatePolicy = new-object IDontCarePolicy
                                             
### Login
$BodyValue = "Username=restuser&Password=restpass"
 
$url = "https://134.56.226.215/rest/login"
$Result = Invoke-RestMethod -Uri $url -Method Post -Body $BodyValue -SessionVariable ps

Update the recovery partition with a new ASM image (Optional)

The action below enables you to load new software into the Recovery partition of the ASM through USB. Refer to Resource - sbaconfig.

Query

$url = "https://134.56.226.215/rest/sbaconfig?action=asmupdaterecoverypartition"
Invoke-RestMethod -Uri $url -Method POST -Body "" -WebSession $ps

Response

<?xml version="1.0"?>
<root>
 <status>
  <http_code>200</http_code>
 </status>
</root>

Action end on status

$url = "https://134.56.226.215/rest/sbaactionstatus"
Invoke-RestMethod -Uri $url -Method GET -WebSession $MyPs
 
<?xml version="1.0"?>
<root>
 <status>
  <http_code>200</http_code>
 </status>
 <sbaactionstatus href="https://134.56.226.217/rest/sbaactionstatus">
  <rt_Success>1</rt_Success>
  <rt_ActionType>28</rt_ActionType>
  <rt_PercentComplete>100</rt_PercentComplete>
  <rt_Duration>271</rt_Duration>
  <rt_StatusText>Image installation complete. If you need to apply this image, please remove the USB flash drive and perform the 'Reinitialize' action now</rt_StatusText>
  <rt_AllActionsBitmap>127</rt_AllActionsBitmap>
  <rt_ActionStartTime>0</rt_ActionStartTime>
 </sbaactionstatus>
</root>

Re-initialize the ASM (Optional)

Retrieve available ASM images

The action below retrieves the factory image information available on ASM. Refer to Resource - asmfactoryimage.

Query

$url = "https://134.56.226.215/rest/asmfactoryimage"
Invoke-RestMethod -Uri $url -Method GET  -WebSession $ps

Response

<?xml version="1.0"?>
<root>
 <status>
  <http_code>200</http_code>
</status>
 <asmfactoryimage_list count="3">
  <asmfactoryimage_pk id="1" href="https://134.56.226.215/rest/asmfactoryimage/1"/>
  <asmfactoryimage_pk id="3" href="https://134.56.226.215/rest/asmfactoryimage/3"/>
  <asmfactoryimage_pk id="2" href="https://134.56.226.215/rest/asmfactoryimage/2"/>
 </asmfactoryimage_list>
</root>

Command to get the ASM image details based on the ID:

The action below retrieves the detailed factory image information on ASM. Refer to Resource - asmfactoryimage.

Query

$url = "https://134.56.226.215/rest/asmfactoryimage/1"
Invoke-RestMethod -Uri $url -Method GET  -WebSession $ps

$url = "https://134.56.226.215/rest/asmfactoryimage/2"
Invoke-RestMethod -Uri $url -Method GET  -WebSession $ps

$url = "https://134.56.226.215/rest/asmfactoryimage/3"
Invoke-RestMethod -Uri $url -Method GET  -WebSession $ps

Response

<?xml version="1.0"?>
<root>
 <status>
  <http_code>200</http_code>
</status>
 <asmfactoryimage id="1" href="https://134.56.226.215/rest/asmfactoryimage/1">
  <Description>Lync 2013 SBA with SBC Comms 2.2.0b175</Description>
  <ImageDirectoryName>2013-05-02_10-08-26</ImageDirectoryName>
  <IsDefault>1</IsDefault>
 </asmfactoryimage>
</root>

Command to apply a new ASM image based on the ASM Image details

The action below re-initializes the ASM and puts it in default factory state. Refer to Resource - sbaconfig.

Query

##########
$dirNam = "2013-05-02_10-08-26"
##########

$BodyValue = "dirName=$dirName"
$url = "https://134.56.226.215/rest/sbaconfig?action=asmreinitialize"
Invoke-RestMethod -Uri $url -Method POST -Body $BodyValue -WebSession $ps

Response

<?xml version="1.0"?>
<root>
 <status>
  <http_code>200</http_code>
 </status>
</root>

Action end on status

$url = "https://134.56.226.215/rest/sbaactionstatus"
Invoke-RestMethod -Uri $url -Method GET -WebSession $MyPs
 
<?xml version="1.0"?>
<root>
 <status>
  <http_code>200</http_code>
 </status>
 <sbaactionstatus href="https://134.56.226.215/rest/sbaactionstatus">
  <rt_Success>1</rt_Success>
  <rt_ActionType>9</rt_ActionType>
  <rt_PercentComplete>100</rt_PercentComplete>
  <rt_Duration>0</rt_Duration>
  <rt_StatusText>Re-initialization complete</rt_StatusText>
  <rt_AllActionsBitmap>0</rt_AllActionsBitmap>
  <rt_ActionStartTime>0</rt_ActionStartTime>
 </sbaactionstatus>
</root>

Configuring the ASM IP Settings

The action below modifies the SBA configuration resource. This is the first step in setting up the SBA. Refer to Resource - sbaconfig.

Query

$DHCPEnabled = 0
$ipv4Address = "134.56.226.214"
$ipv4Netmask = "255.255.255.0"
$ipv4Gateway = "134.56.226.5"
$RemoteDesktopEnabled = 1
$DNSServer1 = "134.56.227.32"
$DNSServer2 = "134.56.226.75"
$AclEnable = 1
##########

$BodyValue = "DHCPEnabled=$DHCPEnabled&ipv4Address=$ipv4Address&ipv4Netmask=$ipv4Netmask&ipv4Gateway=$ipv4Gateway&RemoteDesktopEnabled=$RemoteDesktopEnabled&DNSServer1=$DNSServer1&DNSServer2=$DNSServer2&AclEnable=$AclEnable"
$url = "https://134.56.226.215/rest/sbaconfig"
Invoke-RestMethod -Uri $url -Method POST -Body $BodyValue -WebSession $ps

Response

<?xml version="1.0"?>
<root>
 <status>
  <http_code>200</http_code>
 </status>
</root>

Action end on status

$url = "https://134.56.226.215/rest/sbaactionstatus"
Invoke-RestMethod -Uri $url -Method GET -WebSession $MyPs
 
<?xml version="1.0"?>
<root>
 <status>
  <http_code>200</http_code>
 </status>
 <sbaactionstatus href="https://134.56.226.215/rest/sbaactionstatus">
  <rt_Success>1</rt_Success>
  <rt_ActionType>31</rt_ActionType>
  <rt_PercentComplete>100</rt_PercentComplete>
  <rt_Duration>0</rt_Duration>
  <rt_StatusText>ASM Configuration successfully applied</rt_StatusText>
  <rt_AllActionsBitmap>0</rt_AllActionsBitmap>
  <rt_ActionStartTime>0</rt_ActionStartTime>
 </sbaactionstatus>
</root>

Joining the ASM to the domain

The action below configures the domain in which the SBA will connect. Refer to Resource - sbaconfig.

Query

$hostName = "SBA2010-226-214"
$domainName = "UX2013.COM"
$userName = "UX2013\administrator"
$userPassword = "Password1"
##########

$BodyValue = "hostName=$hostName&domainName=$domainName&userName=$userName&userPassword=$userPassword"
$url = "https://134.56.226.215/rest/sbaconfig?action=joindomain"
Invoke-RestMethod -Uri $url -Method POST -Body $BodyValue -WebSession $ps

Response

<?xml version="1.0"?>
<root>
 <status>
  <http_code>200</http_code>
 </status>
</root>

Action end on status

$url = "https://134.56.226.215/rest/sbaactionstatus"
Invoke-RestMethod -Uri $url -Method GET -WebSession $MyPs
 
<?xml version="1.0"?>
<root>
 <status>
  <http_code>200</http_code>
 </status>
 <sbaactionstatus href="https://134.56.226.215/rest/sbaactionstatus">
  <rt_Success>1</rt_Success>
  <rt_ActionType>4</rt_ActionType>
  <rt_PercentComplete>100</rt_PercentComplete>
  <rt_Duration>107</rt_Duration>
  <rt_StatusText>join complete</rt_StatusText>
  <rt_AllActionsBitmap>1</rt_AllActionsBitmap>
  <rt_ActionStartTime>0</rt_ActionStartTime>
 </sbaactionstatus>
</root>

Deploying the SBA

Command to prepare the SBA bits

The action below performs a number of low-level steps necessary to deploy the ASM packages. Refer to Resource - sbaconfig.

Query

$url = "https://134.56.226.215/rest/sbaconfig?action=deploy"
Invoke-RestMethod -Uri $url -Method POST -Body "" -WebSession $ps

Response

<?xml version="1.0"?>
<root>
 <status>
  <http_code>200</http_code>
 </status>
</root>

Action end on status

$url = "https://134.56.226.215/rest/sbaactionstatus"
Invoke-RestMethod -Uri $url -Method GET -WebSession $MyPs
 
<?xml version="1.0"?>
<root>
 <status>
  <http_code>200</http_code>
 </status>
 <sbaactionstatus href="https://134.56.226.215/rest/sbaactionstatus">
  <rt_Success>1</rt_Success>
  <rt_ActionType>22</rt_ActionType>
  <rt_PercentComplete>100</rt_PercentComplete>
  <rt_Duration>1502</rt_Duration>
  <rt_StatusText>Complete</rt_StatusText>
  <rt_AllActionsBitmap>3</rt_AllActionsBitmap>
  <rt_ActionStartTime>0</rt_ActionStartTime>
 </sbaactionstatus>
</root>

Command to start the replication with Lync Server

The action below causes the Communications Server (CS) to begin configuration replication with the domain. This is a necessary step for bringing up the CS configuration, as well as receiving updates from the domain. Refer to Resource - sbaconfig.

Query

$url = "https://134.56.226.215/rest/sbaconfig?action=startreplication"
Invoke-RestMethod -Uri $url -Method POST -Body "" -WebSession $ps

Response

<?xml version="1.0"?>
<root>
 <status>
  <http_code>200</http_code>
 </status>
</root>

Action end on status

$url = "https://134.56.226.215/rest/sbaactionstatus"
Invoke-RestMethod -Uri $url -Method GET -WebSession $MyPs
 
<?xml version="1.0"?>
<root>
 <status>
  <http_code>200</http_code>
 </status>
 <sbaactionstatus href="https://134.56.226.215/rest/sbaactionstatus">
  <rt_Success>1</rt_Success>
  <rt_ActionType>20</rt_ActionType>
  <rt_PercentComplete>100</rt_PercentComplete>
  <rt_Duration>268</rt_Duration>
  <rt_StatusText>replication started</rt_StatusText>
  <rt_AllActionsBitmap>7</rt_AllActionsBitmap>
  <rt_ActionStartTime>0</rt_ActionStartTime>
 </sbaactionstatus>
</root>

Command to activate SBA with Lync Server

The action below activates the Communications Server (CS) and must be done before the certificates are installed. Refer to Resource - sbaconfig.

Query

$url = "https://134.56.226.215/rest/sbaconfig?action=activatewithlync"
Invoke-RestMethod -Uri $url -Method POST -Body "" -WebSession $ps

Response

<?xml version="1.0"?>
<root>
 <status>
  <http_code>200</http_code>
 </status>
</root>

Action end on status

$url = "https://134.56.226.215/rest/sbaactionstatus"
Invoke-RestMethod -Uri $url -Method GET -WebSession $MyPs
 
<?xml version="1.0"?>
<root>
 <status>
  <http_code>200</http_code>
 </status>
 <sbaactionstatus href="https://134.56.226.215/rest/sbaactionstatus">
  <rt_Success>1</rt_Success>
  <rt_ActionType>7</rt_ActionType>
  <rt_PercentComplete>100</rt_PercentComplete>
  <rt_Duration>12</rt_Duration>
  <rt_StatusText>Activation Complete</rt_StatusText>
  <rt_AllActionsBitmap>15</rt_AllActionsBitmap>
  <rt_ActionStartTime>0</rt_ActionStartTime>
 </sbaactionstatus>
</root>

Generate and Import an SBA Certificate

This resource defines the generatecsr action on the SBA CSR Resource. It returns the CSR as the response. It is also able to auto-submit the request. Refer to Resource - sbacsr.

Query

$CA = "RDC.UX2013.COM\UX2013-RDC-CA"
$CALogin = "ux2013\Administrator"
$CAPassword = "Password1"
$Domain = "ux2013.com"
$Email = "Adrien@ux2013.com"
$Organization = "RIBBON"
$OU = "AUTOMAITON"
$City = "FREMONT"
$State = "CA"
$Country = "US"
$CsrTemplate = "WebServer"
$KeySize = 2048
##########

$BodyValue = "CA=$CA&CALogin=$CALogin&CAPassword=$CAPassword&Domain=$Domain&Email=$Email&Organization=$Organization&OU=$OU&City=$City&State=$State&Country=$Country&CsrTemplate=$CsrTemplate&KeySize=$KeySize"
$url = "https://134.56.226.215/rest/sbacsr?action=generatecsr"
$Result = Invoke-RestMethod -Uri $url -Method POST -Body $BodyValue -WebSession $ps

Response

<?xml version="1.0"?>
<root>
 <status>
  <http_code>200</http_code>
 </status>
</root>

Action end on status

$url = "https://134.56.226.215/rest/sbaactionstatus"
Invoke-RestMethod -Uri $url -Method GET -WebSession $MyPs
 
<?xml version="1.0"?>
<root>
 <status>
  <http_code>200</http_code>
 </status>
 <sbaactionstatus href="https://134.56.226.215/rest/sbaactionstatus">
  <rt_Success>1</rt_Success>
  <rt_ActionType>14</rt_ActionType>
  <rt_PercentComplete>100</rt_PercentComplete>
  <rt_Duration>11</rt_Duration>
  <rt_StatusText>Certificate successfully applied</rt_StatusText>
  <rt_AllActionsBitmap>31</rt_AllActionsBitmap>
  <rt_ActionStartTime>0</rt_ActionStartTime>
 </sbaactionstatus>
</root>

Starting the SBA Services

The action below starts the network daemons for the services indicated. Refer to Resource - sbaconfig.

Query

$BodyValue = "serviceName=16"

$url = "https://134.56.226.215/rest/sbaconfig?action=enablesvc"
Invoke-RestMethod -Uri $url -Method POST -Body $BodyValue -WebSession $ps

Response

<?xml version="1.0"?><root>
 <status>
  <http_code>200</http_code>
 </status>
</root>

Action end on status

$url = "https://134.56.226.215/rest/sbaactionstatus"
Invoke-RestMethod -Uri $url -Method GET -WebSession $MyPs
 
<?xml version="1.0"?>
<root>
 <status>
  <http_code>200</http_code>
 </status>
 <sbaactionstatus href="https://134.56.226.215/rest/sbaactionstatus">
  <rt_Success>1</rt_Success>
  <rt_ActionType>1</rt_ActionType>
  <rt_PercentComplete>100</rt_PercentComplete>
  <rt_Duration>139</rt_Duration>
  <rt_StatusText>Services successfully started (16)</rt_StatusText>
  <rt_AllActionsBitmap>63</rt_AllActionsBitmap>
  <rt_ActionStartTime>0</rt_ActionStartTime>
 </sbaactionstatus>
</root>

Applying an SBA Security Template

The action below applies a security template to the node to prevent unauthorized changes from being made to the system. Refer to Resource - sbaconfig.

Query

$BodyValue = "templateType=0&sbaInstallFilename=0"

$url = "https://134.56.226.215/rest/sbaconfig?action=applysectemplate"
$Result = Invoke-RestMethod -Uri $url -Method POST -Body $BodyValue -WebSession $ps

Response

<?xml version="1.0"?><root>
 <status>
  <http_code>200</http_code>
 </status>
</root>

Action end on status

$url = "https://134.56.226.215/rest/sbaactionstatus"
Invoke-RestMethod -Uri $url -Method GET -WebSession $MyPs
 
<?xml version="1.0"?>
<root>
 <status>
  <http_code>200</http_code>
 </status>
 <sbaactionstatus href="https://134.56.226.215/rest/sbaactionstatus">
  <rt_Success>1</rt_Success>
  <rt_ActionType>21</rt_ActionType>
  <rt_PercentComplete>100</rt_PercentComplete>
  <rt_Duration>1</rt_Duration>
  <rt_StatusText>Security Template Applied</rt_StatusText>
  <rt_AllActionsBitmap>127</rt_AllActionsBitmap>
  <rt_ActionStartTime>0</rt_ActionStartTime>
 </sbaactionstatus>
</root>

Checking the SBA Status

To confirm that all the SBA services are running properly, refer to Viewing the SBA Operational Status to check the status.

$url = "https://134.56.226.215/rest/asmfactoryimage/1"
$Result = Invoke-RestMethod -Uri $url -Method GET  -WebSession $ps

SBA Login/Configuration/Status - Example

### 1. Login
$NodeUrl = "134.56.226.215"
$NodeLogin = "restuser"
$NodePassword = "restpass"
 
### 2. Re-initialize the ASM
$LyncVersion = "Lync 2013"
 
### 3. Configuring the ASM IP Settings
$DHCPEnabled = 0
$ipv4Address = "134.56.226.214"
$ipv4Netmask = "255.255.255.0"
$ipv4Gateway = "134.56.226.5"
$RemoteDesktopEnabled = 1
$DNSServer1 = "134.56.227.32"
$DNSServer2 = "134.56.226.75"
$AclEnable = 1
 
### 4. Update SbcComms
$SbcCommsFilePath = "c:\setup.msi"
 
### 5. Joining the ASM to a Domain
$hostName = "AUTO-SBA226-214"
$domainName = "UX2013.COM"
$userName = "UX2013\administrator"
$userPassword = "Password1"

### 7. Generate and Import an SBA Certificate
$CA = "RDC.UX2013.COM\UX2013-RDC-CA"
$CALogin = "ux2013\Administrator"
$CAPassword = "Password1"
$Domain = "ux2013.com"
$Email = "Adrien@ux2013.com"
$Organization = "RIBBON"
$OU = "AUTOMAITON"
$City = "FREMONT"
$State = "CA"
$Country = "US"
$CsrTemplate = "WebServer"
$KeySize = 2048
 
### 10. Install the Latest Lync SBA Cumulative Update (CU)
$CUFilePath = "c:\CU.pkg"
 
###################################
#### Define some function Helper
###################################

### Re-initialize the ASM with the correct ASM Image
function SearchImageDirectoryName {
    Param($MyLyncVersion, $MyNodeUrl, $MyPs)
    $url = "https://$MyNodeUrl/rest/asmfactoryimage"
    $ImageCmd = Invoke-RestMethod -Uri $url -Method GET  -WebSession $MyPs
    if ((BasicHandler $ImageCmd) -ne 1) {
        write-host "Failed on SearchImageDirectoryName: "(BasicHandler $ImageCmd)
        return 0
    }
    [xml]$ImageCmdXml= $ImageCmd.Substring(5)
    foreach ($image in $ImageCmdXml.root.asmfactoryimage_list.asmfactoryimage_pk.href) {
        $url = $image
        $ImageDetail = Invoke-RestMethod -Uri $url -Method GET -WebSession $MyPs
        [xml]$ImageDetailXml= $ImageDetail.Substring(5)
        if($ImageDetailXml.root.asmfactoryimage.Description.contains($MyLyncVersion)) { return $ImageDetailXml.root.asmfactoryimage.ImageDirectoryName}
    }
    return 0
}

### Return the result of the request
Function BasicHandler {
    Param($MyResult)

[xml]$XmlResult = $MyResult.Substring(5)
    if($XmlResult.root.status.http_code.contains("200")) {
        return 1
    } else {
        return "Error Code:<"+$XmlResult.root.status.app_status.app_status_entry.code+"> Param:<"+$XmlResult.root.status.app_status.app_status_entry.params+">"
    }
}

### Return the result of the request
Function BasicHandlerCurl {
    Param($MyResult)
    $FiltredMyResult = ""
    foreach ($line in $MyResult) {
        if ($line.StartsWith("<")) {
            $FiltredMyResult += $line
        } elseif ($line.StartsWith(" ")) {
            $FiltredMyResult += $line
        }
    }
    [xml]$XmlResult = $FiltredMyResult
    if($XmlResult.root.status.http_code.contains("200")) {
        return 1
    } else {
        return "Error Code:<"+$XmlResult.root.status.app_status.app_status_entry.code+"> Param:<"+$XmlResult.root.status.app_status.app_status_entry.params+">"
    }
}

### Return the result of the last action
function LookCompletionStatus {
    Param($MyNodeUrl, $MyPs)
    $url = "https://$MyNodeUrl/rest/sbaactionstatus"
    $timer = 0
    while($timer -lt 3600) {
        $Result = Invoke-RestMethod -Uri $url -Method GET -WebSession $MyPs
        if ((BasicHandler $Result) -ne 1) { return 0}
        [xml]$FinalResult= $Result.Substring(5)
        if ($FinalResult.root.sbaactionstatus.rt_Success -eq 1) {
            if ($FinalResult.root.sbaactionstatus.rt_PercentComplete -eq 100) { return 1 }
        } else {
            return $FinalResult.root.sbaactionstatus.rt_StatusText
        }
        sleep 10
        $timer += 10
        write-host "- "$FinalResult.root.sbaactionstatus.rt_PercentComplete"% "$FinalResult.root.sbaactionstatus.rt_StatusText
    }
    return "Timout out"
}
 
###################################
#### Main Code
###################################
 
$ActualStep = 0

### 1. Login
$ActualStep = "1. Login"
add-type @"
    using System.Net;
    using System.Security.Cryptography.X509Certificates;
      
    public class IDontCarePolicy : ICertificatePolicy {
        public IDontCarePolicy() {}
        public bool CheckValidationResult(
            ServicePoint sPoint, X509Certificate cert,
            WebRequest wRequest, int certProb) {
            return true;
        }
    }
"@
[System.Net.ServicePointManager]::CertificatePolicy = new-object IDontCarePolicy                                          
 
$BodyValue = "Username=$NodeLogin&Password=$NodePassword"
$url = "https://$NodeUrl/rest/login"
$Result = Invoke-RestMethod -Uri $url -Method Post -Body $BodyValue -SessionVariable ps
if ((BasicHandler $Result) -ne 1) {
    write-host "Failed on "$ActualStep": "(BasicHandler $Result)
    return 0
}

### 2. Re-initialize the ASM
$ActualStep = "2. Re-initialize the ASM"
$dirName = SearchImageDirectoryName $LyncVersion $NodeUrl $ps
if ($dirName -eq 0) {
    write-host $ActualStep" Failed: Unable to find the proper ASM Image"
    return 0
}
$BodyValue = "dirName=$dirName"
$url = "https://$NodeUrl/rest/sbaconfig?action=asmreinitialize"
$Result = Invoke-RestMethod -Uri $url -Method POST -Body $BodyValue -WebSession $ps
if ((BasicHandler $Result) -ne 1) {
    write-host $ActualStep" Failed: "(BasicHandler $Result)
    return 0
}
if ((LookCompletionStatus $NodeUrl $ps) -ne 1) {
    write-host $ActualStep" Failed: "(BasicHandler $Result)
    return 0
}

### 3. Configuring the ASM IP Settings
$ActualStep = "3. Configuring the ASM IP Settings"
$BodyValue = "DHCPEnabled=$DHCPEnabled&ipv4Address=$ipv4Address&ipv4Netmask=$ipv4Netmask&ipv4Gateway=$ipv4Gateway&RemoteDesktopEnabled=$RemoteDesktopEnabled&DNSServer1=$DNSServer1&DNSServer2=$DNSServer2&AclEnable=$AclEnable"
$url = "https://$NodeUrl/rest/sbaconfig"
$Result = Invoke-RestMethod -Uri $url -Method POST -Body $BodyValue -WebSession $ps
if ((BasicHandler $Result) -ne 1) {
    write-host $ActualStep" Failed: "(BasicHandler $Result)
    return 0
}
if ((LookCompletionStatus $NodeUrl $ps) -ne 1) {
    write-host $ActualStep" Failed: "(BasicHandler $Result)
    return 0
}
 
### 4. Update SbcComms
 
### 5. Joining the ASM to a Domain
$ActualStep = "5. Joining the ASM to a Domain"
$BodyValue = "hostName=$hostName&domainName=$domainName&userName=$userName&userPassword=$userPassword"
$url = "https://$NodeUrl/rest/sbaconfig?action=joindomain"
$Result = Invoke-RestMethod -Uri $url -Method POST -Body $BodyValue -WebSession $ps
if ((BasicHandler $Result) -ne 1) {
    write-host $ActualStep" Failed: "(BasicHandler $Result)
    return 0
}
if ((LookCompletionStatus $NodeUrl $ps) -ne 1) {
    write-host $ActualStep" Failed: "(BasicHandler $Result)
    return 0
}

### 6. Deploying the SBA
$ActualStep = "6. Deploying the SBA"
$url = "https://$NodeUrl/rest/sbaconfig?action=deploy"
$Result = Invoke-RestMethod -Uri $url -Method POST -Body "" -WebSession $ps
if ((BasicHandler $Result) -ne 1) {
    write-host $ActualStep" Failed: "(BasicHandler $Result)
    return 0
}
if ((LookCompletionStatus $NodeUrl $ps) -ne 1) {
    write-host $ActualStep" Failed: "(BasicHandler $Result)
    return 0
}
 
$url = "https://$NodeUrl/rest/sbaconfig?action=startreplication"
$Result = Invoke-RestMethod -Uri $url -Method POST -Body "" -WebSession $ps
if ((BasicHandler $Result) -ne 1) {
    write-host $ActualStep" Failed: "(BasicHandler $Result)
    return 0
}
if ((LookCompletionStatus $NodeUrl $ps) -ne 1) {
    write-host $ActualStep" Failed: "(BasicHandler $Result)
    return 0
}
$url = "https://$NodeUrl/rest/sbaconfig?action=activatewithlync"
$Result = Invoke-RestMethod -Uri $url -Method POST -Body "" -WebSession $ps
if ((BasicHandler $Result) -ne 1) {
    write-host $ActualStep" Failed: "(BasicHandler $Result)
    return 0
}
if ((LookCompletionStatus $NodeUrl $ps) -ne 1) {
    write-host $ActualStep" Failed: "(BasicHandler $Result)
    return 0
}

### 7. Generate and Import an SBA Certificate
$ActualStep = "7. Generate and Import an SBA Certificate"
$BodyValue = "CA=$CA&CALogin=$CALogin&CAPassword=$CAPassword&Domain=$Domain&Email=$Email&Organization=$Organization&OU=$OU&City=$City&State=$State&Country=$Country&CsrTemplate=$CsrTemplate&KeySize=$KeySize"
$url = "https://$NodeUrl/rest/sbacsr?action=generatecsr"
$Result = Invoke-RestMethod -Uri $url -Method POST -Body $BodyValue -WebSession $ps

if ((BasicHandler $Result) -ne 1) {
    write-host $ActualStep" Failed: "(BasicHandler $Result)
    return 0
}

if ((LookCompletionStatus $NodeUrl $ps) -ne 1) {
    write-host $ActualStep" Failed: "(BasicHandler $Result)
    return 0
}

### 8. Starting the SBA Services
$ActualStep = "8. Starting the SBA Services"
$BodyValue = "serviceName=16"
$url = "https://$NodeUrl/rest/sbaconfig?action=enablesvc"
$Result = Invoke-RestMethod -Uri $url -Method POST -Body $BodyValue -WebSession $ps
if ((BasicHandler $Result) -ne 1) {
    write-host $ActualStep" Failed: "(BasicHandler $Result)
    return 0
}
if ((LookCompletionStatus $NodeUrl $ps) -ne 1) {
    write-host $ActualStep" Failed: "(BasicHandler $Result)
    return 0
}

### 9. Applying an SBA Security Template
$ActualStep = "9. Applying an SBA Security Template"
$BodyValue = "templateType=0&sbaInstallFilename=0"
$url = "https://$NodeUrl/rest/sbaconfig?action=applysectemplate"
$Result = Invoke-RestMethod -Uri $url -Method POST -Body $BodyValue -WebSession $ps
if ((BasicHandler $Result) -ne 1) {
    write-host $ActualStep" Failed: "(BasicHandler $Result)
    return 0
}
if ((LookCompletionStatus $NodeUrl $ps) -ne 1) {
    write-host $ActualStep" Failed: "(BasicHandler $Result)
    return 0
}
 
### 10. Install the Latest Lync SBA Cumulative Update

Space shortcuts

Page tree

Deploying an SBA Using REST

Prerequisites

Log into SBC REST API

Update the recovery partition with a new ASM image (Optional)

Query

Response

Action end on status

Re-initialize the ASM (Optional)

Retrieve available ASM images

Query

Response

Command to get the ASM image details based on the ID:

Query

Response

Command to apply a new ASM image based on the ASM Image details

Query

Response

Action end on status

Configuring the ASM IP Settings

Query

Response

Action end on status

Joining the ASM to the domain

Query

Response

Action end on status

Deploying the SBA

Command to prepare the SBA bits

Query

Response

Action end on status

Command to start the replication with Lync Server

Query

Response

Action end on status

Command to activate SBA with Lync Server

Query

Response

Action end on status

Generate and Import an SBA Certificate

Query

Response

Action end on status

Starting the SBA Services

Query

Response

Action end on status

Applying an SBA Security Template

Query

Response

Action end on status

Checking the SBA Status

SBA Login/Configuration/Status - Example