This page contains information that is re-used in the Sonus SBC 1000/2000 documentation.
Start with Getting Started Notice:
This section assumes that the Sonus SBC 1000/2000 system is already physically installed and running. If your Sonus SBC 1000/2000 system is not running, go to the Sonus SBC 1000/2000 Installation and Upgrade Guide and follow the setup instructions.
Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=getting-started-redirect|nopanel=true}
Do Not Connect Admin Port to Network
Do not connect the Admin port to your Ethernet network, as this may cause an IP address conflict.
Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=do-not-connect-mgmt|nopanel=true}
Sonus SBC 1000/2000 Hardware Service Warning
Review and follow the Sonus SBC 1000/2000 Safety Precautions before performing any service on the Sonus SBC 1000/2000 system.
Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=hw-service-warning|nopanel=true}
Interface Card Hotswap Warning
Warning for
that hot swap of interface cards is not supported.You must power down the Sonus SBC 1000/2000 system before installing or removing Interface Cards. Hot swapping of Interface Cards is not supported in
.Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=warn-icard-hotswap|nopanel=true}
Interface Card Hot Swap LED Warning
Warning for
that hot swap of interface cards is not supported.Do not remove the Interface Card while Hot Swap LED is ON. When the Hot Swap LED is on, Sonus SBC 1000/2000 is in the process of shutting down system resources associated with the interface card.
Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=warn-hotswap-led|nopanel=true}
Sonus SBC 1000/2000 1.2 Connecting Two or More Ports on the Same Bridge to the Same Switch Warning
Do not connect the two or more Sonus SBC 1000/2000 Ethernet ports that are mapped to the same Bridge to the same switch, as this can cause a network packet flood.
Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=warn-same-bridge|nopanel=true}
Generic Call Outage Warning
Performing this operation disrupts call services and should only be performed during a planned service outage window.
Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=warn-call-outage|nopanel=true}
Hardware Setup: Do Not Connect Cables Yet
DO NOT INSTALL ETHERSonus OR TELECOM CABLES. You must complete the Initial Configuration before connecting the Sonus SBC 1000/2000 system to your network.
Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=warn-no-com-cables|nopanel=true}
Domain Join May Impact ASM servers Warning
Joining the ASM to a domain may impact the availability of services on the ASM such as Remote Desktop (1,2,3) by denying access to these services through security policies. Before joining the ASM server to a domain, you should review your Domain's default security policy and Group policies to verify that required services and access are allowed. You may need to create exceptions for the ASM host to allow the use of services such as Remote Desktop.
Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=warn-asm-domain-join|nopanel=true}
Do not remove chassis cover warning
Do not remove the top panel of the Sonus SBC 1000/2000 chassis. Operating the Sonus SBC 1000/2000 system with the top panel removed will cause hardware components to overheat and fail. Unauthorized removal of the top panel will void your product warranty and service agreement.
Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=warn-cover-removal|nopanel=true}
Do not operate Sonus SBC 1000/2000 with chassis cover removed warning
Do not attempt to operate Sonus SBC 1000/2000 with the top chassis panel removed as this interferes with the cooling design of the system. Operating the Sonus SBC 1000/2000 system with the cover removed will cause hardware components to overheat and fail.
Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=warn-operating-with-cover-removed|nopanel=true}
Software downloads
To obtain software updates for Sonus SBC 1000/2000 and other Sonus products, visit the Sonus software downloads site.
Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=info-software-downloads|nopanel=true}
CAS R2 Signaling not supported in Sonus SBC 1000/2000 version 2.0
CAS R2 Signaling is not supported in version 2.0.0. This feature is scheduled for version 2.0.1.
Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=cas-r2-not-supported|nopanel=true}
SHA2-256 Certificate Usage Caution
SHA2-256 Certificate Compatibility
SHA2-256 CA Certificates may be used for the SBA and SBC.
Wiki Markup to include the above Excerpt
{multi-excerpt-include:pageTitle=_BoilerPlate|name=sha2-256-certificate-compatibility|nopanel=true}
_ASM_Management_Prerequisite
_ASM_Shutdown_Remotedesktop_Warning
_channel_detail_info_pages
_channel_detail_info_pages_pt1
_channel_detail_info_pages_pt2
_Delete_Entry_Procedure
_Disable_Entry
_Enable_Entry
_Modify_Entry
_Modify_Entry_Icon_Only
_Modify_Entry_No_Link
_Modify_Table
_Multiselect_Widget
_Resequence_Entry
_Sonus SBC1000-2000_Reboot_Tip_Duration
_Sonus SBC 2000_Admin_Port_Warning
_UC_Setup_UI_Progress_Indicator_Info
_UX1000_Board_Assignments
_UX2000_Application_IP_Bridge_Warning
_UX_Upgrade_Warning
_View_Call_Counters
_View_Entry_Values
_Object_within_Object
_Teams_Routing_Prerequisites_SWeEdge_SBC1K2K
Overview
Content Tools