To create or modify a Remote Log Server

  1. In the WebUI, click the Settings tab. 
  2. In the left navigation pane, go to Logging Configuration > Remote Log Servers.

Remote Log Configuration

Modifying a Remote Log Server

  1. Click the expand () Icon next to the entry you wish to modify.
  2. Edit the entry properties as required, see details below.

Creating a Remote Log Server

  1. Click the Create Remote Log ( ) icon at the top of the Remote Log Configuration page.

  2. Configure the fields and click OK.  See below for valid configuration entries. 

    Field

    Description

    EnabledEnables/disables the log server. Valid selection: Yes (Enables the log server) or No (Does not enable the log server).
    Global Log Level

    The log level for the syslog server. Available levels:

    Warning. An error is detected, probably from an external source, which may require operator intervention. A call or other connection may have failed, or be in danger of failing.

    Informational. Includes call path and connection tracing information. This level and higher is sufficient to troubleshoot all configuration, setup, and interoperability issues.

    Error. An error is detected from an internal source, which may require operator intervention. A call has failed or capacity is reduced.

    Fatal. An error so severe that the entire system is in danger of shutdown or reboot. This condition has probably triggered one or more alarms as well.

    Log DestinationFully Qualified Domain Name (FQDN) of the log server to add.
    Log Facility

    Controls which Syslog Facility to use when sending log entries. You can use this to facilitate the sorting of messages from different nodes on a central Syslog server.

    PortLog server port. 
    Protocol

    Protocol for communicating with the log server. Valid selection: TCP, UDP or TLS.