In this section:

Accessing the Static IP Route Table

  1. In the WebUI, click the Settings tab.

  2. In the left navigation pane, go to Protocols > IP > Static Routes

    Note

    Two default routes are allowed with different metric values but are only relevant when used with link monitoring.

    See the following image for an example of two default routes. 

Creating an Entry in a Static IP Route Table

Click the Create Static IP Route () icon at the top of the Static IP Route Table page.


Destination IP

Specifies the destination IP Address

Mask

Specifies the network mask of the destination host or subnet. If the 'Destination IP Address' field and 'Mask' field are both 0.0.0.0, the static route is called 'default static route'.

Gateway

Specifies the IP Address of the next-hop router to use for this Static Route.

Metric

Specifies the cost of this route and hence indirectly specifies the preference of the route. Lower values indicate more preferred routes. Typical value is 1 for most static routes indicating that static routes are preferred to dynamic routes.