The Cards/Modules Status panel provides the following information:
- Location. Indicates the location of the module installed.
- Type. Indicates the physical type of hardware installed (DSP, FXS, FXO, etc., including number of licensed ports).
- Module Service Status. Indicates the service status of the module: Up (module is running) or Down (module is not running).
- Module State. Indicates the activation state of the module:
- Activated (module is activated)
- Activating (module is coming into service, module is not licensed, or module activation failure)
- Failed (module's service is down)
- Unknown (module's service is down or status is unknown).
Checking Cards and Modules Status
The information in the Cards/Modules status is in sync with the physical cards/module status in the node's Inventory Report.
To view any Card/Module's status:
- In the Ribbon SBC 1000/2000 WebUI, click the System tab.
On the System page, click the Overview tab.
Cards/Modules Status
Located in Overview Tab
When viewed in the WebUI, the Cards and Modules Status panel view is located approximately half way down the web page.
Overview
Content Tools